diff options
Diffstat (limited to 'recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh')
| -rwxr-xr-x | recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh b/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh new file mode 100755 index 0000000..02754a6 --- /dev/null +++ b/recipes-bsp/multitech/get-eeprom-device-config/get-eeprom-device-config.sh @@ -0,0 +1,278 @@ +#!/bin/bash +# Radio ID loop count +TRY_COUNT=30 + +CONFIG_PATH=/var/run/config + +#system capabilities +CAPABILITY_ADC="false" +CAPABILITY_BLUETOOTH="false" +CAPABILITY_DIN="false" +CAPABILITY_DOUT="false" +#CAPABILITY_EXTERNAL_SERIAL_PORT="false" +#CAPABILITY_FLEXIBLE_SERIAL_PORT="false" +CAPABILITY_GPS="false" +CAPABILITY_WIFI="false" +CAPABILITY_CELL="false" +CAPABILITY_LORA="false" +CAPABILITY_GPIO="false" +CAPABILITY_SERIAL="false" +CAPABILITY_RS232="false" +CAPABILITY_RS422="false" +CAPABILITY_RS485="false" +CAPABILITY_NODE_RED="false" +CAPABILITY_LORA_NETWORK_SERVER="false" + + +# accessory cards constans +TEMP_AC_PATH="/var/volatile/tmp" +TEMP_AC_JSON="$TEMP_AC_PATH/ac_data.json" +# Number of accessory card places - size of array +AC_CARD_COUNT=4 + +function usage { + echo 'get-eeprom-device-info [-t TRY_COUNT]' + echo ' Where TRY_COUNT is the number of half' + echo ' second waits for the cellular radio' + echo ' to be ready for identification' + exit 1 +} + +# Reads accessory cards data +# WARNING: Make sure function called after CAPABILITIY_* variables is set with initial values. +ReadAcData() { + # Doing the same as mts-io-sysfs, but with one step, without unnesesary parsing. + MTS_IO_DIR="/sys/devices/platform/mts-io" + AC_PRFIX="ap" + TEMP_AC_FILE_PREFIX="/card" + TEMP_AC_PREFIX="$TEMP_AC_PATH$TEMP_AC_FILE_PREFIX" + # Fill property data for each accessory card + rm -f $TEMP_AC_PREFIX* + for f in `find $MTS_IO_DIR/$AC_PRFIX* -follow -maxdepth 1 -type f -follow -maxdepth 1 -type f 2>/dev/null`; + do + FILENAME=${f##*$MTS_IO_DIR/$AC_PRFIX} + case $FILENAME in + modalias ) + ;; + power ) + ;; + subsystem* ) + ;; + uevent ) + ;; + * ) + AC_NUMBER=$(echo "$FILENAME" | cut -d "/" -f1) + AC_PROP=$(echo "$FILENAME" | cut -d "/" -f2) + # Do camel casing + # Because {sed -r '{s/-([a-z])/\U\1/g;}'} did not work for Not GNU sed 4.0 use awk + tr + # Removing next 2 lines gives about 50% function speed-up + AC_PROP=$( echo $AC_PROP | awk -F"-" '{for(j=1;j<=NF;j++){$j=toupper(substr($j,1,1))substr($j,2)}}1' | sed -r '{s/ //g;}' ) + AC_PROP=`echo ${AC_PROP:0:1} | tr '[A-Z]' '[a-z]'`${AC_PROP:1} + #Output to temp file + AC_FILE="$TEMP_AC_PREFIX$AC_NUMBER" + printf "\"$AC_PROP\" : \"%s\",\n" `cat $f` >> $AC_FILE + ;; + esac + done + # Compose accessory cards data to array + echo "\"accessoryCards\" : [ " > $TEMP_AC_JSON + for ((I=1; I<=$AC_CARD_COUNT; ++I)) ; + do + AC_FILE="$TEMP_AC_PREFIX$I" + if [ -f "$AC_FILE" ];then + sed -i '$s/,$//' $AC_FILE # remove last comma + echo "{" >> $TEMP_AC_JSON + cat $AC_FILE >> $TEMP_AC_JSON + echo "}," >> $TEMP_AC_JSON + + # Map product-id