Removed rs9113 layer in the wrong directory.

13 files changed, 0 insertions, 788 deletions

diff --git a/rs9113/rs9113-1.3.0/kthread.patch b/rs9113/rs9113-1.3.0/kthread.patch
deleted file mode 100644
index f802c38..0000000
--- a/rs9113/rs9113-1.3.0/kthread.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-diff -ruPN old/source/host/common_hal/osd/linux/onebox_thread.c new/source/host/common_hal/osd/linux/onebox_thread.c
---- old/source/host/common_hal/osd/linux/onebox_thread.c	2016-08-03 10:15:47.000000000 -0500
-+++ new/source/host/common_hal/osd/linux/onebox_thread.c	2016-08-03 12:10:00.000000000 -0500
-@@ -99,11 +99,12 @@
- 	atomic_inc(&handle->thread_done);
- 	ONEBOX_DEBUG(ONEBOX_ZONE_INFO,(TEXT("In %s Before setting event\n"),__func__));
- 	rsi_set_event(&handle->thread_event);
--	wait_for_completion(&handle->thread_complete);
-+	//wait_for_completion(&handle->thread_complete);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
- 	//handle->thread_id = NULL;
- 	kthread_stop(handle->thread_id);
- #else
-+	wait_for_completion(&handle->thread_complete);
- 	handle->thread_id = 0;
- #endif
- #endif
-diff -ruPN old/source/host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c new/source/host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c
---- old/source/host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c	2016-08-03 10:15:48.000000000 -0500
-+++ new/source/host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c	2016-08-03 12:10:00.000000000 -0500
-@@ -244,11 +244,12 @@
- 	atomic_inc(&w_adapter->txThreadDone);
- 	ONEBOX_DEBUG(ONEBOX_ZONE_INFO,(TEXT("In %s Before setting event\n"),__func__));
- 	os_intf_ops->onebox_set_event(&(w_adapter->sdio_scheduler_event));
--	wait_for_completion(&w_adapter->txThreadComplete);
-+	//wait_for_completion(&w_adapter->txThreadComplete);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
- 		//handle->thread_id = NULL;
- 		kthread_stop(handle->thread_id);
- #else
-+	wait_for_completion(&w_adapter->txThreadComplete);
- 		handle->thread_id = 0;
- #endif
- 	return ONEBOX_STATUS_SUCCESS;
diff --git a/rs9113/rs9113-1.3.0/mtcdt/defconfig b/rs9113/rs9113-1.3.0/mtcdt/defconfig
deleted file mode 100644
index e8dd6a7..0000000
--- a/rs9113/rs9113-1.3.0/mtcdt/defconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Automatically generated by make menuconfig: don't edit
-#
-# CONFIG_SDIO is not set
-CONFIG_USB=y
-CONFIG_LINUX=y
-# CONFIG_ANDROID is not set
-ONEBOX_CONFIG_NL80211=y
-# HOSTAPD_SUPPORT is not set
-ENABLE_WLAN=y
-ENABLE_BT=y
-# ENABLE_ZIGB is not set
-ONEBOX_DEBUG_ENABLE=y
-# RSI_SDIO_MULTI_BLOCK_SUPPORT is not set
diff --git a/rs9113/rs9113-1.3.0/rs9113.default b/rs9113/rs9113-1.3.0/rs9113.default
deleted file mode 100644
index 4b4a62b..0000000
--- a/rs9113/rs9113-1.3.0/rs9113.default
+++ /dev/null
@@ -1,14 +0,0 @@
-#  COEX_MODE options:
-#	1    WLAN STATION /WIFI-Direct/WLAN PER
-#	2    WLAN ACCESS POINT(including muliple APs on different vaps)
-#	3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
-#	4    BT CLASSIC MODE/BT CLASSIC PER MODE
-#	5    WLAN STATION + BT CLASSIC MODE
-#	6    WLAN ACCESS POINT + BT CLASSIC MODE
-#	8    BT LE MODE /BT LE PER MODE
-#	9    WLAN STATION + BT LE MODE
-#	12   BT CLASSIC + BT LE MODE 							
-#	14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
-#	
-COEXISTENCE=6
-
diff --git a/rs9113/rs9113-1.3.0/rs9113.init b/rs9113/rs9113-1.3.0/rs9113.init
deleted file mode 100755
index 91ea057..0000000
--- a/rs9113/rs9113-1.3.0/rs9113.init
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/bash
-# Note that none of the INIT stuff below works in the current open-embedded.
