Move MTC written code into .net (eventually).

3 files changed, 241 insertions, 0 deletions

diff --git a/recipes-kernel/rs9113/files/rs9113/rs9113.default b/recipes-kernel/rs9113/files/rs9113/rs9113.default
new file mode 100644
index 0000000..9d474bc
--- /dev/null
+++ b/recipes-kernel/rs9113/files/rs9113/rs9113.default
@@ -0,0 +1,53 @@
+# Parameters for rs9113 driver
+#
+# Enable Antenna Diversity (1)
+RSI_ANTENNA_DIVERSITY=0
+
+# COEX_MODE options:
+#		1    WLAN STATION /WIFI-Direct/WLAN PER
+#		2    WLAN ACCESS POINT(including muliple APs on different vaps)
+#		3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
+#		4    BT CLASSIC MODE/BT CLASSIC PER MODE
+#		5    WLAN STATION + BT CLASSIC MODE
+#		6    WLAN ACCESS POINT + BT CLASSIC MODE
+#		8    BT LE MODE /BT LE PER MODE
+#		9    WLAN STATION + BT LE MODE
+#		12   BT CLASSIC + BT LE MODE 							
+#		14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
+COEX_MODE=6
+
+# Power selection
+#	0x00 - For Both TX and RX High Power
+#	0x11 - For Both TX and RX Medium Power
+#	0x22 - For Both TX and RX LOW Power
+#	0x10 - For High Power TX and Medium RX Power
+#	0x20 - For High Power TX and LOW RX Power
+#	0x01 - For Medium TX and RX High Power
+#	0x21 - For Medium Power TX and LOW RX Power
+#	0x02 - For Low Power TX and RX High Power
+#	0x12 - For LOW Power TX and Medium RX Power
+WLAN_RF_PWR_MODE=0x00
+BT_RF_PWR_MODE=0x00
+
+#Power_mode type
+# 0 - HIGH  POWER MODE
+# 1 - MEDIUM POWER MODE 
+# 2 - LOW POWER MODE
+BT_RF_TX_POWER_MODE=0
+BT_RF_RX_POWER_MODE=0
+
+# Country Selection
+# 0 World Domain
+# 840 US Domain Maps to US Region
+# 276 Germany Maps to EU Region
+# 392 Japan Maps to Japan Region
+# from ISO 3166-1
+SET_COUNTRY_CODE=0
+
+#	2 – Select internal antenna
+#	3 – Select external antenna
+ANT_SEL_VAL=2
+
+ONBOARD_ANT_SEL=1
+SET_RETRY_COUNT=15
+
diff --git a/recipes-kernel/rs9113/files/rs9113/rs9113.init b/recipes-kernel/rs9113/files/rs9113/rs9113.init
new file mode 100755
index 0000000..2351ae4
--- /dev/null
+++ b/recipes-kernel/rs9113/files/rs9113/rs9113.init
@@ -0,0 +1,93 @@
+#!/bin/bash
+# Note that none of the INIT stuff below works in the current open-embedded.
+### BEGIN INIT INFO
+# Provides: rs9113
+# Required-Start: mts-io
+# Default-Start:  S
+# Default-Stop:   0 6
+# X-Start-Before: networking
+# Short-Description: load the rs9113 drivers
+# Description: rs9113 drivers are used to provide access to Bluetooth
+#	       and WiFi.
+### END INIT INFO
+
+CONFIG=/etc/default/rs9113
+MTS_IODIR=/sys/devices/platform/mts-io
+RS9113_RESET=${MTS_IODIR}/wifi-bt-reset
+RS9113_INT=${MTS_IODIR}/wifi-bt-int
+RS9113_WKUP=${MTS_IODIR}/wifi-bt-lpwkup
+
+[ -f $CONFIG ] || exit 1
+
+. $CONFIG
+
+case "$1" in
+  start)
+    # Reset the RS9113 chip is ready, and
+	# wait for it to settle.
+    if [ -f "$RS9113_RESET" ] ; then
+    	echo 1 >$RS9113_RESET
+	usleep 100
+    	echo 0 >$RS9113_RESET
+	usleep 100
+    	echo 1 >$RS9113_RESET
+	N=1
+	while [ $N -lt 20 ] ; do
+		INT=$(cat $RS9113_INT)
+		WKUP=$(cat $RS9113_WKUP)
+		if [ $INT -ne 1 -o $WKUP -ne 1 ] ; then
+			usleep 100
+		else
+			break
+		fi
+	done
+	if [ $INT -ne 1 ] ; then
+		logger -t rs9113 -p error -s "$RS9113_INT is $INT"
+	fi
+	if [ $WKUP -ne 1 ] ; then
+		logger -t rs9113 -p error -s "$RS9113_WKUP is $WKUP"
+	fi
+    fi
+    /usr/bin/logger -t "rs9113" -p info -s "Loading rs9113 modules with COEX=$COEX_MODE and Country=$SET_COUNTRY_CODE"
+    /usr/sbin/rs9113_load_modules.sh $CONFIG
+    RETVAL=$?
