diff options
Diffstat (limited to 'recipes-bsp/at91bootstrap')
23 files changed, 1260 insertions, 463 deletions
diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/.at91bootstrap-3.5.2-onetime-slow-clock-switch.patch.swp b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/.at91bootstrap-3.5.2-onetime-slow-clock-switch.patch.swp Binary files differdeleted file mode 100644 index f31477d..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/.at91bootstrap-3.5.2-onetime-slow-clock-switch.patch.swp +++ /dev/null diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.2-add-install.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.2-add-install.patch deleted file mode 100644 index 6f007b9..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.2-add-install.patch +++ /dev/null @@ -1,20 +0,0 @@ -Index: at91bootstrap-3.5.2/Makefile -=================================================================== ---- at91bootstrap-3.5.2.orig/Makefile 2013-02-08 14:38:40.660054339 -0600 -+++ at91bootstrap-3.5.2/Makefile 2013-02-08 14:41:30.626272862 -0600 -@@ -359,4 +359,15 @@ - - PHONY+=tarball tarballx - -+install: -+ -install -d $(DESTDIR) -+ install $(AT91BOOTSTRAP) $(DESTDIR)/$(IMAGE) -+ -rm -f $(DESTDIR)/$(SYMLINK) -+ (cd ${DESTDIR} ; \ -+ ln -sf ${IMAGE} ${SYMLINK} \ -+ ) -+ -+ -+PHONY+=install -+ - .PHONY: $(PHONY) diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-disable-rtc-interrupts.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-disable-rtc-interrupts.patch deleted file mode 100644 index e5dd013..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-disable-rtc-interrupts.patch +++ /dev/null @@ -1,27 +0,0 @@ -Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c -=================================================================== ---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5ek.c 2015-12-21 15:42:05.498892917 -0600 -+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c 2015-12-22 14:53:59.151521592 -0600 -@@ -46,6 +46,9 @@ - - #include "onewire_info.h" - -+#define RTC_SCCR 0x1C -+#define RTC_IDR 0x24 -+ - #ifdef CONFIG_USER_HW_INIT - extern void hw_init_hook(void); - #endif -@@ -207,6 +210,12 @@ - #ifdef CONFIG_USER_HW_INIT - hw_init_hook(); - #endif -+ -+ /* disable all RTC interrupts and clear status register. -+ * Prevents possible Linux lockup due to unexpected RTC interrupt -+ */ -+ writel(0xFF, RTC_IDR + AT91C_BASE_RTC); -+ writel(0xFF, RTC_SCCR + AT91C_BASE_RTC); - } - #endif /* #ifdef CONFIG_HW_INIT */ - diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch deleted file mode 100644 index 92a3a3b..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtcdt.patch +++ /dev/null @@ -1,129 +0,0 @@ -Index: git/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig -=================================================================== ---- git.orig/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig 2015-01-13 13:31:45.162884794 -0600 -+++ git/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig 2015-01-13 13:45:17.967816395 -0600 -@@ -1,6 +1,6 @@ - # - # Automatically generated make config: don't edit --# Thu Apr 11 16:45:29 2013 -+# Tue Jan 13 13:09:23 2015 - # - HAVE_DOT_CONFIG=y - CONFIG_BOARDNAME="at91sam9x5ek" -@@ -42,7 +42,7 @@ - ALLOW_PIO3=y - CONFIG_HAS_PIO3=y - CPU_HAS_PMECC=y --CONFIG_LOAD_ONE_WIRE=y -+# CONFIG_LOAD_ONE_WIRE is not set - # CONFIG_MMC_SUPPORT is not set - - # -@@ -60,8 +60,8 @@ - # ALLOW_SDRAM_16BIT is not set - # CONFIG_RAM_32MB is not set - # CONFIG_RAM_64MB is not set --CONFIG_RAM_128MB=y --# CONFIG_RAM_256MB is not set -+# CONFIG_RAM_128MB is not set -+CONFIG_RAM_256MB=y - # CONFIG_RAM_512MB is not set - # CONFIG_DATAFLASH is not set - # CONFIG_FLASH is not set -@@ -81,8 +81,8 @@ - # - # PMECC Configuration - # --CONFIG_PMECC_CORRECT_BITS_2=y --# CONFIG_PMECC_CORRECT_BITS_4 is not set -+# CONFIG_PMECC_CORRECT_BITS_2 is not set -+CONFIG_PMECC_CORRECT_BITS_4=y - # CONFIG_PMECC_CORRECT_BITS_8 is not set - # CONFIG_PMECC_CORRECT_BITS_12 is not set - # CONFIG_PMECC_CORRECT_BITS_24 is not set -@@ -101,7 +101,7 @@ - # CONFIG_LOAD_64KB is not set - CONFIG_IMG_ADDRESS="0x00040000" - CONFIG_IMG_SIZE="0x00080000" --CONFIG_JUMP_ADDR="0x26F00000" -+CONFIG_JUMP_ADDR="0x2EF00000" - - # - # U-Boot Image Storage Setup -@@ -116,4 +116,4 @@ - # CONFIG_USER_HW_INIT is not set - CONFIG_THUMB=y - CONFIG_SCLK=y --CONFIG_DISABLE_WATCHDOG=y -+# CONFIG_DISABLE_WATCHDOG is not set -Index: git/board/at91sam9x5ek/at91sam9x5ek.c -=================================================================== ---- git.orig/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-04 15:49:54.143358228 -0500 -+++ git/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-04 17:07:51.999219741 -0500 -@@ -53,6 +53,32 @@ - extern void hw_init_hook(void); - #endif - -+ -+static void initialize_mt_gpio(void) -+{ -+ /* Configure DBGU pins */ -+ const struct pio_desc mt_gpio_pins[] = { -+ /* Misc. pins -- Pins PD15-PD18 belong to PERIPH -+ * B A20-A25 until bootstrap shuts them down. -+ * This code prevents these pins from being used -+ * during boot, since we do not -+ * need these pins to boot the system and we -+ * do not want resets to toggle needlessly. -+ */ -+ {"WFBT-RESET",AT91C_PIN_PD(14), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"GNSS-RESET",AT91C_PIN_PD(15), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"SECURE-RESET",AT91C_PIN_PD(16), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"MTQ-RESET",AT91C_PIN_PD(17), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"USBHUB-RESET",AT91C_PIN_PD(18), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"GNSS-INT",AT91C_PIN_PD(19), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"WIFI-BT-LPMODE",AT91C_PIN_PD(20), 0, PIO_PULLUP, PIO_INPUT}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ pio_configure(mt_gpio_pins); -+} -+ -+ - static void at91_dbgu_hw_init(void) - { - /* Configure DBGU pins */ -@@ -198,6 +223,9 @@ - slowclk_enable_osc32(); - #endif - -+ /* Initialize MT GPIO */ -+ initialize_mt_gpio(); -+ - /* Initialize dbgu */ - initialize_dbgu(); - -@@ -322,10 +350,8 @@ - - reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); - reg |= AT91C_EBI_CS3A_SM; -- if (get_cm_rev() == 'A') -- reg &= ~AT91C_EBI_NFD0_ON_D16; -- else -- reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); -+ /* MTCDT */ -+ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); - - reg &= ~AT91C_EBI_DRV; - writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); -@@ -355,9 +381,7 @@ - AT91C_BASE_SMC + SMC_CTRL3); - - /* Configure the PIO controller */ -- if (get_cm_rev() == 'A') -- pio_configure(nand_pins_lo); -- else -+ /* MTCDT */ - pio_configure(nand_pins_hi); - - writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC)); diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch deleted file mode 100644 index 0a7600d..