with capabilities. + if $(grep -q '"productId" : "MTAC-MFSER-DTE"' $AC_FILE) || $(grep -q '"productId" : "MTAC-MFSER-DCE"' $AC_FILE); then + CAPABILITY_SERIAL="true" + CAPABILITY_RS232="true" + CAPABILITY_RS422="true" + CAPABILITY_RS485="true" + elif $(grep -q '"productId" : "MTAC-GPIOB"' $AC_FILE) || $(grep -q '"productId" : "MTAC-GPIOI"' $AC_FILE); then + CAPABILITY_GPIO="true" + CAPABILITY_ADC="true" + CAPABILITY_DIN="true" + CAPABILITY_DOUT="true" + elif $(grep -q '"productId" : "MTAC-LORA-.*"' $AC_FILE); then + CAPABILITY_LORA="true" + fi + else + echo "null," >> $TEMP_AC_JSON + fi + done + sed -i '$s/,$//' $TEMP_AC_JSON # remove last comma + echo "]," >> $TEMP_AC_JSON +} + +#check if LORA is present onboard a device. +#Lora capability from an MTAC card is determined by ReadAcData() +isNativeLoraPresent() { + LORA_ID_PREFIX="MTCAP-LORA-" + LORA_ID=$(mts-io-sysfs show lora/product-id 2> /dev/null) + if [[ $LORA_ID == $LORA_ID_PREFIX* ]]; then + return 0 + else + return 1 + fi +} + +TEMP=$(getopt -o t: -n 'get-eeprom-device-info' -- "$@") +eval set -- "$TEMP" +# extract options and their arguments into variables. +while true ; do + case "$1" in + -t) + case "$2" in + "") usage ;; + *) TRY_COUNT=$2 ; shift 2 ;; + esac ;; + --) shift ; break ;; + *) echo "usage" ;; + esac +done + +# Read device information from eeprom device + +mts-id-eeprom --in-file /sys/bus/i2c/devices/i2c-0/0-0056/eeprom > ${CONFIG_PATH}/device_info + +DEVICE_CAPA=${CONFIG_PATH}/device_capa +DEVICE_INFO_JSON=${CONFIG_PATH}/device_info.json + +# Create json data files +echo "{" > $DEVICE_CAPA +echo "{" > ${CONFIG_PATH}/device_info.json + + +# Read each line and parse the device data +while read line +do + +if [[ $line =~ ^vendor-id:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/vendor_id + echo \"vendorId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^product-id:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_type + echo \"productId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^device-id:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/device_id + echo \"deviceId\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^hw-version:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/hw_version + echo \"hardwareVersion\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^mac-addr:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_addr + echo \"macAddress\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^mac-bluetooth:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_bluetooth + echo \"macBluetooth\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^mac-wifi:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/mac_wifi + echo \"macWifi\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^uuid:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/uuid + echo \"uuid\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ ^imei:\ \"(.*)\" ]]; then + echo ${BASH_REMATCH[1]} > ${CONFIG_PATH}/modem_imei + echo \"imei\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ capa-gps:\ (.