+    if [ $RETVAL -eq 0 ] ; then
+        echo "OK"
+    else
+        echo "FAIL"
+    fi
+    ;;
+
+  stop)
+    /usr/bin/logger -t "rs9113" -p info -s "Unloading rs9113 modules"
+    /usr/sbin/rs9113_remove_modules.sh
+    RETVAL=$?
+    if [ $RETVAL -eq 0 ] ; then
+        echo "OK"
+    else
+        echo "FAIL"
+    fi
+    ;;
+  restart)
+    $0 stop   
+    sleep 1              
+    $0 start    
+  	;;
+  status)
+    for dir in /sys/class/net/rpine[0-9]* ; do
+        if [[ -d ${dir} ]] ; then
+            echo Driver is loaded
+            exit 0
+        fi
+    done
+    echo Driver is not loaded
+    exit 3
+    ;;
+  *)
+    "Usage: $0 {start|stop|status|restart}"
+    exit 2
+    ;;
+esac
+
+exit 0
+
diff --git a/recipes-kernel/rs9113/files/rs9113/wpa_supplicant b/recipes-kernel/rs9113/files/rs9113/wpa_supplicant
new file mode 100755
index 0000000..6aa6456
--- /dev/null
+++ b/recipes-kernel/rs9113/files/rs9113/wpa_supplicant
@@ -0,0 +1,95 @@
+#! /bin/sh
+# wpa_supplicant
+# Example for /etc/init.d
+# MTS 
+#
+PATH=/sbin:/bin:/usr/bin:/usr/sbin
+PIDFILE=/var/run/wpa_suplicant
+CONF=/etc/wpa_supplicant/psk5g.conf 
+TIMELIMIT=60
+DRIVERNAME=wifi0
+upinterface() {
+    ((loopcount=1))
+    while ((loopcount < TIMELIMIT)) ; do
+        if [[ $(iw dev ${DRIVERNAME} link) =~ "Connected to " ]] ; then
+	    break;
+	fi
+	sleep 1
+        ((loopcount++))
+    done
+    ((loopcount=1))
+    while ((loopcount < TIMELIMIT)) ; do
+        ldifs="$IFS"
+        IFS=$'\n'
+        result=($(ifup wifi0 2>&1))
+        oldifs="$IFS"
+	show=$(ip addr show)
+	if [[ ${show} =~ [[:space:]]+inet[[:space:]]*[0-9].*[[:space:]]+global[[:space:]]+wifi0[[:space:]] ]] ; then
+	    break
+	fi
+	ifdown wifi0
+	sleep 1
+        ((loopcount++))
+    done
+    for (( i=0; i < ${#result[@]}; i++ )); do 
+	if [[ ${result[i]} =~ ^[[:space:]]*$ ]] ; then
+	    continue;
+	fi
+        logger -t ifup -p daemon.info "${result[i]}"
+    done
+}
+
+# ntpd	init.d script for ntpdc from ntp.isc.org
+test -x /usr/sbin/wpa_supplicant -a -r $CONF || exit 0
+if ! [[ -r $CONF ]] ; then
+    logger -s -t wpa_supplicant -p daemon.err "Cannot find configuration file $CONF"
+fi
+test -r /etc/default/rcS && . /etc/default/rcS
+
+# Functions to do individual actions
+startdaemon(){
+	echo -n "Starting wpa_supplicant: "
+	/opt/rs9113/onebox_util rpine0 enable_protocol 1 
+	/opt/rs9113/onebox_util rpine0 set_country 840
+	/opt/rs9113/onebox_util rpine0 create_vap ${DRIVERNAME} sta sw_bmiss >/dev/null 2>&1
+	start-stop-daemon --start -x wpa_supplicant -- -i ${DRIVERNAME} -D nl80211 -P $PIDFILE /var/run/ -B -c $CONF
+}
+stopdaemon(){
+	echo -n "Stopping ntpd: "
+	start-stop-daemon --stop -p $PIDFILE
+	echo "done"
+}
+
+case "$1" in
+  start)
+	if ! [[ -f ${CONF} ]] ; then
+		echo "Skipping.  Configuration file ${CONF} not found."
+		exit 1
+	fi
+	startdaemon
+	{ upinterface & }
+	;;
+  stop)
+	ifdown ${DRIVERNAME} >/dev/null 2>&1
+  	stopdaemon
+	;;
+  force-reload)
+  	stopdaemon
+	startdaemon
+	;;
+  restart)
+  	# Don't reset the tick here
+	stopdaemon
+	startdaemon
+	;;
+  reload)
+	stopdaemon
+	startdaemon
+	;;
+  *)
+	echo "Usage: wpa_supplicant { start | stop | restart | reload }" >&2
+	exit 1
+	;;
+esac
+
+exit 0