-### BEGIN INIT INFO
-# Provides: rs9113
-# Required-Start: mts-io
-# Default-Start:  S
-# Default-Stop:   0 6
-# X-Start-Before: networking
-# Short-Description: load the rs9113 drivers
-# Description: rs9113 drivers are used to provide access to Bluetooth
-#	       and WiFi.
-### END INIT INFO
-
-CONFIG=/etc/default/rs9113
-
-[ -f $CONFIG ] || exit 1
-
-. $CONFIG
-
-case "$1" in
-  start)
-    /usr/bin/logger -t "rs9113" -p info -s "Loading rs9113 modules"
-    /usr/sbin/rs9113_load_modules.sh $COEXISTENCE
-    RETVAL=$?
-    if [ $RETVAL -eq 0 ] ; then
-        echo "OK"
-    else
-        echo "FAIL"
-    fi
-    ;;
-
-  stop)
-    /usr/bin/logger -t "rs9113" -p info -s "Unloading rs9113 modules"
-    /usr/sbin/rs9113_remove_modules.sh
-    RETVAL=$?
-    if [ $RETVAL -eq 0 ] ; then
-        echo "OK"
-    else
-        echo "FAIL"
-    fi
-    ;;
-  restart)
-    $0 stop   
-    sleep 1              
-    $0 start    
-  	;;
-  status)
-    for dir in /sys/class/net/rpine[0-9]* ; do
-        if [[ -d ${dir} ]] ; then
-            echo Driver is loaded
-            exit 0
-        fi
-    done
-    echo Driver is not loaded
-    exit 3
-    ;;
-  *)
-    "Usage: $0 {start|stop|status|restart}"
-    exit 2
-    ;;
-esac
-
-exit 0
-
diff --git a/rs9113/rs9113-1.3.0/rs9113_load_modules.sh b/rs9113/rs9113-1.3.0/rs9113_load_modules.sh
deleted file mode 100755
index 0a16db0..0000000
--- a/rs9113/rs9113-1.3.0/rs9113_load_modules.sh
+++ /dev/null
@@ -1,153 +0,0 @@
-#!/bin/bash
-
-if [ $# -ne 1 ]; then
-	echo "Usage: $(basename $0) COEX_MODE"
-	echo ""
-	echo "COEX_MODE options:
-		1    WLAN STATION /WIFI-Direct/WLAN PER
-		2    WLAN ACCESS POINT(including muliple APs on different vaps)
-		3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
-
-		4    BT CLASSIC MODE/BT CLASSIC PER MODE
-		5    WLAN STATION + BT CLASSIC MODE
-		6    WLAN ACCESS POINT + BT CLASSIC MODE
-		8    BT LE MODE /BT LE PER MODE
-		9    WLAN STATION + BT LE MODE
-		12   BT CLASSIC + BT LE MODE 							
-		14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
-		"
-	exit 1
-fi
-
-COEX_MODE=$1
-
-cd /opt/rs9113
-
-modprobe mac80211
-modprobe bluetooth
-
-insmod onebox_common_gpl.ko
-
-insmod wlan.ko
-insmod wlan_wep.ko
-insmod wlan_tkip.ko
-insmod wlan_ccmp.ko
-insmod wlan_acl.ko
-insmod wlan_xauth.ko
-insmod wlan_scan_sta.ko
-insmod onebox_wlan_nongpl.ko
-insmod onebox_wlan_gpl.ko
-
-#Power_mode type
-# 0 - HIGH  POWER MODE
-# 1 - MEDIUM POWER MODE 
-# 2 - LOW POWER MODE
-BT_RF_TX_POWER_MODE=0
-BT_RF_RX_POWER_MODE=0
-
-PARAMS=$PARAMS" bt_rf_tx_power_mode=$BT_RF_TX_POWER_MODE"
-PARAMS=$PARAMS" bt_rf_rx_power_mode=$BT_RF_RX_POWER_MODE"
-
-insmod onebox_bt_nongpl.ko $PARAMS 
-insmod onebox_bt_gpl.ko
-
-#Driver Mode 1 END-TO-END mode, 
-#            2 RF Evaluation Mode
-
-DRIVER_MODE=1
-
-# COEX MODE:                  
-#							1    WLAN STATION /WIFI-Direct/WLAN PER
-#							2    WLAN ACCESS POINT(including muliple APs on different vaps)
-#							3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
-
-#							4    BT CLASSIC MODE/BT CLASSIC PER MODE
-#							5    WLAN STATION + BT CLASSIC MODE
-#							6    WLAN ACCESS POINT + BT CLASSIC MODE
-#							8    BT LE MODE /BT LE PER MODE
-#							9    WLAN STATION + BT LE MODE
-#							12   BT CLASSIC + BT LE MODE 							
-#							14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
-
-#							16   ZIGBEE MODE/ ZIGBEE PER MODE
-#							17   WLAN STATION + ZIGBEE
-
-#COEX_MODE=3
-
-#To enable TA-level SDIO aggregation set 1 else set 0 to disable it.