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch +++ /dev/null @@ -1,102 +0,0 @@ -Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig -=================================================================== ---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig 2013-04-11 05:07:35.000000000 -0500 -+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig 2013-04-29 15:13:01.390913836 -0500 -@@ -42,7 +42,8 @@ - ALLOW_PIO3=y - CONFIG_HAS_PIO3=y - CPU_HAS_PMECC=y --CONFIG_LOAD_ONE_WIRE=y -+# MTS: don't load one wire -+# CONFIG_LOAD_ONE_WIRE is not set - # CONFIG_MMC_SUPPORT is not set - - # -@@ -81,8 +82,8 @@ - # - # PMECC Configuration - # --CONFIG_PMECC_CORRECT_BITS_2=y --# CONFIG_PMECC_CORRECT_BITS_4 is not set -+# CONFIG_PMECC_CORRECT_BITS_2 is not set -+CONFIG_PMECC_CORRECT_BITS_4=y - # CONFIG_PMECC_CORRECT_BITS_8 is not set - # CONFIG_PMECC_CORRECT_BITS_12 is not set - # CONFIG_PMECC_CORRECT_BITS_24 is not set -@@ -116,4 +117,5 @@ - # CONFIG_USER_HW_INIT is not set - CONFIG_THUMB=y - CONFIG_SCLK=y --CONFIG_DISABLE_WATCHDOG=y -+# MTS: don't disable watchdog -+# CONFIG_DISABLE_WATCHDOG is not set -Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c -=================================================================== ---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-04 15:49:54.143358228 -0500 -+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-04 17:31:57.691176941 -0500 -@@ -53,6 +53,31 @@ - extern void hw_init_hook(void); - #endif - -+ -+static void initialize_mt_gpio(void) -+{ -+ /* Configure DBGU pins */ -+ const struct pio_desc mt_gpio_pins[] = { -+ /* Misc. pins -- Pins PD15-PD18 belong to PERIPH -+ * B A20-A25 until bootstrap shuts them down. -+ * This code prevents these pins from being used -+ * during boot, since we do not -+ * need these pins to boot the system and we -+ * do not want resets to toggle needlessly. -+ */ -+ {"GNSS-RESET",AT91C_PIN_PD(15), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"SECURE-RESET",AT91C_PIN_PD(16), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"MTQ-RESET",AT91C_PIN_PD(17), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"USBHUB-RESET",AT91C_PIN_PD(18), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"GNSS-INT",AT91C_PIN_PD(19), 1, PIO_PULLUP, PIO_OUTPUT}, -+ {"WIFI-BT-LPMODE",AT91C_PIN_PD(20), 0, PIO_PULLUP, PIO_INPUT}, -+ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, -+ }; -+ -+ pio_configure(mt_gpio_pins); -+} -+ -+ - static void at91_dbgu_hw_init(void) - { - /* Configure DBGU pins */ -@@ -198,6 +223,9 @@ - slowclk_enable_osc32(); - #endif - -+ /* Initialize MT GPIO */ -+ initialize_mt_gpio(); -+ - /* Initialize dbgu */ - initialize_dbgu(); - -@@ -322,10 +350,8 @@ - - reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); - reg |= AT91C_EBI_CS3A_SM; -- if (get_cm_rev() == 'A') -- reg &= ~AT91C_EBI_NFD0_ON_D16; -- else -- reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); -+ /* MTR */ -+ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); - - reg &= ~AT91C_EBI_DRV; - writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); -@@ -355,9 +381,7 @@ - AT91C_BASE_SMC + SMC_CTRL3); - - /* Configure the PIO controller */ -- if (get_cm_rev() == 'A') -- pio_configure(nand_pins_lo); -- else -+ /* MTR2 */ - pio_configure(nand_pins_hi); - - writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC)); diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch deleted file mode 100644 index 912a891..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch +++ /dev/null @@ -1,34 +0,0 @@ -Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c -=================================================================== ---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5ek.c 2015-09-29 09:55:07.335113881 -0500 -+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c 2015-09-29 10:13:19.397489104 -0500 -@@ -81,7 +81,8 @@ - | AT91C_DDRC2_CAS_3 /* CAS Latency 3 */ - | AT91C_DDRC2_NB_BANKS_8 /* 8 banks */ - | AT91C_DDRC2_DLL_RESET_DISABLED /* DLL not reset */ -- | AT91C_DDRC2_DECOD_INTERLEAVED);/*Interleaved decode*/ -+ | AT91C_DDRC2_DIC_DS /* Low DDR Drive Strength */ -+ | AT91C_DDRC2_DECOD_INTERLEAVED);/* Interleaved decode*/ - - /* - * Make sure to uncomment the following line if the DDR controller -Index: at91bootstrap-3.5.3/main.c -=================================================================== ---- at91bootstrap-3.5.3.orig/main.c 2013-04-11 05:07:35.000000000 -0500 -+++ at91bootstrap-3.5.3/main.c 2015-09-29 10:10:21.354971492 -0500 -@@ -68,12 +68,15 @@ - { - char *version = "AT91Bootstrap"; - char *ver_num = " "AT91BOOTSTRAP_VERSION" ("COMPILE_TIME")"; -+ char *feature = "DDR Drive Strength: low"; - - dbgu_print("\n\r"); - dbgu_print("\n\r"); - dbgu_print(version); - dbgu_print(ver_num); - dbgu_print("\n\r"); -+ dbgu_print(feature); -+ dbgu_print("\n\r"); - dbgu_print("\n\r"); - } - diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-remove-std-includes.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-remove-std-includes.patch deleted file mode 100644 index 01920c2..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-remove-std-includes.patch +++ /dev/null @@ -1,12 +0,0 @@ -Index: at91bootstrap-3.5.3/driver/debug.c -=================================================================== ---- at91boostrap-3.5.3.orig/driver/debug.c.orig 2017-02-13 16:14:17.214217038 -0600 -+++ at91boostrap-3.5.3/driver/debug.c 2017-02-13 15:48:44.106262425 -0600 -@@ -27,7 +27,6 @@ - */ - #include "dbgu.h" - #include "debug.h" --#include <stdio.h> - #include <stdarg.h> - - #define MAX_BUFFER 128 diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91bootstrap-3.8-mtcdt.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91bootstrap-3.8-mtcdt.patch new file mode 100644 index 0000000..f299d30 --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91bootstrap-3.8-mtcdt.patch @@ -0,0 +1,76 @@ +diff -aNru orig/board/at91sam9x5ek/at91sam9x5ek.c new/board/at91sam9x5ek/at91sam9x5ek.c +--- orig/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-16 14:20:15.036823256 -0500 ++++ new/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-16 14:26:10.648812728 -0500 +@@ -44,6 +44,31 @@ + #include "at91sam9x5ek.h" + #include "board_hw_info.h" + ++ ++static void initialize_mt_gpio(void) ++{ ++ /* Configure DBGU pins */ ++ const struct pio_desc mt_gpio_pins[] = { ++ /* Misc. pins -- Pins PD15-PD18 belong to PERIPH ++ * B A20-A25 until bootstrap shuts them down. ++ * This code prevents these pins from being used ++ * during boot, since we do not ++ * need these pins to boot the system and we ++ * do not want resets to toggle needlessly. ++ */ ++ {"GNSS-RESET",AT91C_PIN_PD(15), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"SECURE-RESET",AT91C_PIN_PD(16), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"MTQ-RESET",AT91C_PIN_PD(17), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"USBHUB-RESET",AT91C_PIN_PD(18), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"GNSS-INT",AT91C_PIN_PD(19), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"WIFI-BT-LPMODE",AT91C_PIN_PD(20), 0, PIO_PULLUP, PIO_INPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ pio_configure(mt_gpio_pins); ++} ++ ++ + static void at91_dbgu_hw_init(void) + { + /* Configure DBGU pins */ +@@ -185,6 +210,9 @@ + /* Init timer */ + timer_init(); + ++ /* Initialize MT GPIO */ ++ initialize_mt_gpio(); ++ + /* Initialize dbgu */ + initialize_dbgu(); + +@@ -298,10 +326,14 @@ + + reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); + reg |= AT91C_EBI_CS3A_SM; ++#ifdef NOTMTCDT + if (get_cm_rev() == 'A') + reg &= ~AT91C_EBI_NFD0_ON_D16; + else + reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); ++#endif /* NOTMTCDT */ ++ /* MTCDT */ ++ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); + + reg &= ~AT91C_EBI_DRV; + writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); +@@ -331,11 +363,15 @@ + AT91C_BASE_SMC + SMC_CTRL3); + + /* Configure the PIO controller */ ++#ifdef NOTMTCDT + if (get_cm_rev() == 'A') + pio_configure(nand_pins_lo); + else ++#endif /* NOTMTCDT */ ++ /* MTCDT */ + pio_configure(nand_pins_hi); + ++ + pmc_enable_periph_clock(AT91C_ID_PIOC_D); + } + #endif /* #ifdef CONFIG_NANDFLASH */ diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91bootstrap-3.8-mtr.