Jesse Gilles bitbake layer for the RS9113

6 files changed, 442 insertions, 0 deletions

diff --git a/recipes-bsp/multitech/mts-io/mts-io b/recipes-bsp/multitech/mts-io/mts-io
new file mode 100755
index 0000000..565b1a7
--- /dev/null
+++ b/recipes-bsp/multitech/mts-io/mts-io
@@ -0,0 +1,163 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides: mts-io
+# Default-Start:  2345
+# Default-Stop:   016
+# Short-Description: load the mts-io driver
+# Description: mts-io driver initializes the Conduit hardware and
+#	       provides user mode access through the driver to the
+#	       Conduit features.
+### END INIT INFO
+
+((fail=0))
+
+sysdir=/sys/devices/platform/mts-io
+gpiodir=/sys/class/gpio
+
+USBRST=${sysdir}/usbhub-reset
+
+RST[0]="${sysdir}/mtq-reset"
+RST[1]="${sysdir}/ap1-reset"
+RST[2]="${sysdir}/ap2-reset"
+RST[3]="${sysdir}/gnss-reset"
+RST[4]="${sysdir}/radio-reset"
+RST[5]="${sysdir}/secure-reset"
+RST[6]="${sysdir}/eth-reset"
+#RST[7]="${sysdir}/wifi-bt-reset"
+RS9113RST="${sysdir}/wifi-bt-reset"
+
+USLPTIME=30000 # 30 milliseconds
+WAIT="/bin/busybox usleep ${USLPTIME}"
+
+reset_path() {
+	pin=$1
+	/usr/bin/logger -t "mts-io" -p info Reset $pin
+	
+	if [[ -f ${pin} ]] ; then
+		if ! ( (echo 1 >${pin}) && (echo 0 >${pin}) && ${WAIT} && (echo 1 >${pin}) ) ; then
+			/usr/bin/logger -t "mts-io" -p error -s "Failed write to ${pin}"
+		fi
+	else
+		/usr/bin/logger -t "mts-io" -p error -s "${pin} does not exist"
+		return 1
+	fi
+	return 0
+}
+reset_array() {
+	((i=${#RST[@]}-1))
+	while ((i>=0)) ; do
+		if [[ -f ${RST[$i]} ]] ; then
+			if ! ( (echo 1 >${RST[i]}) ) ; then
+				/usr/bin/logger -t "mts-io" -p error -s "Failed write to ${RST[$i]}"
+			fi
+		else
+			/usr/bin/logger -t "mts-io" -p info -s "${RST[$i]} does not exist"
+			RST[$i]=""
+		fi
+		((i--))
+	done
+	while ((i>0)) ; do
+		if ((${#RST[$i] > 0)) && [[ -f ${RST[$i]} ]] ; then
+			if ! ( (echo 0 >${RST[i]}) ) ; then
+				/usr/bin/logger -t "mts-io" -p error -s "Failed write to ${RST[$i]}"
+			fi
+		else
+			/usr/bin/logger -t "mts-io" -p info -s "${RST[$i]} does not exist"
+		fi
+	done
+	${WAIT}
+	while ((i>0)) ; do
+		if ((${#RST[$i] > 0)) && [[ -f ${RST[$i]} ]] ; then
+			if ! ( (echo 1 >${RST[i]}) ) ; then
+				/usr/bin/logger -t "mts-io" -p error -s "Failed write to ${RST[$i]}"
+			fi
+		else
+			/usr/bin/logger -t "mts-io" -p info -s "${RST[$i]} does not exist"
+		fi
+	done
+}
+read_card_info() {
+  ap1_product_id=""
+  ap2_product_id=""
+  mts_hw_version=""
+
+  if [[ -d $sysdir/ap1 ]]; then
+    ap1_product_id=$(cat $sysdir/ap1/product-id)
+  fi
+  if [[ -d $sysdir/ap2 ]]; then
+    ap2_product_id=$(cat $sysdir/ap2/product-id)
+  fi
+}
+
+mfser_init() {
+  found_ap1=0
+
+  if [[ $ap1_product_id =~ ^MTAC-MFSER- ]]; then
+    /usr/bin/logger -t "mts-io" -p info -s "Linking /dev/mfser to /dev/ttyAP1"
+    ln -sf /dev/ttyAP1 /dev/mfser
+    found_ap1=1
+  fi
+
+  if [[ $ap2_product_id =~ ^MTAC-MFSER- ]]; then
+    if [[ $found_ap1 = 1 ]]; then
+      /usr/bin/logger -t "mts-io" -p info -s "Linking /dev/mfser-2 to /dev/ttyAP2"
+      ln -sf /dev/ttyAP2 /dev/mfser-2
+    else
+      /usr/bin/logger -t "mts-io" -p info -s "Linking /dev/mfser to /dev/ttyAP2"
+      ln -sf /dev/ttyAP2 /dev/mfser
+    fi
+  fi
+
+}
+
+case $1 in
+  start)
+    /usr/bin/logger -t "mts-io" -p info -s "Loading mts-io module"
+    if ! modprobe mts_io ; then
+    	((fail++))
+    fi
+    read_card_info
+    if ! reset_path $USBRST  ; then
+    	((fail++))
+    fi
+    usleep 200
+    reset_array
+    mfser_init
+    if ! reset_path $RS9113RST  ; then
+    	((fail++))
+    fi
+    
+    if ((fail == 0)) ; then
+        echo "OK"
+    else
+        echo "FAIL"
+    fi
+    exit $fail
+    ;;
+
+  stop)
+    /usr/bin/logger -t "mts-io" -p info -s "Unloading mts-io module"
+    modprobe -r mts_io
+    RETVAL=$?
+    if ((RETVAL == 0)) ; then
+        echo "OK"
+    else
+        echo "FAIL"
+    fi
+    ;;
+  status)
+  	if [[ -d ${sysdir} ]] ; then
+  		echo Driver is loaded
+  		exit 0
+  	else
+  		echo Driver is not loaded
+  		exit 3
+  	fi
+  	;;
+  *)
+    echo "Usage: $0 {start|stop|status}"
+    exit 2
+    ;;
+esac
+
+
diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/kthread.patch b/recipes-kernel/rs9113/rs9113-1.3.0/kthread.patch
new file mode 100644
index 0000000..485d0ff
--- /dev/null
+++ b/recipes-kernel/rs9113/rs9113-1.3.0/kthread.patch
@@ -0,0 +1,34 @@
+diff -rupN host/common_hal/osd/linux/onebox_thread.c host_new/common_hal/osd/linux/onebox_thread.c