-TA_AGGR=4
-
-#Disable Firmware load set 1 to skip FW loading through Driver else set to 0.
-SKIP_FW_LOAD=0
-
-#FW Download Mode	
-#	1 - Full Flash mode with Secondary Boot Loader
-#	2 - Full RAM mode with Secondary Boot Loader
-#	3 - Flash + RAM mode with Secondary Boot Loader
-#	4 - Firmware loading WITHOUT Secondary Boot Loader
-# Recommended to use the default mode 1
-FW_LOAD_MODE=1
-
-#ps_handshake_mode
-#   1 - No hand shake Mode
-#	2 - Packet hand shake Mode
-#	3 - GPIO Hand shake Mode
-###########Default is Packet handshake mode=2
-HANDSHAKE_MODE=2
-
-#SDIO Clock speed
-SDIO_CLOCK_SPEED=50000
-
-#Antenna diversity enable
-RSI_ANTENNA_DIVERSITY=0
-
-#Antenna Selection
-ANT_SEL_VAL=2         # 2 Internal Antenna Selection
-											# 3 External Antenna Selection
-
-####RF_POWER_MODE Selection
-
-# 0x00 For Both TX and RX High Power 
-# 0x11 For Both TX and RX Medium Power
-# 0x22 For Both TX and RX LOW Power
-
-# 0x10 For High Power TX and Medium RX Power
-# 0x20 For High Power TX and LOW RX Power
-
-# 0x01 For Medium TX and RX High Power
-# 0x21 For Medium Power TX and LOW RX Power
-
-# 0x02 For Low Power TX and RX High Power 
-# 0x12 For LOW Power TX and Medium RX Power
-
-
-WLAN_RF_PWR_MODE=0x00
-BT_RF_PWR_MODE=0x00
-ZIGB_RF_PWR_MODE=0x00
-
-#COUNTRY Selection
-# 0 World Domain
-# 840 US Domain Maps to US Region
-# 276 Germany Maps to EU Region
-# 392 Japan Maps to Japan Region
-SET_COUNTRY_CODE=0  
-
-PARAMS=" driver_mode=$DRIVER_MODE"
-PARAMS=$PARAMS" firmware_path=/opt/rs9113/firmware/"
-PARAMS=$PARAMS" onebox_zone_enabled=0x1"
-PARAMS=$PARAMS" ta_aggr=$TA_AGGR"
-PARAMS=$PARAMS" skip_fw_load=$SKIP_FW_LOAD"
-PARAMS=$PARAMS" fw_load_mode=$FW_LOAD_MODE"
-PARAMS=$PARAMS" sdio_clock=$SDIO_CLOCK_SPEED"
-PARAMS=$PARAMS" enable_antenna_diversity=$RSI_ANTENNA_DIVERSITY"
-PARAMS=$PARAMS" coex_mode=$COEX_MODE"
-#PARAMS=$PARAMS" ps_handshake_mode=$HANDSHAKE_MODE"
-PARAMS=$PARAMS" obm_ant_sel_val=$ANT_SEL_VAL"
-PARAMS=$PARAMS" wlan_rf_power_mode=$WLAN_RF_PWR_MODE"
-PARAMS=$PARAMS" bt_rf_power_mode=$BT_RF_PWR_MODE"
-PARAMS=$PARAMS" zigb_rf_power_mode=$ZIGB_RF_PWR_MODE"
-PARAMS=$PARAMS" country_code=$SET_COUNTRY_CODE"
-
-insmod onebox_nongpl.ko	$PARAMS
-insmod onebox_gpl.ko
-
diff --git a/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh b/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh
deleted file mode 100755
index bcd885a..0000000
--- a/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-killall -9 wpa_supplicant
-killall -9 hostapd
-rm -rf /var/run/wpa_supplicant/
-sleep 2
-
-### COMMON HAL MODULES 
-rmmod onebox_gpl.ko
-rmmod onebox_nongpl.ko
-
-###WLAN MODULES
-rmmod onebox_wlan_gpl.ko
-rmmod onebox_wlan_nongpl.ko
-rmmod wlan_scan_sta.ko