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91bootstrap-3.8-mtr.patch new file mode 100644 index 0000000..2993323 --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91bootstrap-3.8-mtr.patch @@ -0,0 +1,414 @@ +diff -aNru orig/board/at91sam9x5ek/at91sam9x5ek.c new/board/at91sam9x5ek/at91sam9x5ek.c +--- orig/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-16 14:20:15.036823256 -0500 ++++ new/board/at91sam9x5ek/at91sam9x5ek.c 2019-04-16 14:42:16.920784122 -0500 +@@ -44,6 +44,31 @@ + #include "at91sam9x5ek.h" + #include "board_hw_info.h" + ++ ++static void initialize_mt_gpio(void) ++{ ++ /* Configure DBGU pins */ ++ const struct pio_desc mt_gpio_pins[] = { ++ /* Misc. pins -- Pins PD15-PD18 belong to PERIPH ++ * B A20-A25 until bootstrap shuts them down. ++ * This code prevents these pins from being used ++ * during boot, since we do not ++ * need these pins to boot the system and we ++ * do not want resets to toggle needlessly. ++ */ ++ {"PD15",AT91C_PIN_PD(15), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"PD16",AT91C_PIN_PD(16), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"PD17",AT91C_PIN_PD(17), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"PD18",AT91C_PIN_PD(18), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"PD19",AT91C_PIN_PD(19), 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"PD20IN",AT91C_PIN_PD(20), 0, PIO_PULLUP, PIO_INPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ pio_configure(mt_gpio_pins); ++} ++ ++ + static void at91_dbgu_hw_init(void) + { + /* Configure DBGU pins */ +@@ -185,6 +210,9 @@ + /* Init timer */ + timer_init(); + ++ /* Initialize MT GPIO */ ++ initialize_mt_gpio(); ++ + /* Initialize dbgu */ + initialize_dbgu(); + +@@ -298,10 +326,8 @@ + + reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); + reg |= AT91C_EBI_CS3A_SM; +- if (get_cm_rev() == 'A') +- reg &= ~AT91C_EBI_NFD0_ON_D16; +- else +- reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); ++ /* MTR */ ++ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); + + reg &= ~AT91C_EBI_DRV; + writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); +@@ -331,9 +357,7 @@ + AT91C_BASE_SMC + SMC_CTRL3); + + /* Configure the PIO controller */ +- if (get_cm_rev() == 'A') +- pio_configure(nand_pins_lo); +- else ++ /* MTR2 */ + pio_configure(nand_pins_hi); + + pmc_enable_periph_clock(AT91C_ID_PIOC_D); +diff -aNru orig/board/at91sam9x5ek/at91sam9x5ek.c.orig new/board/at91sam9x5ek/at91sam9x5ek.c.orig +--- orig/board/at91sam9x5ek/at91sam9x5ek.c.orig 1969-12-31 18:00:00.000000000 -0600 ++++ new/board/at91sam9x5ek/at91sam9x5ek.c.orig 2019-04-16 14:20:15.036823256 -0500 +@@ -0,0 +1,341 @@ ++/* ---------------------------------------------------------------------------- ++ * ATMEL Microcontroller Software Support ++ * ---------------------------------------------------------------------------- ++ * Copyright (c) 2008, Atmel Corporation ++ * ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * ++ * - Redistributions of source code must retain the above copyright notice, ++ * this list of conditions and the disclaimer below. ++ * ++ * Atmel's name may not be used to endorse or promote products derived from ++ * this software without specific prior written permission. ++ * ++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "common.h" ++#include "hardware.h" ++#include "arch/at91_ccfg.h" ++#include "arch/at91_rstc.h" ++#include "arch/at91_pmc.h" ++#include "arch/at91_smc.h" ++#include "arch/at91_pio.h" ++#include "arch/at91_ddrsdrc.h" ++#include "gpio.h" ++#include "pmc.h" ++#include "usart.h" ++#include "debug.h" ++#include "ddramc.h" ++#include "timer.h" ++#include "watchdog.h" ++#include "string.h" ++#include "at91sam9x5ek.h" ++#include "board_hw_info.h" ++ ++static void at91_dbgu_hw_init(void) ++{ ++ /* Configure DBGU pins */ ++ const struct pio_desc dbgu_pins[] = { ++ {"RXD", AT91C_PIN_PA(9), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"TXD", AT91C_PIN_PA(10), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ pmc_enable_periph_clock(AT91C_ID_PIOA_B); ++ pio_configure(dbgu_pins); ++} ++ ++static void initialize_dbgu(void) ++{ ++ at91_dbgu_hw_init(); ++ usart_init(BAUDRATE(MASTER_CLOCK, BAUD_RATE)); ++} ++ ++#ifdef CONFIG_DDR2 ++/* Using the Micron MT47H64M16HR-3 */ ++static void ddramc_reg_config(struct ddramc_register *ddramc_config) ++{ ++ ddramc_config->mdr = (AT91C_DDRC2_DBW_16_BITS ++ | AT91C_DDRC2_MD_DDR2_SDRAM); ++ ++ ddramc_config->cr = (AT91C_DDRC2_NC_DDR10_SDR9 /* 10 column bits(1K) */ ++ | AT91C_DDRC2_NR_13 /* 13 row bits (8K) */ ++ | AT91C_DDRC2_CAS_3 /* CAS Latency 3 */ ++ | AT91C_DDRC2_NB_BANKS_8 /* 8 banks */ ++ | AT91C_DDRC2_DISABLE_RESET_DLL ++ | AT91C_DDRC2_DECOD_INTERLEAVED);/*Interleaved decode*/ ++ ++ /* ++ * Make sure to uncomment the following line if the DDR controller ++ * shares the EBI with another memory controller (SMC, NAND,..). ++ * For instance, AT91C_DDRC2_EBISHARE shall be set if NAND flash ++ * data line 0 is positioned on EBI data line 0 (AT91C_EBI_NFD0_ON_D16 bit ++ * cleared in CCFG_EBICSA register). ++ * ++ * For Atmel AT91SAM9x5-EK revision B onwards, this AT91C_DDRC2_EBISHARE bit ++ * is cleared because the NAND flash data line 0 is positioned on EBI ++ * data line number 16 (AT91C_EBI_NFD0_ON_D16 bit set in CCFG_EBICSA ++ * register). Only the DDR controller function is thus used on lower ++ * EBI data lines. ++ */ ++ //ddramc_config->cr |= AT91C_DDRC2_EBISHARE; /* DQM is shared with other controller */ ++ ++ ++ /* ++ * The DDR2-SDRAM device requires a refresh every 15.625 us or 7.81 us. ++ * With a 133 MHz frequency, the refresh timer count register must to be ++ * set with (15.625 x 133 MHz) ~ 2084 i.e. 0x824 ++ * or (7.81 x 133 MHz) ~ 1040 i.e. 0x410. ++ */ ++ ddramc_config->rtr = 0x411; /* Refresh timer: 7.8125us */ ++ ++ /* One clock cycle @ 133 MHz = 7.5 ns */ ++ ddramc_config->t0pr = (AT91C_DDRC2_TRAS_(6) /* 6 * 7.5 = 45 ns */ ++ | AT91C_DDRC2_TRCD_(2) /* 2 * 7.5 = 22.5 ns */ ++ | AT91C_DDRC2_TWR_(2) /* 2 * 7.5 = 15 ns */ ++ | AT91C_DDRC2_TRC_(8) /* 8 * 7.5 = 75 ns */ ++ | AT91C_DDRC2_TRP_(2) /* 2 * 7.5 = 15 ns */ ++ | AT91C_DDRC2_TRRD_(2) /* 2 * 7.5 = 15 ns */ ++ | AT91C_DDRC2_TWTR_(2) /* 2 clock cycles min */ ++ | AT91C_DDRC2_TMRD_(2)); /* 2 clock cycles */ ++ ++ ddramc_config->t1pr = (AT91C_DDRC2_TXP_(2) /* 2 clock cycles */ ++ | AT91C_DDRC2_TXSRD_(200) /* 200 clock cycles */ ++ | AT91C_DDRC2_TXSNR_(19) /* 19 * 7.5 = 142.5 ns*/ ++ | AT91C_DDRC2_TRFC_(18)); /* 18 * 7.5 = 135 ns */ ++ ++ ddramc_config->t2pr = (AT91C_DDRC2_TFAW_(7) /* 7 * 7.5 = 52.5 ns */ ++ | AT91C_DDRC2_TRTP_(2) /* 2 clock cycles min */ ++ | AT91C_DDRC2_TRPA_(3) /* 3 * 7.5 = 22.5 ns */ ++ | AT91C_DDRC2_TXARDS_(7) /* 7 clock cycles */ ++ | AT91C_DDRC2_TXARD_(2)); /* 2 clock cycles */ ++} ++ ++static void ddramc_init(void) ++{ ++ unsigned long csa; ++ struct ddramc_register ddramc_reg; ++ ++ ddramc_reg_config(&ddramc_reg); ++ ++ /* ENABLE DDR2 clock */ ++ pmc_enable_system_clock(AT91C_PMC_DDR); ++ ++ /* Chip select 1 is for DDR2/SDRAM */ ++ csa = readl(AT91C_BASE_CCFG + CCFG_EBICSA); ++ csa |= AT91C_EBI_CS1A_SDRAMC; ++ csa &= ~AT91C_EBI_DBPUC; ++ csa |= AT91C_EBI_DBPDC; ++ csa |= AT91C_EBI_DRV_HD; ++ ++ writel(csa, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* DDRAM2 Controller initialize */ ++ ddram_initialize(AT91C_BASE_DDRSDRC, AT91C_BASE_CS1, &ddramc_reg); ++} ++#endif /* #ifdef CONFIG_DDR2 */ ++ ++static void one_wire_hw_init(void) ++{ ++ const struct pio_desc wire_pio[] = { ++ {"1-Wire", AT91C_PIN_PB(18), 1, PIO_DEFAULT, PIO_OUTPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ pmc_enable_periph_clock(AT91C_ID_PIOA_B); ++ pio_configure(wire_pio); ++} ++ ++#ifdef CONFIG_HW_INIT ++void hw_init(void) ++{ ++ /* Disable watchdog */ ++ at91_disable_wdt(); ++ ++ /* ++ * At this stage the main oscillator is ++ * supposed to be enabled PCK = MCK = MOSC ++ */ ++ pmc_init_pll(0); ++ ++ /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ ++ pmc_cfg_plla(PLLA_SETTINGS); ++ ++ /* Switch PCK/MCK on Main clock output */ ++ pmc_cfg_mck(BOARD_PRESCALER_MAIN_CLOCK); ++ ++ /* Switch PCK/MCK on PLLA output */ ++ pmc_cfg_mck(BOARD_PRESCALER_PLLA); ++ ++ /* Enable External Reset */ ++ writel(AT91C_RSTC_KEY_UNLOCK | AT91C_RSTC_URSTEN, AT91C_BASE_RSTC + RSTC_RMR); ++ ++ /* Init timer */ ++ timer_init(); ++ ++ /* Initialize dbgu */ ++ initialize_dbgu(); ++ ++#ifdef CONFIG_DDR2 ++ /* Initialize DDRAM Controller */ ++ ddramc_init(); ++#endif ++ /* one wire pin init */ ++ one_wire_hw_init(); ++} ++#endif /* #ifdef CONFIG_HW_INIT */ ++ ++#ifdef CONFIG_DATAFLASH ++void at91_spi0_hw_init(void) ++{ ++ /* Configure PINs for SPI0 */ ++ const struct pio_desc spi0_pins[] = { ++ {"MISO", AT91C_PIN_PA(11), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"MOSI", AT91C_PIN_PA(12), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"SPCK", AT91C_PIN_PA(13), 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ {"NPCS", CONFIG_SYS_SPI_PCS, 1, PIO_DEFAULT, PIO_OUTPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ pmc_enable_periph_clock(AT91C_ID_PIOA_B); ++ pio_configure(spi0_pins); ++ ++ pmc_enable_periph_clock(AT91C_ID_SPI0); ++} ++#endif /* #ifdef CONFIG_DATAFLASH */ ++ ++#ifdef CONFIG_SDCARD ++#ifdef CONFIG_OF_LIBFDT ++void at91_board_set_dtb_name(char *of_name) ++{ ++ unsigned int cpu_board_id = get_cm_sn(); ++ unsigned int disp_board_id = get_dm_sn(); ++ ++ if (cpu_board_id == BOARD_ID_SAM9G15_CM) ++ strcpy(of_name, "at91sam9g15ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9G25_CM) ++ strcpy(of_name, "at91sam9g25ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9G35_CM) ++ strcpy(of_name, "at91sam9g35ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9X25_CM) ++ strcpy(of_name, "at91sam9x25ek"); ++ else if (cpu_board_id == BOARD_ID_SAM9X35_CM) ++ strcpy(of_name, "at91sam9x35ek"); ++ else ++ dbg_info("WARNING: Not correct CPU board ID\n"); ++ ++ if (disp_board_id == BOARD_ID_PDA_DM) ++ strcat(of_name, "_pda"); ++ ++ strcat(of_name, ".dtb"); ++} ++#endif ++ ++void at91_mci0_hw_init(void) ++{ ++ const struct pio_desc mci_pins[] = { ++ {"MCCK", AT91C_PIN_PA(17), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCCDA", AT91C_PIN_PA(16), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA0", AT91C_PIN_PA(15), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA1", AT91C_PIN_PA(18), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA2", AT91C_PIN_PA(19), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"MCDA3", AT91C_PIN_PA(20), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ /* Configure the PIO controller */ ++ pmc_enable_periph_clock(AT91C_ID_PIOA_B); ++ pio_configure(mci_pins); ++ ++ /* Enable the clock */ ++ pmc_enable_periph_clock(AT91C_ID_HSMCI0); ++} ++#endif /* #ifdef CONFIG_SDCARD */ ++ ++#ifdef CONFIG_NANDFLASH ++void nandflash_hw_init(void) ++{ ++ unsigned int reg; ++ ++ /* Configure Nand PINs */ ++ const struct pio_desc nand_pins_hi[] = { ++ {"NANDOE", CONFIG_SYS_NAND_OE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDWE", CONFIG_SYS_NAND_WE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDALE", CONFIG_SYS_NAND_ALE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCLE", CONFIG_SYS_NAND_CLE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCS", CONFIG_SYS_NAND_ENABLE_PIN, 1, PIO_PULLUP, PIO_OUTPUT}, ++ {"D0", AT91C_PIN_PD(6), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D1", AT91C_PIN_PD(7), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D2", AT91C_PIN_PD(8), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D3", AT91C_PIN_PD(9), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D4", AT91C_PIN_PD(10), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D5", AT91C_PIN_PD(11), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D6", AT91C_PIN_PD(12), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"D7", AT91C_PIN_PD(13), 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ const struct pio_desc nand_pins_lo[] = { ++ {"NANDOE", CONFIG_SYS_NAND_OE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDWE", CONFIG_SYS_NAND_WE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDALE", CONFIG_SYS_NAND_ALE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCLE", CONFIG_SYS_NAND_CLE_PIN, 0, PIO_PULLUP, PIO_PERIPH_A}, ++ {"NANDCS", CONFIG_SYS_NAND_ENABLE_PIN, 1, PIO_PULLUP, PIO_OUTPUT}, ++ {(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A}, ++ }; ++ ++ reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA); ++ reg |= AT91C_EBI_CS3A_SM; ++ if (get_cm_rev() == 'A') ++ reg &= ~AT91C_EBI_NFD0_ON_D16; ++ else ++ reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16); ++ ++ reg &= ~AT91C_EBI_DRV; ++ writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA); ++ ++ /* Configure SMC CS3 */ ++ writel((AT91C_SMC_NWESETUP_(1) ++ | AT91C_SMC_NCS_WRSETUP_(0) ++ | AT91C_SMC_NRDSETUP_(2) ++ | AT91C_SMC_NCS_RDSETUP_(0)), ++ AT91C_BASE_SMC + SMC_SETUP3); ++ ++ writel((AT91C_SMC_NWEPULSE_(3) ++ | AT91C_SMC_NCS_WRPULSE_(5) ++ | AT91C_SMC_NRDPULSE_(4) ++ | AT91C_SMC_NCS_RDPULSE_(6)), ++ AT91C_BASE_SMC + SMC_PULSE3); ++ ++ writel((AT91C_SMC_NWECYCLE_(5) ++ | AT91C_SMC_NRDCYCLE_(7)), ++ AT91C_BASE_SMC + SMC_CYCLE3); ++ ++ writel((AT91C_SMC_READMODE ++ | AT91C_SMC_WRITEMODE ++ | AT91C_SMC_NWAITM_NWAIT_DISABLE ++ | AT91C_SMC_DBW_WIDTH_BITS_8 ++ | AT91_SMC_TDF_(1)), ++ AT91C_BASE_SMC + SMC_CTRL3); ++ ++ /* Configure the PIO controller */ ++ if (get_cm_rev() == 'A') ++ pio_configure(nand_pins_lo); ++ else ++ pio_configure(nand_pins_hi); ++ ++ pmc_enable_periph_clock(AT91C_ID_PIOC_D); ++} ++#endif /* #ifdef CONFIG_NANDFLASH */ diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91sam9x5_4bit_pmecc_header.bin b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91sam9x5_4bit_pmecc_header.bin index f8d6073..f8d6073 100644 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91sam9x5_4bit_pmecc_header.bin +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/at91sam9x5_4bit_pmecc_header.bin diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/create_4bit_pmecc_header.rb b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/create_4bit_pmecc_header.rb index 780d728..780d728 100755 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/create_4bit_pmecc_header.rb +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/create_4bit_pmecc_header.rb diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/defconfig b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/defconfig new file mode 100644 index 0000000..ba0a902 --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/defconfig @@ -0,0 +1,228 @@ +# +# In defiance, this file was edited for +# Multitech systems. +# 2018 Jan 3 18:15CST +# +HAVE_DOT_CONFIG=y +# CONFIG_AT91SAM9260EK is not set +# CONFIG_AT91SAM9261EK is not set +# CONFIG_AT91SAM9263EK is not set +# CONFIG_AT91SAM9RLEK is not set +# CONFIG_AT91SAM9XEEK is not set +# CONFIG_AT91SAM9G10EK is not set +# CONFIG_AT91SAM9G20EK is not set +# CONFIG_AT91SAM9M10G45EK is not set +CONFIG_AT91SAM9X5EK=y +# CONFIG_AT91SAM9N12EK is not set +# CONFIG_SAMA5D3XEK is not set +# CONFIG_SAMA5D3_XPLAINED is not set +# CONFIG_SAMA5D3X_CMP is not set +# CONFIG_SAMA5D4EK is not set +# CONFIG_SAMA5D4_XPLAINED is not set +# CONFIG_SAMA5D2_PTC is not set +# CONFIG_SAMA5D2_XPLAINED is not set +# CONFIG_SAMA5D27_SOM1_EK is not set +# CONFIG_VINCO is not set +# CONFIG_AT91SAM9X5_ARIA is not set +# CONFIG_AT91SAM9X5_ARIETTA is not set +# CONFIG_SAMA5D3_ACQUA is not set +# CONFIG_SAMA5D2_ROADRUNNER is not set +# CONFIG_CORE9G25 is not set +# CONFIG_SAMA5D3_LINEA is not set +CONFIG_BOARDNAME="at91sam9x5ek" +AT91SAM9X5=y +CONFIG_MACH_TYPE="3373" +CONFIG_LINK_ADDR="0x300000" +CONFIG_TOP_OF_MEMORY="0x308000" +CONFIG_CRYSTAL_12_000MHZ=y +# CONFIG_CRYSTAL_16_000MHZ is not set +# CONFIG_CRYSTAL_16_36766MHZ is not set +# CONFIG_CRYSTAL_18_432MHZ is not set +# CONFIG_CRYSTAL_24_000MHZ is not set +ALLOW_CRYSTAL_12_000MHZ=y +CONFIG_CRYSTAL="CRYSTAL_12_000MHZ" +# CONFIG_CPU_CLK_166MHZ is not set +# CONFIG_CPU_CLK_180MHZ is not set +# CONFIG_CPU_CLK_200MHZ is not set +# CONFIG_CPU_CLK_240MHZ is not set +# CONFIG_CPU_CLK_266MHZ is not set +# CONFIG_CPU_CLK_332MHZ is not set +# CONFIG_CPU_CLK_348MHZ is not set +# CONFIG_CPU_CLK_396MHZ is not set +CONFIG_CPU_CLK_400MHZ=y +# CONFIG_CPU_CLK_444MHZ is not set +# CONFIG_CPU_CLK_492MHZ is not set +# CONFIG_CPU_CLK_498MHZ is not set +# CONFIG_CPU_CLK_510MHZ is not set +# CONFIG_CPU_CLK_528MHZ is not set +# CONFIG_CPU_CLK_594MHZ is not set +# CONFIG_CPU_CLK_600MHZ is not set +ALLOW_CPU_CLK_400MHZ=y +# DISABLE_CPU_CLK_240MHZ is not set +# CONFIG_BUS_SPEED_83MHZ is not set +# CONFIG_BUS_SPEED_90MHZ is not set +# CONFIG_BUS_SPEED_100MHZ is not set +# CONFIG_BUS_SPEED_116MHZ is not set +# CONFIG_BUS_SPEED_124MHZ is not set +CONFIG_BUS_SPEED_133MHZ=y +# CONFIG_BUS_SPEED_148MHZ is not set +# CONFIG_BUS_SPEED_164MHZ is not set +# CONFIG_BUS_SPEED_166MHZ is not set +# CONFIG_BUS_SPEED_170MHZ is not set +# CONFIG_BUS_SPEED_176MHZ is not set +# CONFIG_BUS_SPEED_200MHZ is not set +SUPPORT_BUS_SPEED_133MHZ=y +# CPU_HAS_TRUSTZONE is not set +# CONFIG_CPU_V7 is not set +# CONFIG_HAS_PMIC_ACT8865 is not set +# CONFIG_SUPPORT_PM is not set +# CONFIG_HAS_ONE_WIRE is not set +# CONFIG_HAS_EEPROM is not set +# CONFIG_HAS_EHT0_PHY is not set +# CONFIG_HAS_EHT1_PHY is not set +# CONFIG_HAS_AUDIO_CODEC is not set +# CONFIG_HAS_HDMI is not set +CORE_ARM926EJS=y +# CORE_CORTEX_A5 is not set +CPU_HAS_SCKC=y +# CPU_HAS_H32MXDIV is not set +CPU_HAS_HSMCI0=y +CPU_HAS_HSMCI1=y +# CPU_HAS_HSMCI2 is not set +# CPU_HAS_MCI0 is not set +# CPU_HAS_MCI1 is not set +# CPU_HAS_SDHC0 is not set +# CPU_HAS_SDHC1 is not set +CPU_HAS_SPI0=y +CPU_HAS_SPI1=y +# CPU_HAS_SPI0_IOSET1 is not set +# CPU_HAS_SPI0_IOSET2 is not set +# CPU_HAS_SPI1_IOSET1 is not set +# CPU_HAS_SPI1_IOSET2 is not set +# CPU_HAS_SPI1_IOSET3 is not set +# CPU_HAS_QSPI0 is not set +# CPU_HAS_QSPI1 is not set +# CPU_HAS_QSPI0_IOSET1 is not set +# CPU_HAS_QSPI0_IOSET2 is not set +# CPU_HAS_QSPI0_IOSET3 is not set +# CPU_HAS_QSPI1_IOSET1 is not set +# CPU_HAS_QSPI1_IOSET2 is not set +# CPU_HAS_QSPI1_IOSET3 is not set +CPU_HAS_PIO3=y +# CPU_HAS_L2CC is not set +CPU_HAS_PMECC=y +CONFIG_HAS_HW_INFO=y +# CONFIG_TWI is not set +# CONFIG_TWI0 is not set +# CONFIG_TWI1 is not set +# CONFIG_TWI2 is not set +# CONFIG_TWI3 is not set +# CONFIG_MACB is not set +# CONFIG_AES is not set +CONFIG_LOAD_HW_INFO=y +CPU_HAS_TWI0=y +CPU_HAS_TWI1=y +CPU_HAS_TWI2=y +# CPU_HAS_TWI3 is not set +# CPU_HAS_AES is not set +# CPU_HAS_PIO4 is not set + +# +# Memory selection +# +# CONFIG_SDRAM is not set +# CONFIG_SDDRC is not set +CONFIG_DDRC=y +ALLOW_DATAFLASH=y +# ALLOW_FLASH is not set +ALLOW_NANDFLASH=y +ALLOW_SDCARD=y +# ALLOW_PSRAM is not set +# ALLOW_SDRAM_16BIT is not set + +# +# RAM Configuration +# +# CONFIG_RAM_32MB is not set +# CONFIG_RAM_64MB is not set +# CONFIG_RAM_128MB is not set +CONFIG_RAM_256MB=y +# CONFIG_RAM_512MB is not set +# CONFIG_LPDDR1 is not set +# CONFIG_LPDDR2 is not set +# CONFIG_LPDDR3 is not set +CONFIG_DDR2=y +# CONFIG_DDR3 is not set +# CONFIG_SAMA5D2_LPDDR2 is not set +# CONFIG_DATAFLASH is not set +# CONFIG_FLASH is not set +CONFIG_NANDFLASH=y +# CONFIG_SDCARD is not set +CONFIG_MEMORY="nandflash" +ALLOW_BOOT_FROM_DATAFLASH_CS0=y + +# +# NAND flash configuration +# +# CONFIG_ENABLE_SW_ECC is not set +CONFIG_USE_PMECC=y +# CONFIG_ON_DIE_ECC is not set + +# +# PMECC Configuration +# +CONFIG_PMECC_AUTO_DETECT=y +# CONFIG_PMECC_CORRECT_BITS_2 is not set +# CONFIG_PMECC_CORRECT_BITS_4 is not set +# CONFIG_PMECC_CORRECT_BITS_8 is not set +# CONFIG_PMECC_CORRECT_BITS_12 is not set +# CONFIG_PMECC_CORRECT_BITS_24 is not set +CONFIG_PMECC_SECTOR_SIZE_512=y +# CONFIG_PMECC_SECTOR_SIZE_1024 is not set +# CONFIG_NANDFLASH_SMALL_BLOCKS is not set +CONFIG_ONFI_DETECT_SUPPORT=y +CONFIG_USE_ON_DIE_ECC_SUPPORT=y +# ALLOW_NANDFLASH_RECOVERY is not set +CONFIG_BOOTSTRAP_MAXSIZE="23000" +CONFIG_PROJECT="nandflash" +CONFIG_LOAD_UBOOT=y +# CONFIG_LOAD_LINUX is not set +# CONFIG_LOAD_ANDROID is not set +# CONFIG_LOAD_1MB is not set +# CONFIG_LOAD_4MB is not set +# CONFIG_LOAD_64KB is not set +CONFIG_IMG_ADDRESS="0x00040000" +CONFIG_JUMP_ADDR="0x2EF00000" + +# +# U-Boot Image Storage Setup +# +CONFIG_IMG_SIZE="0x00080000" +CONFIG_IMAGE_NAME="u-boot.bin" +CONFIG_DEBUG=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_LOUD is not set +CONFIG_DEBUG_VERY_LOUD=y is not set +CONFIG_THUMB=y +# CONFIG_DISABLE_WATCHDOG is not set + +# +# Hardware Initialization Options +# +CONFIG_HW_DISPLAY_BANNER=y +# Indicate ONFI Usage +CONFIG_HW_BANNER="\"\\n\\nAT91Bootstrap \" AT91BOOTSTRAP_VERSION \" (\" COMPILE_TIME \")/MTechONFI\\n\\n\"" +CONFIG_HW_INIT=y +# CONFIG_USER_HW_INIT is not set + +# +# Slow Clock Configuration Options +# +CONFIG_SCLK=y +# CONFIG_SCLK_BYPASS is not set +# CONFIG_BACKUP_MODE is not set + +# +# Board Hardware Information Options +# +# CONFIG_LOAD_ONE_WIRE is not set diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/defconfig.mtr b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/defconfig.mtr new file mode 100644 index 0000000..b79a0ee --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/defconfig.mtr @@ -0,0 +1,228 @@ +# +# In defiance, this file was edited for +# Multitech systems. +# 2018 Jan 3 18:15CST +# +HAVE_DOT_CONFIG=y +# CONFIG_AT91SAM9260EK is not set +# CONFIG_AT91SAM9261EK is not set +# CONFIG_AT91SAM9263EK is not set +# CONFIG_AT91SAM9RLEK is not set +# CONFIG_AT91SAM9XEEK is not set +# CONFIG_AT91SAM9G10EK is not set +# CONFIG_AT91SAM9G20EK is not set +# CONFIG_AT91SAM9M10G45EK is not set +CONFIG_AT91SAM9X5EK=y +# CONFIG_AT91SAM9N12EK is not set +# CONFIG_SAMA5D3XEK is not set +# CONFIG_SAMA5D3_XPLAINED is not set +# CONFIG_SAMA5D3X_CMP is not set +# CONFIG_SAMA5D4EK is not set +# CONFIG_SAMA5D4_XPLAINED is not set +# CONFIG_SAMA5D2_PTC is not set +# CONFIG_SAMA5D2_XPLAINED is not set +# CONFIG_SAMA5D27_SOM1_EK is not set +# CONFIG_VINCO is not set +# CONFIG_AT91SAM9X5_ARIA is not set +# CONFIG_AT91SAM9X5_ARIETTA is not set +# CONFIG_SAMA5D3_ACQUA is not set +# CONFIG_SAMA5D2_ROADRUNNER is not set +# CONFIG_CORE9G25 is not set +# CONFIG_SAMA5D3_LINEA is not set +CONFIG_BOARDNAME="at91sam9x5ek" +AT91SAM9X5=y +CONFIG_MACH_TYPE="3373" +CONFIG_LINK_ADDR="0x300000" +CONFIG_TOP_OF_MEMORY="0x308000" +CONFIG_CRYSTAL_12_000MHZ=y +# CONFIG_CRYSTAL_16_000MHZ is not set +# CONFIG_CRYSTAL_16_36766MHZ is not set +# CONFIG_CRYSTAL_18_432MHZ is not set +# CONFIG_CRYSTAL_24_000MHZ is not set +ALLOW_CRYSTAL_12_000MHZ=y +CONFIG_CRYSTAL="CRYSTAL_12_000MHZ" +# CONFIG_CPU_CLK_166MHZ is not set +# CONFIG_CPU_CLK_180MHZ is not set +# CONFIG_CPU_CLK_200MHZ is not set +# CONFIG_CPU_CLK_240MHZ is not set +# CONFIG_CPU_CLK_266MHZ is not set +# CONFIG_CPU_CLK_332MHZ is not set +# CONFIG_CPU_CLK_348MHZ is not set +# CONFIG_CPU_CLK_396MHZ is not set +CONFIG_CPU_CLK_400MHZ=y +# CONFIG_CPU_CLK_444MHZ is not set +# CONFIG_CPU_CLK_492MHZ is not set +# CONFIG_CPU_CLK_498MHZ is not set +# CONFIG_CPU_CLK_510MHZ is not set +# CONFIG_CPU_CLK_528MHZ is not set +# CONFIG_CPU_CLK_594MHZ is not set +# CONFIG_CPU_CLK_600MHZ is not set +ALLOW_CPU_CLK_400MHZ=y +# DISABLE_CPU_CLK_240MHZ is not set +# CONFIG_BUS_SPEED_83MHZ is not set +# CONFIG_BUS_SPEED_90MHZ is not set +# CONFIG_BUS_SPEED_100MHZ is not set +# CONFIG_BUS_SPEED_116MHZ is not set +# CONFIG_BUS_SPEED_124MHZ is not set +CONFIG_BUS_SPEED_133MHZ=y +# CONFIG_BUS_SPEED_148MHZ is not set +# CONFIG_BUS_SPEED_164MHZ is not set +# CONFIG_BUS_SPEED_166MHZ is not set +# CONFIG_BUS_SPEED_170MHZ is not set +# CONFIG_BUS_SPEED_176MHZ is not set +# CONFIG_BUS_SPEED_200MHZ is not set +SUPPORT_BUS_SPEED_133MHZ=y +# CPU_HAS_TRUSTZONE is not set +# CONFIG_CPU_V7 is not set +# CONFIG_HAS_PMIC_ACT8865 is not set +# CONFIG_SUPPORT_PM is not set +# CONFIG_HAS_ONE_WIRE is not