mLinux wl12xx functionality will be minimal, for testing and calibration only

3 files changed, 0 insertions, 206 deletions

diff --git a/recipes-bsp/wifiup/wifiup/wifi.init b/recipes-bsp/wifiup/wifiup/wifi.init
deleted file mode 100644
index 064a633..0000000
--- a/recipes-bsp/wifiup/wifiup/wifi.init
+++ /dev/null
@@ -1,180 +0,0 @@
-#!/bin/sh
-
-LOCK=/var/lock/wifi_lock
-WIFI_AP_CONFIG_FILE="/var/run/hostapd.conf"
-WIFI_CLIENT_CONFIG_FILE="/var/run/wpa_supplicant.conf"
-WIFI_LOG_FILE="/var/log/wpa_supplicant.log"
-UDHCPC_WIFIUP_SCRIPT="/etc/udhcpc.d/wifiup"
-FACTORY_NVS_PATH="/lib/firmware/ti-connectivity/wl1271-nvs.bin.factory"
-NVS_PATH="/var/oem/mts/wl1271-nvs.bin"
-
-if mkdir $LOCK; then
-  trap "rm -fr $LOCK" EXIT
-else
-  echo "Wifi lock not acquired, resource in use" >&2
-  exit 1
-fi
-
-cnt=$(ps -A | grep 'wifi$' | wc -l)
-
-function init() {
-  echo "initializing wifi chip"
-
-  # install factory nvs file if necessary
-  if [[ ! -f $NVS_PATH ]]; then
-    echo "$NVS_PATH not found, using factory default"
-    mount -o remount,rw /var/oem
-    mkdir -p /var/oem/mts
-    cp $FACTORY_NVS_PATH $NVS_PATH
-    mount -o remount,ro /var/oem
-  fi
-
-  # enable wifi chip
-  mts-io-sysfs store wlan-enabled 0
-  usleep 50000
-  mts-io-sysfs store wlan-enabled 1
-  sleep 1
-  # load atmel_mci module
-  lsmod | grep -q atmel_mci || {
-    modprobe atmel_mci && sleep 3
-  }
-
-  # led
-  ## INFO: code from scripts/led_ni_setup
-  echo "netdev" > /sys/class/leds/led-b/trigger
-  echo "wlan0" > /sys/class/leds/led-b/device_name
-  echo "link tx rx" > /sys/class/leds/led-b/mode
-}
-
-function start() {
-  JSON=$(curl -m 5 -s 127.0.0.1/api?fields=wifi,lan,system/macAddress,system/mode)
-
-  : ${WIFI_AP_ENABLED:='false'}
-  : ${WIFI_AP_MAC:='0F:0A:0C:0E:05:01'}
-  : ${WIFI_CLIENT_ENABLED:='true'}
-  : ${WIFI_CLIENT_MODE:='WAN'}
-  : ${SYSTEM_MODE:='STATION'}
-
-  if [ "$SYSTEM_MODE" != "ROUTER" ]; then
-    echo "Can NOT configure WiFi Access Point or Client. System Mode: $SYSTEM_MODE"
-    exit 1
-  fi
-
-  if [ "$WIFI_AP_ENABLED"  == "true" ] && [ "$WIFI_CLIENT_ENABLED"  == "true" ]; then
-    echo "Can NOT enable both Wifi Access Point and Client at the same time"
-    exit 1
-  fi
-
-  if [ "$WIFI_AP_ENABLED"  == "false" ] && [ "$WIFI_CLIENT_ENABLED"  == "false" ]; then
-    echo "Wifi is disabled.  Powering Down Wifi Chip"
-    stop
-    exit
-  fi
-
-  init
-
-  # Check to see if Wifi AP is enabled
-  # And that Wifi Client is not enabled 
-  if [ "$WIFI_AP_ENABLED" == "true" ] && [ "$WIFI_CLIENT_ENABLED" == "false" ]; then
-    echo "WiFi AP enabled - Bringing up hostapd on wlan0"
-    # initialize hostapd config 
-    wifi_ap_init
-    if [ -f $WIFI_AP_CONFIG_FILE ]; then
-      hostapd -B $WIFI_AP_CONFIG_FILE -P /var/run/hostapd_wlan0.pid
-      sleep 5
-      ip link set br0 address $WIFI_AP_MAC
-    else
-      echo "Error generating $WIFI_AP_CONFIG_FILE"
-      exit 1
-    fi
-  else
-    echo "WiFi AP is disabled"
-  fi
-
-  # Check to see if Wifi Client is enabled
-  # And that Wifi AP is not enabled
-  if [ "$WIFI_CLIENT_ENABLED" == "true" ] && [ "$WIFI_AP_ENABLED"  == "false" ]; then