+--- host/common_hal/osd/linux/onebox_thread.c	2016-03-02 14:58:53.962962812 +0530

++++ host_new/common_hal/osd/linux/onebox_thread.c	2016-03-02 14:54:04.111702855 +0530

+@@ -99,11 +99,12 @@ int kill_thread(onebox_thread_handle_t *

+ 	atomic_inc(&handle->thread_done);

+ 	ONEBOX_DEBUG(ONEBOX_ZONE_INFO,(TEXT("In %s Before setting event\n"),__func__));

+ 	rsi_set_event(&handle->thread_event);

+-	wait_for_completion(&handle->thread_complete);

++	//wait_for_completion(&handle->thread_complete);

+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)

+ 	//handle->thread_id = NULL;

+ 	kthread_stop(handle->thread_id);

+ #else

++	wait_for_completion(&handle->thread_complete);

+ 	handle->thread_id = 0;

+ #endif

+ #endif

+diff -rupN host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c host_new/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c

+--- host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c	2016-03-02 14:58:53.956962786 +0530

++++ host_new/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c	2016-03-02 14:52:32.287303701 +0530

+@@ -244,11 +244,12 @@ int kill_wlan_thread(WLAN_ADAPTER w_adap

+ 	atomic_inc(&w_adapter->txThreadDone);

+ 	ONEBOX_DEBUG(ONEBOX_ZONE_INFO,(TEXT("In %s Before setting event\n"),__func__));

+ 	os_intf_ops->onebox_set_event(&(w_adapter->sdio_scheduler_event));

+-	wait_for_completion(&w_adapter->txThreadComplete);

++	//wait_for_completion(&w_adapter->txThreadComplete);

+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)

+ 		//handle->thread_id = NULL;

+ 		kthread_stop(handle->thread_id);

+ #else

++	wait_for_completion(&w_adapter->txThreadComplete);

+ 		handle->thread_id = 0;

+ #endif

+ 	return ONEBOX_STATUS_SUCCESS;

diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/mtcdt/defconfig b/recipes-kernel/rs9113/rs9113-1.3.0/mtcdt/defconfig
new file mode 100644
index 0000000..e8dd6a7
--- /dev/null
+++ b/recipes-kernel/rs9113/rs9113-1.3.0/mtcdt/defconfig
@@ -0,0 +1,14 @@
+#
+# Automatically generated by make menuconfig: don't edit
+#
+# CONFIG_SDIO is not set
+CONFIG_USB=y
+CONFIG_LINUX=y
+# CONFIG_ANDROID is not set
+ONEBOX_CONFIG_NL80211=y
+# HOSTAPD_SUPPORT is not set
+ENABLE_WLAN=y
+ENABLE_BT=y
+# ENABLE_ZIGB is not set
+ONEBOX_DEBUG_ENABLE=y
+# RSI_SDIO_MULTI_BLOCK_SUPPORT is not set
diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_load_modules.sh b/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_load_modules.sh
new file mode 100755
index 0000000..0a16db0
--- /dev/null
+++ b/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_load_modules.sh
@@ -0,0 +1,153 @@
+#!/bin/bash
+
+if [ $# -ne 1 ]; then
+	echo "Usage: $(basename $0) COEX_MODE"
+	echo ""
+	echo "COEX_MODE options:
+		1    WLAN STATION /WIFI-Direct/WLAN PER
+		2    WLAN ACCESS POINT(including muliple APs on different vaps)
+		3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
+
+		4    BT CLASSIC MODE/BT CLASSIC PER MODE
+		5    WLAN STATION + BT CLASSIC MODE
+		6    WLAN ACCESS POINT + BT CLASSIC MODE
+		8    BT LE MODE /BT LE PER MODE
+		9    WLAN STATION + BT LE MODE
+		12   BT CLASSIC + BT LE MODE 							
+		14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
+		"
+	exit 1
+fi
+
+COEX_MODE=$1
+
+cd /opt/rs9113
+
+modprobe mac80211
+modprobe bluetooth
+
+insmod onebox_common_gpl.ko
+
+insmod wlan.ko
+insmod wlan_wep.ko
+insmod wlan_tkip.ko
+insmod wlan_ccmp.ko
+insmod wlan_acl.ko
+insmod wlan_xauth.ko
+insmod wlan_scan_sta.ko
+insmod onebox_wlan_nongpl.ko
+insmod onebox_wlan_gpl.ko
+
+#Power_mode type
+# 0 - HIGH  POWER MODE
+# 1 - MEDIUM POWER MODE 
+# 2 - LOW POWER MODE
+BT_RF_TX_POWER_MODE=0
+BT_RF_RX_POWER_MODE=0
+
+PARAMS=$PARAMS" bt_rf_tx_power_mode=$BT_RF_TX_POWER_MODE"
+PARAMS=$PARAMS" bt_rf_rx_power_mode=$BT_RF_RX_POWER_MODE"
+
+insmod onebox_bt_nongpl.ko $PARAMS 
+insmod onebox_bt_gpl.ko
+
+#Driver Mode 1 END-TO-END mode, 
+#            2 RF Evaluation Mode
+
+DRIVER_MODE=1
+
+# COEX MODE:                  
+#							1    WLAN STATION /WIFI-Direct/WLAN PER
+#							2    WLAN ACCESS POINT(including muliple APs on different vaps)
+#							3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
+
+#							4    BT CLASSIC MODE/BT CLASSIC PER MODE