-rmmod wlan_xauth.ko
-rmmod wlan_acl.ko
-rmmod wlan_tkip.ko
-rmmod wlan_ccmp.ko
-rmmod wlan_wep.ko
-rmmod wlan.ko
-
-###BT MODULES
-rmmod onebox_bt_gpl.ko
-rmmod onebox_bt_nongpl.ko
-
-###ZIGB MODULES
-#rmmod onebox_zigb_gpl.ko
-#rmmod onebox_zigb_nongpl.ko
-
-rmmod onebox_common_gpl.ko
diff --git a/rs9113/rs9113-1.4.3/mtcdt/defconfig b/rs9113/rs9113-1.4.3/mtcdt/defconfig
deleted file mode 100644
index 84437a6..0000000
--- a/rs9113/rs9113-1.4.3/mtcdt/defconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Automatically generated by make menuconfig: don't edit
-#
-ENABLE_USB=y
-# ENABLE_SDIO is not set
-CONFIG_LINUX=y
-# CONFIG_ANDROID is not set
-ONEBOX_CONFIG_NL80211=y
-# HOSTAPD_SUPPORT is not set
-ENABLE_WLAN=y
-ENABLE_BT=y
-# ENABLE_ZIGB is not set
diff --git a/rs9113/rs9113-1.4.3/rs9113.default b/rs9113/rs9113-1.4.3/rs9113.default
deleted file mode 100644
index c05357d..0000000
--- a/rs9113/rs9113-1.4.3/rs9113.default
+++ /dev/null
@@ -1,48 +0,0 @@
-# Parameters for rs9113 driver
-#
-# Enable Antenna Diversity (1)
-RSI_ANTENNA_DIVERSITY=0
-
-# COEX_MODE options:
-#		1    WLAN STATION /WIFI-Direct/WLAN PER
-#		2    WLAN ACCESS POINT(including muliple APs on different vaps)
-#		3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
-#		4    BT CLASSIC MODE/BT CLASSIC PER MODE
-#		6    WLAN ACCESS POINT + BT CLASSIC MODE
-#		8    BT LE MODE /BT LE PER MODE
-#		9    WLAN STATION + BT LE MODE
-#		12   BT CLASSIC + BT LE MODE 							
-#		14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
-COEX_MODE=6
-
-# Power selection
-#	0x00 - For Both TX and RX High Power
-#	0x11 - For Both TX and RX Medium Power
-#	0x22 - For Both TX and RX LOW Power
-#	0x10 - For High Power TX and Medium RX Power
-#	0x20 - For High Power TX and LOW RX Power
-#	0x01 - For Medium TX and RX High Power
-#	0x21 - For Medium Power TX and LOW RX Power
-#	0x02 - For Low Power TX and RX High Power
-#	0x12 - For LOW Power TX and Medium RX Power
-WLAN_RF_PWR_MODE=0x00
-BT_RF_PWR_MODE=0x00
-
-#Power_mode type
-# 0 - HIGH  POWER MODE
-# 1 - MEDIUM POWER MODE 
-# 2 - LOW POWER MODE
-BT_RF_TX_POWER_MODE=0
-BT_RF_RX_POWER_MODE=0
-
-# Country Selection
-# 0 World Domain
-# 840 US Domain Maps to US Region
-# 276 Germany Maps to EU Region
-# 392 Japan Maps to Japan Region
-# from ISO 3166-1
-SET_COUNTRY_CODE=0
-
-#	2 – Select internal antenna
-#	3 – Select external antenna
-ANT_SEL_VAL=2
diff --git a/rs9113/rs9113-1.4.3/rs9113.init b/rs9113/rs9113-1.4.3/rs9113.init
deleted file mode 100755
index 2351ae4..0000000
--- a/rs9113/rs9113-1.4.3/rs9113.init
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-# Note that none of the INIT stuff below works in the current open-embedded.