*) ]]; then + CAPABILITY_GPS=$(echo ${BASH_REMATCH[1]}) +elif [[ $line =~ capa-din:\ (.*) ]]; then + CAPABILITY_DIN=$(echo ${BASH_REMATCH[1]}) +elif [[ $line =~ capa-dout:\ (.*) ]]; then + CAPABILITY_DOUT=$(echo ${BASH_REMATCH[1]}) +elif [[ $line =~ capa-adc:\ (.*) ]]; then + CAPABILITY_ADC=$(echo ${BASH_REMATCH[1]}) +elif [[ $line =~ capa-wifi:\ (.*) ]]; then + CAPABILITY_WIFI=$(echo ${BASH_REMATCH[1]}) +elif [[ $line =~ capa-bluetooth:\ (.*) ]]; then + CAPABILITY_BLUETOOTH=$(echo ${BASH_REMATCH[1]}) +elif [[ $line =~ capa:\ \"(.*)\" ]]; then + echo \"mask\": \"${BASH_REMATCH[1]}\", >> $DEVICE_CAPA +fi + +done <${CONFIG_PATH}/device_info + +echo "Finding cellular module..." +for ((i=0; i < TRY_COUNT; i++)) + do + # Check cellular module + echo "Try #"$i + if [[ -L "/dev/modem_at0" && -L "/dev/modem_at1" ]]; then + CAPABILITY_CELL="true" + break + fi + if ((TRY_COUNT > 1)) ; then + sleep 0.5 + fi + done + +if isNativeLoraPresent; then + CAPABILITY_LORA="true" +fi + +# +# Check if NODE-RED and Lora Network Server packages are installed +# +OPKG_FILE=/tmp/opkg_inst.tmp +opkg list-installed > $OPKG_FILE + +cat $OPKG_FILE | grep node-red > /dev/null +[ $? -eq 0 ] && CAPABILITY_NODE_RED="true" + +cat $OPKG_FILE | grep lora-network-server > /dev/null +[ $? -eq 0 ] && CAPABILITY_LORA_NETWORK_SERVER="true" + +rm -f $OPKG_FILE + + +# Read firmware info from /etc/issue +cat /etc/issue | +( +while read line +do + +if [[ $line =~ Version:\ (.*) ]]; then + echo \"firmware\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +elif [[ $line =~ Date:\ (.*) ]]; then + echo \"firmwareDate\": \"${BASH_REMATCH[1]}\", >> $DEVICE_INFO_JSON +fi + +done +) +# Add accessory cards +echo "Reading accessory cards data" +ReadAcData +echo "Adding accessory cards data" +cat $TEMP_AC_JSON >> $DEVICE_INFO_JSON + +# Complete the json files +echo \"adc\": $CAPABILITY_ADC, >> $DEVICE_CAPA +echo \"bluetooth\": $CAPABILITY_BLUETOOTH, >> $DEVICE_CAPA +echo \"din\": $CAPABILITY_DIN, >> $DEVICE_CAPA +echo \"dout\": $CAPABILITY_DOUT, >> $DEVICE_CAPA +echo \"gps\": $CAPABILITY_GPS, >> $DEVICE_CAPA +echo \"wifi\": $CAPABILITY_WIFI, >> $DEVICE_CAPA +echo \"cell\": $CAPABILITY_CELL, >> $DEVICE_CAPA +echo \"lora\": $CAPABILITY_LORA, >> $DEVICE_CAPA +echo \"gpio\": $CAPABILITY_GPIO, >> $DEVICE_CAPA +echo \"serial\": $CAPABILITY_SERIAL, >> $DEVICE_CAPA +echo \"rs232\": $CAPABILITY_RS232, >> $DEVICE_CAPA +echo \"rs422\": $CAPABILITY_RS422, >> $DEVICE_CAPA +echo \"rs485\": $CAPABILITY_RS485, >> $DEVICE_CAPA +echo \"nodeRed\": $CAPABILITY_NODE_RED, >> $DEVICE_CAPA +echo \"loraNetworkServer\": $CAPABILITY_LORA_NETWORK_SERVER >> $DEVICE_CAPA +echo "}" >> $DEVICE_CAPA +echo \"capabilities\": >> $DEVICE_INFO_JSON +cat $DEVICE_CAPA >> $DEVICE_INFO_JSON +echo "}" >> $DEVICE_INFO_JSON + +# Clean up temp files +rm $DEVICE_CAPA +rm ${CONFIG_PATH}/device_info + +#echo device_info.json ---------- +#cat /var/run/config/device_info.json +#echo --------------------------- |