+#							5    WLAN STATION + BT CLASSIC MODE
+#							6    WLAN ACCESS POINT + BT CLASSIC MODE
+#							8    BT LE MODE /BT LE PER MODE
+#							9    WLAN STATION + BT LE MODE
+#							12   BT CLASSIC + BT LE MODE 							
+#							14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
+
+#							16   ZIGBEE MODE/ ZIGBEE PER MODE
+#							17   WLAN STATION + ZIGBEE
+
+#COEX_MODE=3
+
+#To enable TA-level SDIO aggregation set 1 else set 0 to disable it.
+TA_AGGR=4
+
+#Disable Firmware load set 1 to skip FW loading through Driver else set to 0.
+SKIP_FW_LOAD=0
+
+#FW Download Mode	
+#	1 - Full Flash mode with Secondary Boot Loader
+#	2 - Full RAM mode with Secondary Boot Loader
+#	3 - Flash + RAM mode with Secondary Boot Loader
+#	4 - Firmware loading WITHOUT Secondary Boot Loader
+# Recommended to use the default mode 1
+FW_LOAD_MODE=1
+
+#ps_handshake_mode
+#   1 - No hand shake Mode
+#	2 - Packet hand shake Mode
+#	3 - GPIO Hand shake Mode
+###########Default is Packet handshake mode=2
+HANDSHAKE_MODE=2
+
+#SDIO Clock speed
+SDIO_CLOCK_SPEED=50000
+
+#Antenna diversity enable
+RSI_ANTENNA_DIVERSITY=0
+
+#Antenna Selection
+ANT_SEL_VAL=2         # 2 Internal Antenna Selection
+											# 3 External Antenna Selection
+
+####RF_POWER_MODE Selection
+
+# 0x00 For Both TX and RX High Power 
+# 0x11 For Both TX and RX Medium Power
+# 0x22 For Both TX and RX LOW Power
+
+# 0x10 For High Power TX and Medium RX Power
+# 0x20 For High Power TX and LOW RX Power
+
+# 0x01 For Medium TX and RX High Power
+# 0x21 For Medium Power TX and LOW RX Power
+
+# 0x02 For Low Power TX and RX High Power 
+# 0x12 For LOW Power TX and Medium RX Power
+
+
+WLAN_RF_PWR_MODE=0x00
+BT_RF_PWR_MODE=0x00
+ZIGB_RF_PWR_MODE=0x00
+
+#COUNTRY Selection
+# 0 World Domain
+# 840 US Domain Maps to US Region
+# 276 Germany Maps to EU Region
+# 392 Japan Maps to Japan Region
+SET_COUNTRY_CODE=0  
+
+PARAMS=" driver_mode=$DRIVER_MODE"
+PARAMS=$PARAMS" firmware_path=/opt/rs9113/firmware/"
+PARAMS=$PARAMS" onebox_zone_enabled=0x1"
+PARAMS=$PARAMS" ta_aggr=$TA_AGGR"
+PARAMS=$PARAMS" skip_fw_load=$SKIP_FW_LOAD"
+PARAMS=$PARAMS" fw_load_mode=$FW_LOAD_MODE"
+PARAMS=$PARAMS" sdio_clock=$SDIO_CLOCK_SPEED"
+PARAMS=$PARAMS" enable_antenna_diversity=$RSI_ANTENNA_DIVERSITY"
+PARAMS=$PARAMS" coex_mode=$COEX_MODE"
+#PARAMS=$PARAMS" ps_handshake_mode=$HANDSHAKE_MODE"
+PARAMS=$PARAMS" obm_ant_sel_val=$ANT_SEL_VAL"
+PARAMS=$PARAMS" wlan_rf_power_mode=$WLAN_RF_PWR_MODE"