-### BEGIN INIT INFO
-# Provides: rs9113
-# Required-Start: mts-io
-# Default-Start:  S
-# Default-Stop:   0 6
-# X-Start-Before: networking
-# Short-Description: load the rs9113 drivers
-# Description: rs9113 drivers are used to provide access to Bluetooth
-#	       and WiFi.
-### END INIT INFO
-
-CONFIG=/etc/default/rs9113
-MTS_IODIR=/sys/devices/platform/mts-io
-RS9113_RESET=${MTS_IODIR}/wifi-bt-reset
-RS9113_INT=${MTS_IODIR}/wifi-bt-int
-RS9113_WKUP=${MTS_IODIR}/wifi-bt-lpwkup
-
-[ -f $CONFIG ] || exit 1
-
-. $CONFIG
-
-case "$1" in
-  start)
-    # Reset the RS9113 chip is ready, and
-	# wait for it to settle.
-    if [ -f "$RS9113_RESET" ] ; then
-    	echo 1 >$RS9113_RESET
-	usleep 100
-    	echo 0 >$RS9113_RESET
-	usleep 100
-    	echo 1 >$RS9113_RESET
-	N=1
-	while [ $N -lt 20 ] ; do
-		INT=$(cat $RS9113_INT)
-		WKUP=$(cat $RS9113_WKUP)
-		if [ $INT -ne 1 -o $WKUP -ne 1 ] ; then
-			usleep 100
-		else
-			break
-		fi
-	done
-	if [ $INT -ne 1 ] ; then
-		logger -t rs9113 -p error -s "$RS9113_INT is $INT"
-	fi
-	if [ $WKUP -ne 1 ] ; then
-		logger -t rs9113 -p error -s "$RS9113_WKUP is $WKUP"
-	fi
-    fi
-    /usr/bin/logger -t "rs9113" -p info -s "Loading rs9113 modules with COEX=$COEX_MODE and Country=$SET_COUNTRY_CODE"
-    /usr/sbin/rs9113_load_modules.sh $CONFIG
-    RETVAL=$?
-    if [ $RETVAL -eq 0 ] ; then
-        echo "OK"
-    else
-        echo "FAIL"
-    fi
-    ;;
-
-  stop)
-    /usr/bin/logger -t "rs9113" -p info -s "Unloading rs9113 modules"
-    /usr/sbin/rs9113_remove_modules.sh
-    RETVAL=$?
-    if [ $RETVAL -eq 0 ] ; then
-        echo "OK"
-    else
-        echo "FAIL"
-    fi
-    ;;
-  restart)
-    $0 stop   
-    sleep 1              
-    $0 start    
-  	;;
-  status)
-    for dir in /sys/class/net/rpine[0-9]* ; do
-        if [[ -d ${dir} ]] ; then
-            echo Driver is loaded
-            exit 0
-        fi
-    done
-    echo Driver is not loaded
-    exit 3
-    ;;
-  *)
-    "Usage: $0 {start|stop|status|restart}"
-    exit 2
-    ;;
-esac
-
-exit 0
-
diff --git a/rs9113/rs9113-1.4.3/rs9113_load_modules.sh b/rs9113/rs9113-1.4.3/rs9113_load_modules.sh
deleted file mode 100755
index 4f293dd..0000000
--- a/rs9113/rs9113-1.4.3/rs9113_load_modules.sh
+++ /dev/null
@@ -1,178 +0,0 @@
-#!/bin/bash
-defaults=/etc/default/rs9113
-usage()
-{
-	echo "Configuration values:"
-	echo "	COEX_MODE"
-	echo "	RSI_ANTENNA_DIVERSITY"
-	echo "	ANT_SEL_VAL"
-	echo "	SET_COUNTRY_CODE"
-	echo "	WLAN_RF_PWR_MODE"
-	echo "	BT_RF_PWR_MODE"
-	echo "	COEX_MODE"
-	echo "	BT_RF_TX_POWER_MODE"
-	echo "	BT_RF_RX_POWER_MODE"
-	echo "Usage: $(basename $0) [config file]"
-	echo ""
-	echo "Config file is typically
-		/etc/default/rs9113 with the above parameters."