set +# CONFIG_HAS_EEPROM is not set +# CONFIG_HAS_EHT0_PHY is not set +# CONFIG_HAS_EHT1_PHY is not set +# CONFIG_HAS_AUDIO_CODEC is not set +# CONFIG_HAS_HDMI is not set +CORE_ARM926EJS=y +# CORE_CORTEX_A5 is not set +CPU_HAS_SCKC=y +# CPU_HAS_H32MXDIV is not set +CPU_HAS_HSMCI0=y +CPU_HAS_HSMCI1=y +# CPU_HAS_HSMCI2 is not set +# CPU_HAS_MCI0 is not set +# CPU_HAS_MCI1 is not set +# CPU_HAS_SDHC0 is not set +# CPU_HAS_SDHC1 is not set +CPU_HAS_SPI0=y +CPU_HAS_SPI1=y +# CPU_HAS_SPI0_IOSET1 is not set +# CPU_HAS_SPI0_IOSET2 is not set +# CPU_HAS_SPI1_IOSET1 is not set +# CPU_HAS_SPI1_IOSET2 is not set +# CPU_HAS_SPI1_IOSET3 is not set +# CPU_HAS_QSPI0 is not set +# CPU_HAS_QSPI1 is not set +# CPU_HAS_QSPI0_IOSET1 is not set +# CPU_HAS_QSPI0_IOSET2 is not set +# CPU_HAS_QSPI0_IOSET3 is not set +# CPU_HAS_QSPI1_IOSET1 is not set +# CPU_HAS_QSPI1_IOSET2 is not set +# CPU_HAS_QSPI1_IOSET3 is not set +CPU_HAS_PIO3=y +# CPU_HAS_L2CC is not set +CPU_HAS_PMECC=y +CONFIG_HAS_HW_INFO=y +# CONFIG_TWI is not set +# CONFIG_TWI0 is not set +# CONFIG_TWI1 is not set +# CONFIG_TWI2 is not set +# CONFIG_TWI3 is not set +# CONFIG_MACB is not set +# CONFIG_AES is not set +CONFIG_LOAD_HW_INFO=y +CPU_HAS_TWI0=y +CPU_HAS_TWI1=y +CPU_HAS_TWI2=y +# CPU_HAS_TWI3 is not set +# CPU_HAS_AES is not set +# CPU_HAS_PIO4 is not set + +# +# Memory selection +# +# CONFIG_SDRAM is not set +# CONFIG_SDDRC is not set +CONFIG_DDRC=y +ALLOW_DATAFLASH=y +# ALLOW_FLASH is not set +ALLOW_NANDFLASH=y +ALLOW_SDCARD=y +# ALLOW_PSRAM is not set +# ALLOW_SDRAM_16BIT is not set + +# +# RAM Configuration +# +# CONFIG_RAM_32MB is not set +# CONFIG_RAM_64MB is not set +CONFIG_RAM_128MB=y +# CONFIG_RAM_256MB is not set +# CONFIG_RAM_512MB is not set +# CONFIG_LPDDR1 is not set +# CONFIG_LPDDR2 is not set +# CONFIG_LPDDR3 is not set +CONFIG_DDR2=y +# CONFIG_DDR3 is not set +# CONFIG_SAMA5D2_LPDDR2 is not set +# CONFIG_DATAFLASH is not set +# CONFIG_FLASH is not set +CONFIG_NANDFLASH=y +# CONFIG_SDCARD is not set +CONFIG_MEMORY="nandflash" +ALLOW_BOOT_FROM_DATAFLASH_CS0=y + +# +# NAND flash configuration +# +# CONFIG_ENABLE_SW_ECC is not set +CONFIG_USE_PMECC=y +# CONFIG_ON_DIE_ECC is not set + +# +# PMECC Configuration +# +CONFIG_PMECC_AUTO_DETECT=y +# CONFIG_PMECC_CORRECT_BITS_2 is not set +# CONFIG_PMECC_CORRECT_BITS_4 is not set +# CONFIG_PMECC_CORRECT_BITS_8 is not set +# CONFIG_PMECC_CORRECT_BITS_12 is not set +# CONFIG_PMECC_CORRECT_BITS_24 is not set +CONFIG_PMECC_SECTOR_SIZE_512=y +# CONFIG_PMECC_SECTOR_SIZE_1024 is not set +# CONFIG_NANDFLASH_SMALL_BLOCKS is not set +CONFIG_ONFI_DETECT_SUPPORT=y +CONFIG_USE_ON_DIE_ECC_SUPPORT=y +# ALLOW_NANDFLASH_RECOVERY is not set +CONFIG_BOOTSTRAP_MAXSIZE="23000" +CONFIG_PROJECT="nandflash" +CONFIG_LOAD_UBOOT=y +# CONFIG_LOAD_LINUX is not set +# CONFIG_LOAD_ANDROID is not set +# CONFIG_LOAD_1MB is not set +# CONFIG_LOAD_4MB is not set +# CONFIG_LOAD_64KB is not set +CONFIG_IMG_ADDRESS="0x00040000" +CONFIG_JUMP_ADDR="0x26F00000" + +# +# U-Boot Image Storage Setup +# +CONFIG_IMG_SIZE="0x00080000" +CONFIG_IMAGE_NAME="u-boot.bin" +CONFIG_DEBUG=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_LOUD is not set +CONFIG_DEBUG_VERY_LOUD=y is not set +CONFIG_THUMB=y +# CONFIG_DISABLE_WATCHDOG is not set + +# +# Hardware Initialization Options +# +CONFIG_HW_DISPLAY_BANNER=y +# Indicate ONFI Usage +CONFIG_HW_BANNER="\"\\n\\nAT91Bootstrap \" AT91BOOTSTRAP_VERSION \" (\" COMPILE_TIME \")/MTechONFI\\n\\n\"" +CONFIG_HW_INIT=y +# CONFIG_USER_HW_INIT is not set + +# +# Slow Clock Configuration Options +# +CONFIG_SCLK=y +# CONFIG_SCLK_BYPASS is not set +# CONFIG_BACKUP_MODE is not set + +# +# Board Hardware Information Options +# +# CONFIG_LOAD_ONE_WIRE is not set diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/disable-rtc-interrupts.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/disable-rtc-interrupts.patch new file mode 100644 index 0000000..d262972 --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/disable-rtc-interrupts.patch @@ -0,0 +1,32 @@ +diff -Naru orig/board/at91sam9x5ek/at91sam9x5ek.c new/board/at91sam9x5ek/at91sam9x5ek.c +--- orig/board/at91sam9x5ek/at91sam9x5ek.c 2018-01-04 18:06:52.533763774 -0600 ++++ new/board/at91sam9x5ek/at91sam9x5ek.c 2018-01-04 18:32:57.905717432 -0600 +@@ -44,6 +44,18 @@ + #include "at91sam9x5ek.h" + #include "board_hw_info.h" + ++#define RTC_SCCR 0x1C ++#define RTC_IDR 0x24 ++ ++static void at91_disable_rtc(void) ++{ ++ /* disable all RTC interrupts and clear status register. ++ * Prevents possible Linux lockup due to unexpected RTC interrupt ++ */ ++ writel(0xFF, RTC_IDR + AT91C_BASE_RTC); ++ writel(0xFF, RTC_SCCR + AT91C_BASE_RTC); ++} ++ + static void at91_dbgu_hw_init(void) + { + /* Configure DBGU pins */ +@@ -161,6 +173,9 @@ + #ifdef CONFIG_HW_INIT + void hw_init(void) + { ++ /* 1st chance to disable RTC */ ++ at91_disable_rtc(); ++ + /* Disable watchdog */ + at91_disable_wdt(); + diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/mtrv1-DDRlowDriveStrength.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/mtrv1-DDRlowDriveStrength.patch new file mode 100644 index 0000000..e57ba89 --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/mtrv1-DDRlowDriveStrength.patch @@ -0,0 +1,22 @@ +diff -Naru at91bootstrap-3.8.12.orig/board/at91sam9x5ek/at91sam9x5ek.c at91bootstrap-3.8.12/board/at91sam9x5ek/at91sam9x5ek.c +--- at91bootstrap-3.8.12.orig/board/at91sam9x5ek/at91sam9x5ek.c 2019-03-19 16:57:01.976164610 -0500 ++++ at91bootstrap-3.8.12/board/at91sam9x5ek/at91sam9x5ek.c 2019-03-19 16:58:01.688162842 -0500 +@@ -75,6 +75,7 @@ + | AT91C_DDRC2_CAS_3 /* CAS Latency 3 */ + | AT91C_DDRC2_NB_BANKS_8 /* 8 banks */ + | AT91C_DDRC2_DISABLE_RESET_DLL ++ | AT91C_DDRC2_DIC_DS /* Low DDR Drive Strength */ + | AT91C_DDRC2_DECOD_INTERLEAVED);/*Interleaved decode*/ + + /* +diff -Naru at91bootstrap-3.8.12.orig/driver/common.c at91bootstrap-3.8.12/driver/common.c +--- at91bootstrap-3.8.12.orig/driver/common.c 2019-03-19 16:46:52.532182652 -0500 ++++ at91bootstrap-3.8.12/driver/common.c 2019-03-19 16:48:42.144179407 -0500 +@@ -143,6 +143,7 @@ + usart_puts(media); + + if (retval == 0) { ++ usart_puts("DDR Drive Strength: low\n"); + #if defined(CONFIG_LOAD_NONE) + usart_puts("AT91Bootstrap completed. Can load application via JTAG and jump.\n"); + #else diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.2-onetime-slow-clock-switch.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/onetime-slow-clock-switch.patch index 98ccd41..ebd007f 100644 --- a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.2-onetime-slow-clock-switch.patch +++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.8.12/onetime-slow-clock-switch.patch @@ -1,20 +1,17 @@ -Index: at91bootstrap-3.5.2/driver/at91_slowclk.c -=================================================================== ---- at91bootstrap-3.5.2.orig/driver/at91_slowclk.c 2013-01-30 04:01:20.000000000 -0600 -+++ at91bootstrap-3.5.2/driver/at91_slowclk.c 2013-04-24 11:35:44.369827054 -0500 -@@ -33,12 +33,17 @@ - { +diff -Naru orig/driver/at91_slowclk.c new/driver/at91_slowclk.c +--- orig/driver/at91_slowclk.c 2019-03-18 16:56:37.362723190 -0500 ++++ new/driver/at91_slowclk.c 2019-03-18 17:06:16.138706056 -0500 +@@ -35,12 +35,15 @@ + #if !defined(SAMA5D4) && !defined(SAMA5D2) unsigned int reg; - /* - * Enable the 32768 Hz oscillator by setting the bit OSC32EN to 1 - */ -+ reg = readl(AT91C_BASE_SCKCR); - reg |= AT91C_SLCKSEL_OSC32EN; - writel(reg, AT91C_BASE_SCKCR); -+ -+ /* Only enable 32768 Hz oscillator if needed */ ++ /* Only enable 32768 Hz oscillator if needed */ + if ( !