+PARAMS=$PARAMS" bt_rf_power_mode=$BT_RF_PWR_MODE"
+PARAMS=$PARAMS" zigb_rf_power_mode=$ZIGB_RF_PWR_MODE"
+PARAMS=$PARAMS" country_code=$SET_COUNTRY_CODE"
+
+insmod onebox_nongpl.ko	$PARAMS
+insmod onebox_gpl.ko
+
diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh b/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh
new file mode 100755
index 0000000..bcd885a
--- /dev/null
+++ b/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh
@@ -0,0 +1,29 @@
+killall -9 wpa_supplicant
+killall -9 hostapd
+rm -rf /var/run/wpa_supplicant/
+sleep 2
+
+### COMMON HAL MODULES 
+rmmod onebox_gpl.ko
+rmmod onebox_nongpl.ko
+
+###WLAN MODULES
+rmmod onebox_wlan_gpl.ko
+rmmod onebox_wlan_nongpl.ko
+rmmod wlan_scan_sta.ko
+rmmod wlan_xauth.ko
+rmmod wlan_acl.ko
+rmmod wlan_tkip.ko
+rmmod wlan_ccmp.ko
+rmmod wlan_wep.ko
+rmmod wlan.ko
+
+###BT MODULES
+rmmod onebox_bt_gpl.ko
+rmmod onebox_bt_nongpl.ko
+
+###ZIGB MODULES
+#rmmod onebox_zigb_gpl.ko
+#rmmod onebox_zigb_nongpl.ko
+
+rmmod onebox_common_gpl.ko
diff --git a/recipes-kernel/rs9113/rs9113_1.3.0.bb b/recipes-kernel/rs9113/rs9113_1.3.0.bb
new file mode 100644
index 0000000..be52385
--- /dev/null
+++ b/recipes-kernel/rs9113/rs9113_1.3.0.bb
@@ -0,0 +1,49 @@
+DESCRIPTION = "USB Driver for Redpine RS9113"
+SECTION = "base"
+PRIORITY = "optional"
+LICENSE = "Proprietary"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
+
+SRC_URI = " \
+    file://RS9113.NBZ.NL.GENR.LNX.1.3.0.tgz \
+    file://kthread.patch \
+    file://defconfig \
+    file://rs9113_load_modules.sh \
+    file://rs9113_remove_modules.sh \
+    file://rs9113.init \
+"
+
+S = "${WORKDIR}/RS9113.NBZ.NL.GENR.LNX.1.3.0/source/host"
+
+EXTRA_OEMAKE = " KERNELDIR=${STAGING_KERNEL_DIR} \
+                 CROSS_COMPILE=${TARGET_PREFIX} \
+                 ARCH=arm \
+                 WLAN_COMPILE_FLAGS='' \
+                "
+
+do_configure() {
+   cp ${WORKDIR}/defconfig .config
+}
+
+do_compile () {
+   unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+   oe_runmake
+}
+
+FILES_${PN} = "/opt/rs9113 ${sbindir}"
+FILES_${PN}-dbg = "/opt/rs9113/.debug/"
+
+PARALLEL_MAKE = ""
+
+do_install() {
+   install -m 0755 -d ${D}/opt/rs9113
+   cp -r ${S}/release/* ${D}/opt/rs9113/
+
+   install -m 0755 -d ${D}${sbindir}
+   install -m 0755 ${WORKDIR}/rs9113_load_modules.sh ${D}${sbindir}/
+   install -m 0755 ${WORKDIR}/rs9113_remove_modules.sh ${D}${sbindir}/
+}
+
+python do_clean() {
+    bb.note("Skipping clean in rs9113 recipe.")
+}