-	exit 1
-}
-if (($# > 1)); then
-  usage
-fi
-
-if ((${#COEX_MODE}==0)) && [[ -r $defaults ]]; then
-  set -e
-  . $defaults
-  set +e
-fi
-
-if (($# > 0)) && [[ -r $1 ]]; then
-  set -e
-  . $1
-  set +e
-fi
-  
-err=0
-for x in COEX_MODE RSI_ANTENNA_DIVERSITY ANT_SEL_VAL SET_COUNTRY_CODE	WLAN_RF_PWR_MODE \
-	  BT_RF_PWR_MODE COEX_MODE BT_RF_TX_POWER_MODE BT_RF_RX_POWER_MODE ; do
-  eval var=\$$x
-  if ((${#var} < 1)) ; then
-    echo Need to provide ${x} for configuration
-    err=1
-  fi
-done
-if((err)) ; then
-  usage
-fi
-cd /opt/rs9113
-
-modprobe mac80211
-modprobe bluetooth
-
-insmod onebox_common_gpl.ko
-
-insmod wlan.ko
-insmod wlan_wep.ko
-insmod wlan_tkip.ko
-insmod wlan_ccmp.ko
-insmod wlan_acl.ko
-insmod wlan_xauth.ko
-insmod wlan_scan_sta.ko
-insmod onebox_wlan_nongpl.ko
-insmod onebox_wlan_gpl.ko
-
-#BT Power_mode type
-# 0 - HIGH  POWER MODE
-# 1 - MEDIUM POWER MODE 
-# 2 - LOW POWER MODE
-
-PARAMS=$PARAMS" bt_rf_tx_power_mode=$BT_RF_TX_POWER_MODE"
-PARAMS=$PARAMS" bt_rf_rx_power_mode=$BT_RF_RX_POWER_MODE"
-
-insmod onebox_bt_nongpl.ko $PARAMS 
-insmod onebox_bt_gpl.ko
-
-#Driver Mode 1 END-TO-END mode, 
-#            2 RF Evaluation Mode
-
-DRIVER_MODE=1
-
-# COEX MODE:                  
-#							1    WLAN STATION /WIFI-Direct/WLAN PER
-#							2    WLAN ACCESS POINT(including muliple APs on different vaps)
-#							3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
-
-#							4    BT CLASSIC MODE/BT CLASSIC PER MODE
-#							5    WLAN STATION + BT CLASSIC MODE
-#							6    WLAN ACCESS POINT + BT CLASSIC MODE
-#							8    BT LE MODE /BT LE PER MODE
-#							9    WLAN STATION + BT LE MODE
-#							12   BT CLASSIC + BT LE MODE 							
-#							14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
-
-#							16   ZIGBEE MODE/ ZIGBEE PER MODE
-#							17   WLAN STATION + ZIGBEE
-
-#COEX_MODE=3
-
-#To enable TA-level SDIO aggregation set 1 else set 0 to disable it.
-TA_AGGR=4
-
-#Disable Firmware load set 1 to skip FW loading through Driver else set to 0.