(reg & AT91C_SLCKSEL_OSC32EN) ) { + /* + * Enable the 32768 Hz oscillator by setting the bit OSC32EN to 1 @@ -22,44 +19,50 @@ Index: at91bootstrap-3.5.2/driver/at91_slowclk.c + reg |= AT91C_SLCKSEL_OSC32EN; + writel(reg, AT91C_BASE_SCKCR); + } + #endif /* #if !defined(SAMA5D4) && !defined(SAMA5D2) */ /* start a internal timer */ - start_interval_timer(); -@@ -50,32 +55,40 @@ +@@ -67,12 +70,15 @@ { unsigned int reg; - /* -- * Wait 32768 Hz Startup Time for clock stabilization (software loop) -- * wait about 1s (1000ms) -- */ -- wait_interval_timer(1000); -- -- /* -- * Switching from internal 32kHz RC oscillator to 32768 Hz oscillator -- * by setting the bit OSCSEL to 1 +- * Disable the 32kHz RC oscillator by setting the bit RCEN to 0 - */ ++ /* Only disable internal RC oscillator if needed */ reg = readl(AT91C_BASE_SCKCR); -- reg |= AT91C_SLCKSEL_OSCSEL; +- reg &= ~AT91C_SLCKSEL_RCEN; - writel(reg, AT91C_BASE_SCKCR); ++ if (reg | AT91C_SLCKSEL_RCEN) { ++ /* ++ * Disable the 32kHz RC oscillator by setting the bit RCEN to 0 ++ */ ++ reg &= ~AT91C_SLCKSEL_RCEN; ++ writel(reg, AT91C_BASE_SCKCR); ++ } + } + #endif /* #if !defined(SAMA5D4) && !defined(SAMA5D2) */ + +@@ -90,22 +96,32 @@ + if (reg & AT91C_SLCKSEL_OSCSEL) + return 0; +- reg |= AT91C_SLCKSEL_OSCSEL; +- writel(reg, AT91C_BASE_SCKCR); +- - /* - * Waiting 5 slow clock cycles for internal resynchronization - * 5 slow clock cycles = ~153 us (5 / 32768) - */ - udelay(153); - -- /* -- * Disable the 32kHz RC oscillator by setting the bit RCEN to 0 -- */ -+ /* Only switch clock source if needed */ -+ if ( !(reg & AT91C_SLCKSEL_OSCSEL) ) { -+ dbgu_print("Switching slow clock to external oscillator...\n\r"); ++ if ( !(reg & AT91C_SLCKSEL_OSCSEL) ) { ++ dbg_printf("Switching slow clock to external oscillator...\n"); + /* + * Wait 32768 Hz Startup Time for clock stabilization (software loop) -+ * wait about 1s (1000ms) ++ * wait about ~1s (1300ms) + */ -+ wait_interval_timer(1000); ++ slowclk_wait_osc32_stable(); + + /* + * Switching from internal 32kHz RC oscillator to 32768 Hz oscillator @@ -74,18 +77,13 @@ Index: at91bootstrap-3.5.2/driver/at91_slowclk.c + */ + udelay(153); + } -+ -+ /* Only disable internal RC oscillator if needed */ - reg = readl(AT91C_BASE_SCKCR); -- reg &= ~AT91C_SLCKSEL_RCEN; -- writel(reg, AT91C_BASE_SCKCR); -+ if (reg | AT91C_SLCKSEL_RCEN) { -+ /* -+ * Disable the 32kHz RC oscillator by setting the bit RCEN to 0 -+ */ -+ reg &= ~AT91C_SLCKSEL_RCEN; -+ writel(reg, AT91C_BASE_SCKCR); -+ } - return 0; } + + int slowclk_switch_osc32(void) + { +- slowclk_wait_osc32_stable(); +- + slowclk_select_osc32(); + + #if !defined(SAMA5D4) && !defined(SAMA5D2) diff --git a/recipes-bsp/at91bootstrap/at91bootstrap.inc b/recipes-bsp/at91bootstrap/at91bootstrap.inc new file mode 100644 index 0000000..599713e --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap.inc @@ -0,0 +1,122 @@ +SUMMARY = "Initial bootstrap for AT91 ARM MPUs" +DESCRIPTION = " \ + at91bootstrap is the second-level bootloader for Atmel AT91 \ + SoCs. It provides a set of algorithms to manage the hardware \ + initialization and to download the main application (or a \ + third-level bootloader) from specified boot media to \ + main memory and start it. \ + " +AUTHOR = "Atmel Corporation" +HOMEPAGE = "http://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap" +BUGTRACKER = "https://github.com/linux4sam/at91bootstrap/issues" +SECTION = "bootloaders" +LICENSE = "ATMEL" +LIC_FILES_CHKSUM = "file://main.c;endline=27;md5=42f86d2f6fd17d1221c5c651b487a07f" + + +inherit cml1 deploy + +SRC_URI_append = " \ + file://defconfig \ + file://onetime-slow-clock-switch.patch \ + file://disable-rtc-interrupts.patch \ + file://at91sam9x5_4bit_pmecc_header.bin \ +" +SRC_URI_append_mtrv1 = " file://mtrv1-DDRlowDriveStrength.patch \ + file://defconfig.mtr \ + file://at91bootstrap-3.8-mtr.patch \ +" +SRC_URI_append_mtr = " file://defconfig.mtr \ + file://at91bootstrap-3.8-mtr.patch \ +" + +SRC_URI_append_mtcdt = " file://at91bootstrap-3.8-mtcdt.patch " +SRC_URI_append_mtcap = " file://at91bootstrap-3.8-mtcdt.patch " + +AT91BOOTSTRAP_MACHINE ??= "${MACHINE}" + +AT91BOOTSTRAP_CONFIG ??= "${AT91BOOTSTRAP_MACHINE}nf_uboot" +AT91BOOTSTRAP_CONFIG_at91sam9x5ek-sd ??= "${AT91BOOTSTRAP_MACHINE}sd_uboot" +AT91BOOTSTRAP_CONFIG_sama5d3-xplained-sd ??= "${AT91BOOTSTRAP_MACHINE}sd_uboot" +AT91BOOTSTRAP_CONFIG_sama5d4ek ??= "${AT91BOOTSTRAP_MACHINE}nf_uboot_secure" +AT91BOOTSTRAP_CONFIG_sama5d4-xplained ??= "${AT91BOOTSTRAP_MACHINE}nf_uboot_secure" +AT91BOOTSTRAP_CONFIG_sama5d4-xplained-sd ??= "${AT91BOOTSTRAP_MACHINE}sd_uboot_secure" +AT91BOOTSTRAP_CONFIG_sama5d2-xplained ??= "${AT91BOOTSTRAP_MACHINE}-bsrdf_uboot" +AT91BOOTSTRAP_CONFIG_sama5d2-xplained-sd ??= "${AT91BOOTSTRAP_MACHINE}-bsrsd_uboot" +AT91BOOTSTRAP_CONFIG_sama5d27-som1-ek ??= "${AT91BOOTSTRAP_MACHINE}qspi_uboot" +AT91BOOTSTRAP_CONFIG_sama5d27-som1-ek-sd ??= "${AT91BOOTSTRAP_MACHINE}sd_uboot" + +AT91BOOTSTRAP_TARGET ??= "${AT91BOOTSTRAP_CONFIG}_defconfig" +AT91BOOTSTRAP_LOAD ??= "nandflashboot-uboot" +AT91BOOTSTRAP_LOAD_at91sam9x5ek-sd ??= "sdboot-uboot" +AT91BOOTSTRAP_LOAD_sama5d2-xplained ??= "dataflashboot-uboot" +AT91BOOTSTRAP_LOAD_sama5d2-xplained-sd ??= "sdboot-uboot" +AT91BOOTSTRAP_LOAD_sama5d27-som1-ek ??= "qspiboot-uboot" +AT91BOOTSTRAP_LOAD_sama5d27-som1-ek-sd ??= "sdboot-uboot" +AT91BOOTSTRAP_LOAD_sama5d3-xplained-sd ??= "sdboot-uboot" +AT91BOOTSTRAP_LOAD_sama5d4-xplained-sd ??= "sdboot-uboot" + +AT91BOOTSTRAP_SUFFIX ?= "bin" +AT91BOOTSTRAP_IMAGE ?= "${AT91BOOTSTRAP_MACHINE}-${AT91BOOTSTRAP_LOAD}-${PV}.${PR}.${AT91BOOTSTRAP_SUFFIX}" +AT91BOOTSTRAP_BINARY ?= "at91bootstrap.${AT91BOOTSTRAP_SUFFIX}" +AT91BOOTSTRAP_SYMLINK ?= "at91bootstrap-${AT91BOOTSTRAP_MACHINE}.${AT91BOOTSTRAP_SUFFIX}" + +EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} REVISION=${PR} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"' + +do_configure() { + # Copy board defconfig to .config if .config does not exist. This + # allows recipes to manage the .config themselves in + # do_configure_prepend(). + if [ -f "${S}/board/${AT91BOOTSTRAP_MACHINE}/${AT91BOOTSTRAP_TARGET}" ] && [ ! -f "${B}/.config" ]; then + cp "${S}/board/${AT91BOOTSTRAP_MACHINE}/${AT91BOOTSTRAP_TARGET}" "${B}/.config" + fi + + # Copy defconfig to .config if .config does not exist. This allows + # recipes to manage the .config themselves in do_configure_prepend() + # and to override default settings with a custom file. + if [[ ${MACHINE} == mtr ]] || [[ ${MACHINE} == mtrv1 ]] ; then + CTYPE=".mtr" + fi + + if [ -f "${WORKDIR}/defconfig${CTYPE}" ] && [ ! -f "${B}/.config" ]; then + cp "${WORKDIR}/defconfig${CTYPE}" "${B}/.config" + fi + + if [ ! -f "${S}/.config" ]; then + bbfatal "No config files found" + fi + + cml1_do_configure +} + +do_compile() { + if [ "${@bb.utils.contains('DISTRO_FEATURES', 'ld-is-gold', 'ld-is-gold', '', d)}" = "ld-is-gold" ] ; then + sed -i 's/$(CROSS_COMPILE)ld$/$(CROSS_COMPILE)ld.bfd/g' ${S}/Makefile + fi + + unset CFLAGS CPPFLAGS LDFLAGS + oe_runmake +} + +do_deploy () { + install -d ${DEPLOYDIR} + install ${S}/binaries/${AT91BOOTSTRAP_BINARY} ${DEPLOYDIR}/${AT91BOOTSTRAP_IMAGE} + + cd ${DEPLOYDIR} + rm -f ${AT91BOOTSTRAP_BINARY} ${AT91BOOTSTRAP_SYMLINK} + ln -sf ${AT91BOOTSTRAP_IMAGE} ${AT91BOOTSTRAP_SYMLINK} + ln -sf ${AT91BOOTSTRAP_IMAGE} ${AT91BOOTSTRAP_BINARY} + + # Create a symlink ready for file copy on SD card + rm -f boot.bin BOOT.BIN + ln -sf ${AT91BOOTSTRAP_IMAGE} BOOT.BIN + + # Create padded version. Padded version is to be eliminated later. + cp -f ${WORKDIR}/at91sam9x5_4bit_pmecc_header.bin ${DEPLOYDIR}/at91bootstrap_pmecc_padded.bin + cat ${DEPLOYDIR}/${AT91BOOTSTRAP_IMAGE} >> ${DEPLOYDIR}/at91bootstrap_pmecc_padded.bin +} + +addtask deploy before do_build after do_compile + +PACKAGE_ARCH = "${MACHINE_ARCH}" + diff --git a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb b/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb deleted file mode 100644 index 04ff0db..