-    echo "WiFi Client enabled - Configuring wlan0"
-
-    # initialize wpasupplicant config
-    wifi_client_init
-
-    ifconfig wlan0 up
-
-    # Check to see if ap is designated
-    if [ -f $WIFI_CLIENT_CONFIG_FILE ]; then
-      echo "WiFi Client - Configuring wpa supplicant"
-      # syslog option is '-s', file option is '-f <path>'
-      wpa_supplicant -B -iwlan0 -Dnl80211 -c $WIFI_CLIENT_CONFIG_FILE -P /var/run/wpa_supplicant_wlan0.pid $ -s &
-
-      sleep 10
-
-      if [ "$WIFI_CLIENT_MODE" == "WAN" ]; then
-        echo "WiFi Client - Starting DHCP client"
-        udhcpc -i wlan0 -s $UDHCPC_WIFIUP_SCRIPT -p /var/run/udhcpc_wlan0.pid > /dev/null 2>&1 &
-      elif [ "$WIFI_CLIENT_MODE" == "LAN" ]; then
-        echo "WiFi Client - Adding to bridge"
-        brctl addif br0 wlan0
-      fi
-      sleep 2
-    fi
-  else
-    echo "WiFi client is disabled"
-  fi
-}
-
-function stop() {
-  echo -n "Shutting down wifi "
-
-  if [ -f /var/run/wpa_supplicant_wlan0.pid ]; then
-    PID=$(cat /var/run/wpa_supplicant_wlan0.pid)
-    kill $PID > /dev/null 2>&1
-  fi
-  if [ -f /var/run/udhcpc_wlan0.pid ]; then
-    PID=$(cat /var/run/udhcpc_wlan0.pid)
-    kill $PID > /dev/null 2>&1
-  fi
-  if [ -f /var/run/hostapd_wlan0.pid ]; then
-    PID=$(cat /var/run/hostapd_wlan0.pid)
-    kill $PID > /dev/null 2>&1
-  fi
-
-  modprobe -r wl12xx > /dev/null 2>&1
-  modprobe -r wlcore > /dev/null 2>&1
-  modprobe -r wlcore_sdio > /dev/null 2>&1
-  modprobe -r atmel_mci > /dev/null 2>&1
-}
-
-function scan() {
-  init
-
-  # Ensure WLAN is up
-  ifconfig wlan0 up
-  # Scan
-  iw wlan0 scan
-}
-
-case "$1" in
-  "start")
-    start
-    ;;
-  "stop")
-    stop
-    ;;
-  "restart")
-    ## Stop the service and regardless of whether it was
-    ## running or not, start it again.
-    echo "Restarting wifi"
-    stop
-    start
-    ;;
-  "scan")
-    scan
-    ;;
-  *)
-    ## If no parameters are given, print which are avaiable.
-    echo "Usage: $0 {start|stop|scan|restart}"
-    exit 1
-    ;;
-esac
-
diff --git a/recipes-bsp/wifiup/wifiup/wifi.modprobe b/recipes-bsp/wifiup/wifiup/wifi.modprobe
deleted file mode 100644
index e1c3f52..0000000
--- a/recipes-bsp/wifiup/wifiup/wifi.modprobe
+++ /dev/null
@@ -1,3 +0,0 @@
-# Do not load the 'atmel_mci' module on boot.
-# Loaded by /etc/init.d/wifi after wifi power switch on.
-blacklist atmel_mci
diff --git a/recipes-bsp/wifiup/wifiup_0.1.bb b/recipes-bsp/wifiup/wifiup_0.1.bb
deleted file mode 100644
index 5c6003b..0000000
--- a/recipes-bsp/wifiup/wifiup_0.1.bb
+++ /dev/null
@@ -1,23 +0,0 @@
-DESCRIPTION = "Provides the Wifi init scripts"
-SECTION = "init scripts"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
-# Was dependent on api
-RDEPENDS_${PN} = "curl jsparser"
-PR = "r4"
-
-inherit update-rc.d
-
-INITSCRIPT_NAME = "wifi"
-INITSCRIPT_PARAMS = "defaults 73 27"
-
-SRC_URI += "file://wifi.init \
-            file://wifi.modprobe "
-
-do_install_append() {
-	install -d ${D}/etc/init.d
-	install -m 0755 ${WORKDIR}/wifi.init ${D}/etc/init.d/wifi
-
-	install -d ${D}/etc/modprobe.d
-	install -m 0644 ${WORKDIR}/wifi.modprobe ${D}/etc/modprobe.d/wifi.conf
-}