-SKIP_FW_LOAD=0
-
-#FW Download Mode	
-#	1 - Full Flash mode with Secondary Boot Loader
-#	2 - Full RAM mode with Secondary Boot Loader
-#	3 - Flash + RAM mode with Secondary Boot Loader
-#	4 - Firmware loading WITHOUT Secondary Boot Loader
-# Recommended to use the default mode 1
-FW_LOAD_MODE=1
-
-#ps_handshake_mode
-#   1 - No hand shake Mode
-#	2 - Packet hand shake Mode
-#	3 - GPIO Hand shake Mode
-###########Default is Packet handshake mode=2
-HANDSHAKE_MODE=2
-
-#SDIO Clock speed
-SDIO_CLOCK_SPEED=50000
-
-#Antenna diversity enable
-#RSI_ANTENNA_DIVERSITY=0
-
-#Antenna Selection
-#ANT_SEL_VAL=2         # 2 Internal Antenna Selection
-											# 3 External Antenna Selection
-
-####RF_POWER_MODE Selection
-
-# 0x00 For Both TX and RX High Power 
-# 0x11 For Both TX and RX Medium Power
-# 0x22 For Both TX and RX LOW Power
-
-# 0x10 For High Power TX and Medium RX Power
-# 0x20 For High Power TX and LOW RX Power
-
-# 0x01 For Medium TX and RX High Power
-# 0x21 For Medium Power TX and LOW RX Power
-
-# 0x02 For Low Power TX and RX High Power 
-# 0x12 For LOW Power TX and Medium RX Power
-
-
-#WLAN_RF_PWR_MODE=0x00
-#BT_RF_PWR_MODE=0x00
-#ZIGB_RF_PWR_MODE=0x00
-
-#COUNTRY Selection
-# 0 World Domain
-# 840 US Domain Maps to US Region
-# 276 Germany Maps to EU Region
-# 392 Japan Maps to Japan Region
-#SET_COUNTRY_CODE=0
-
-PARAMS=" driver_mode=$DRIVER_MODE"
-PARAMS=$PARAMS" firmware_path=/opt/rs9113/firmware/"
-PARAMS=$PARAMS" onebox_zone_enabled=0x1"
-PARAMS=$PARAMS" ta_aggr=$TA_AGGR"
-PARAMS=$PARAMS" skip_fw_load=$SKIP_FW_LOAD"
-PARAMS=$PARAMS" fw_load_mode=$FW_LOAD_MODE"
-PARAMS=$PARAMS" sdio_clock=$SDIO_CLOCK_SPEED"
-PARAMS=$PARAMS" enable_antenna_diversity=$RSI_ANTENNA_DIVERSITY"
-PARAMS=$PARAMS" coex_mode=$COEX_MODE"
-#PARAMS=$PARAMS" ps_handshake_mode=$HANDSHAKE_MODE"
-PARAMS=$PARAMS" obm_ant_sel_val=$ANT_SEL_VAL"
-PARAMS=$PARAMS" wlan_rf_power_mode=$WLAN_RF_PWR_MODE"
-PARAMS=$PARAMS" bt_rf_power_mode=$BT_RF_PWR_MODE"
-# PARAMS=$PARAMS" zigb_rf_power_mode=$ZIGB_RF_PWR_MODE"
-PARAMS=$PARAMS" country_code=$SET_COUNTRY_CODE"
-
-if ! insmod onebox_nongpl.ko	$PARAMS ; then
-	echo onebox_nongpl.ko $PARAMS 
-fi
-insmod onebox_gpl.ko
-
diff --git a/rs9113/rs9113-1.4.3/rs9113_remove_modules.sh b/rs9113/rs9113-1.4.3/rs9113_remove_modules.sh
deleted file mode 100755
index bcd885a..0000000
--- a/rs9113/rs9113-1.4.3/rs9113_remove_modules.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-killall -9 wpa_supplicant
-killall -9 hostapd
-rm -rf /var/run/wpa_supplicant/
-sleep 2
-
-### COMMON HAL MODULES 
-rmmod onebox_gpl.ko
-rmmod onebox_nongpl.ko
-
-###WLAN MODULES
-rmmod onebox_wlan_gpl.ko
-rmmod onebox_wlan_nongpl.ko
-rmmod wlan_scan_sta.ko
-rmmod wlan_xauth.ko
-rmmod wlan_acl.ko
-rmmod wlan_tkip.ko
-rmmod wlan_ccmp.ko
-rmmod wlan_wep.ko
-rmmod wlan.ko
-
-###BT MODULES
-rmmod onebox_bt_gpl.ko
-rmmod onebox_bt_nongpl.ko
-
-###ZIGB MODULES
-#rmmod onebox_zigb_gpl.ko
-#rmmod onebox_zigb_nongpl.ko
-
-rmmod onebox_common_gpl.ko
diff --git a/rs9113/rs9113_1.3.0.bb b/rs9113/rs9113_1.3.0.bb
deleted file mode 100644
index 80be133..0000000
--- a/rs9113/rs9113_1.3.0.bb
+++ /dev/null
@@ -1,59 +0,0 @@
-DESCRIPTION = "USB Driver for Redpine RS9113"
-SECTION = "base"
-PRIORITY = "optional"
-LICENSE = "Proprietary"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
-SRCREV = "${AUTOREV}"
-SRC_URI = " \
-    git://git@gitlab.multitech.net/mlinux/Redpine.git;protocol=ssh;branch=1.3.0 \
-    file://kthread.patch;patch=1;pnum=3 \
-    file://defconfig \
-    file://rs9113_load_modules.sh \
-    file://rs9113_remove_modules.sh \
-    file://rs9113.init \
-    file://rs9113.default \
-"
-
-S = "${WORKDIR}/git/source/host"
-FILESEXTRAPATHS_prepend := "${WORKDIR}/git/patches:"
-
-EXTRA_OEMAKE = " KERNELDIR=${STAGING_KERNEL_DIR} \
-                 CROSS_COMPILE=${TARGET_PREFIX} \
-                 ARCH=arm \
-                 WLAN_COMPILE_FLAGS='' \
-                "
-                
-inherit update-rc.d
-INITSCRIPT_NAME = "rs9113"
-INITSCRIPT_PARAMS = "start 00 2 3 4 5 . stop 81 0 6 1 ."