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb +++ /dev/null @@ -1,34 +0,0 @@ -require at91bootstrap_3.5.inc - -PR = "r5" - -LICENSE = "custom-freely-distributable" -LIC_FILES_CHKSUM = "file://main.c;beginline=6;endline=26;md5=6fca71334c9e8b7d033296123c91437f" - -SRCREV = "v${PV}" -SRC_URI = "git://github.com/linux4sam/at91bootstrap \ - file://at91bootstrap-3.5.2-add-install.patch \ - file://at91bootstrap-3.5.2-onetime-slow-clock-switch.patch \ - file://at91sam9x5_4bit_pmecc_header.bin \ - file://at91bootstrap-3.5.3-disable-rtc-interrupts.patch" - -S = "${WORKDIR}/git" - -SRC_URI_append_mtcdt = " file://at91bootstrap-3.5.3-mtcdt.patch " -SRC_URI_append_mtcap = " file://at91bootstrap-3.5.3-mtcdt.patch " -SRC_URI_append_mtr = " file://at91bootstrap-3.5.3-mtr.patch" -SRC_URI_append_mtrv1 = " file://at91bootstrap-3.5.3-mtr.patch \ - file://at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch \ -" - -# generate a bootstrap file padded with the header needed for 4-bit PMECC -# The padded file can be flashed via u-boot without any need to set the PMECC header using SAM-BA -do_pad_4bit_pmecc() { - cp -f ${WORKDIR}/at91sam9x5_4bit_pmecc_header.bin ${DEPLOY_DIR_IMAGE}/at91bootstrap_pmecc_padded.bin - cat ${DEPLOY_DIR_IMAGE}/at91bootstrap.bin >> ${DEPLOY_DIR_IMAGE}/at91bootstrap_pmecc_padded.bin -} - -do_install_append() { - do_pad_4bit_pmecc -} - diff --git a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb.orig b/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb.orig deleted file mode 100644 index c6ae7a7..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb.orig +++ /dev/null @@ -1,31 +0,0 @@ -require at91bootstrap_3.5.inc - -PR = "r2" - -LICENSE = "custom-freely-distributable" -LIC_FILES_CHKSUM = "file://main.c;beginline=6;endline=26;md5=6fca71334c9e8b7d033296123c91437f" - -SRCREV = "v${PV}" -SRC_URI = "git://github.com/linux4sam/at91bootstrap \ - file://at91bootstrap-3.5.2-add-install.patch \ - file://at91bootstrap-3.5.2-onetime-slow-clock-switch.patch \ - file://at91sam9x5_4bit_pmecc_header.bin \ - file://at91bootstrap-3.5.3-remove-std-includes.patch \ - " - -S = "${WORKDIR}/git" - -SRC_URI_append_mtcdt = " file://at91bootstrap-3.5.3-mtcdt.patch " -SRC_URI_append_mtcap = " file://at91bootstrap-3.5.3-mtcdt.patch " - -# generate a bootstrap file padded with the header needed for 4-bit PMECC -# The padded file can be flashed via u-boot without any need to set the PMECC header using SAM-BA -do_pad_4bit_pmecc() { - cp -f ${WORKDIR}/at91sam9x5_4bit_pmecc_header.bin ${DEPLOY_DIR_IMAGE}/at91bootstrap_pmecc_padded.bin - cat ${DEPLOY_DIR_IMAGE}/at91bootstrap.bin >> ${DEPLOY_DIR_IMAGE}/at91bootstrap_pmecc_padded.bin -} - -do_install_append() { - do_pad_4bit_pmecc -} - diff --git a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.inc b/recipes-bsp/at91bootstrap/at91bootstrap_3.5.inc deleted file mode 100644 index 4b3e957..0000000 --- a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.inc +++ /dev/null @@ -1,33 +0,0 @@ -DESCRIPTION = "at91bootstrap: loaded into internal SRAM by AT91 BootROM" -SECTION = "bootloaders" - -PARALLEL_MAKE = "" - -PACKAGE_ARCH = "${MACHINE_ARCH}" -EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX} DESTDIR=${DEPLOY_DIR_IMAGE} REVISION=${PR}" - -do_compile () { - unset LDFLAGS - unset CFLAGS - unset CPPFLAGS - - # For Newer Yocto/Bitbake, CC does not - # include the staging directory - # by default - CC="${CC} --sysroot=${STAGING_DIR_HOST}" - LD="${LD} --sysroot=${STAGING_DIR_HOST}" - - rm -Rf ${S}/binaries - for board in ${AT91BOOTSTRAP_BOARD} ; do - oe_runmake mrproper CC="${CC}" LD="${LD}" - filename=`find board -name ${board}_defconfig` - if ! [ "x$filename" == "x" ] ; then - cp $filename .config - oe_runmake CC="${CC}" LD="${LD}" - oe_runmake install - else - echo "${board} could not be built" - exit 1 - fi - done -} diff --git a/recipes-bsp/at91bootstrap/at91bootstrap_3.8.12.bb b/recipes-bsp/at91bootstrap/at91bootstrap_3.8.12.bb new file mode 100644 index 0000000..99ba701 --- /dev/null +++ b/recipes-bsp/at91bootstrap/at91bootstrap_3.8.12.bb @@ -0,0 +1,10 @@ +require at91bootstrap.inc +PR = "m1" + +LIC_FILES_CHKSUM = "file://main.c;endline=27;md5=a2a70db58191379e2550cbed95449fbd" + +SRC_URI = "https://github.com/linux4sam/at91bootstrap/archive/v${PV}.tar.gz;name=tarball" + +SRC_URI[tarball.md5sum] = "9cdcd5b427a7998315e9a0cad4488ffd" +SRC_URI[tarball.sha256sum] = "871140177e2cab7eeed572556025f9fdc5e82b2bb18302445d13db0f95e21694" + diff --git a/recipes-bsp/at91bootstrap/files/Creating-symlink-to-binary.patch b/recipes-bsp/at91bootstrap/files/Creating-symlink-to-binary.patch new file mode 100644 index 0000000..7103d60 --- /dev/null +++ b/recipes-bsp/at91bootstrap/files/Creating-symlink-to-binary.patch @@ -0,0 +1,30 @@ +From 35f4ab2ed71cd3fc13ccf14525e7de2c27348c61 Mon Sep 17 00:00:00 2001 +From: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com> +Date: Fri, 13 Dec 2013 10:20:03 +0100 +Subject: [PATCH 2/2] Creating symlink to binary + +Since the name of the flashable image is config-dependant, we create a +symlink to this file to have a standard name to the last built flashable +image. + +Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com> +Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> +--- + Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Makefile b/Makefile +index 0b1cae6..11062f0 100644 +--- a/Makefile ++++ b/Makefile +@@ -287,6 +287,7 @@ $(AT91BOOTSTRAP): $(OBJS) + @$(LD) $(LDFLAGS) -n -o $(BINDIR)/$(BOOT_NAME).elf $(OBJS) + # @$(OBJCOPY) --strip-debug --strip-unneeded $(BINDIR)/$(BOOT_NAME).elf -O binary $(BINDIR)/$(BOOT_NAME).bin + @$(OBJCOPY) --strip-all $(BINDIR)/$(BOOT_NAME).elf -O binary $@ ++ @ln -sf $(BOOT_NAME).bin ${BINDIR}/${SYMLINK} + + %.o : %.c .config + @echo " CC "$< +-- +1.8.2.2 + diff --git a/recipes-bsp/at91bootstrap/files/Remove-standard-includes.patch b/recipes-bsp/at91bootstrap/files/Remove-standard-includes.patch new file mode 100644 index 0000000..01fa9d4 --- /dev/null +++ b/recipes-bsp/at91bootstrap/files/Remove-standard-includes.patch @@ -0,0 +1,59 @@ +From b1e85d514d24edf45bbb8a6b647238d00194f369 Mon Sep 17 00:00:00 2001 +From: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com> +Date: Thu, 12 Dec 2013 11:57:27 +0100 +Subject: [PATCH 1/2] Remove standard includes + +These includes are not needed and fail the build when using a custom +built toolchain from OpenEmbedded. + +Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com> +Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> +--- + Makefile | 4 +++- + driver/debug.c | 1 - + driver/flash.c | 2 -- + 3 files changed, 3 insertions(+), 4 deletions(-) + +diff --git a/Makefile b/Makefile +index 03dd9df..0b1cae6 100644 +--- a/Makefile ++++ b/Makefile +@@ -211,7 +211,9 @@ OBJS:= $(SOBJS-y) $(COBJS-y) + INCL=board/$(BOARDNAME) + GC_SECTIONS=--gc-sections + +-CPPFLAGS=-ffunction-sections -g -Os -Wall \ ++NOSTDINC_FLAGS=-nostdinc -isystem $(shell $(CC) -print-file-name=include) ++ ++CPPFLAGS=$(NOSTDINC_FLAGS) -ffunction-sections -g -Os -Wall \ + -fno-stack-protector -fno-common \ + -I$(INCL) -Iinclude -Ifs/include \ + -DAT91BOOTSTRAP_VERSION=\"$(VERSION)$(REV)$(SCMINFO)\" -DCOMPILE_TIME="\"$(DATE)\"" +diff --git a/driver/debug.c b/driver/debug.c +index 9f83e4b..352c34f 100644 +--- a/driver/debug.c ++++ b/driver/debug.c +@@ -27,7 +27,6 @@ + */ + #include "usart.h" + #include "debug.h" +-#include <stdio.h> + #include <stdarg.h> + + #define MAX_BUFFER 128 +diff --git a/driver/flash.c b/driver/flash.c +index 11615c7..ebc5d5a 100644 +--- a/driver/flash.c ++++ b/driver/flash.c +@@ -26,8 +26,6 @@ + #include "../include/part.h" + #include "../include/main.h" + #include "../include/flash.h" +-#include <stdlib.h> +- + + int load_norflash(unsigned int img_addr, + unsigned int img_size, +-- +1.8.2.2 + |