-
-do_configure() {
-   cp ${WORKDIR}/defconfig .config
-}
-
-do_compile () {
-   unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
-   oe_runmake
-}
-
-FILES_${PN} = "/opt/rs9113 ${sbindir} ${sysconfdir}"
-FILES_${PN}-dbg = "/opt/rs9113/.debug/"
-
-PARALLEL_MAKE = ""
-
-do_install() {
-   install -m 0755 -d ${D}/opt/rs9113
-   install -d ${D}${sysconfdir}/init.d/
-   install -d ${D}${sysconfdir}/default/
-   cp -r ${S}/release/* ${D}/opt/rs9113/
-
-   install -m 0755 -d ${D}${sbindir}
-   install -m 0755 ${WORKDIR}/rs9113_load_modules.sh ${D}${sbindir}/
-   install -m 0755 ${WORKDIR}/rs9113_remove_modules.sh ${D}${sbindir}/
-   install -m 0755 ${WORKDIR}/rs9113.init ${D}${sysconfdir}/init.d/rs9113
-   install -m 0644 ${WORKDIR}/rs9113.default ${D}${sysconfdir}/default/rs9113
-}
-
-python do_clean() {
-    bb.note("Skipping clean in rs9113 recipe.")
-}
diff --git a/rs9113/rs9113_1.4.3.bb b/rs9113/rs9113_1.4.3.bb
deleted file mode 100644
index 32df0cf..0000000
--- a/rs9113/rs9113_1.4.3.bb
+++ /dev/null
@@ -1,61 +0,0 @@
-DESCRIPTION = "USB Driver for Redpine RS9113"
-SECTION = "base"
-PRIORITY = "optional"
-LICENSE = "Proprietary"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
-SRCREV = "${AUTOREV}"
-SRC_URI = " \
-    git://git@gitlab.multitech.net/mlinux/Redpine.git;protocol=ssh;branch=1.4.3 \
-    file://defconfig \
-    file://rs9113_load_modules.sh \
-    file://rs9113_remove_modules.sh \
-    file://rs9113.init \
-    file://rs9113.default \
-"
-
-# file://kthread.patch;patch=1;pnum=3
-
-S = "${WORKDIR}/git/source/host"
-FILESEXTRAPATHS_prepend := "${WORKDIR}/git/patches:"
-
-EXTRA_OEMAKE = " KERNELDIR=${STAGING_KERNEL_DIR} \
-                 CROSS_COMPILE=${TARGET_PREFIX} \
-                 ARCH=arm \
-                 WLAN_COMPILE_FLAGS='' \
-		 V=1 \
-                "
-                
-inherit update-rc.d
-INITSCRIPT_NAME = "rs9113"
-INITSCRIPT_PARAMS = "start 00 2 3 4 5 . stop 81 0 6 1 ."
-
-do_configure() {
-   cp ${WORKDIR}/defconfig .config
-}
-
-do_compile () {
-   unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
-   oe_runmake
-}
-
-FILES_${PN} = "/opt/rs9113 ${sbindir} ${sysconfdir}"
-FILES_${PN}-dbg = "/opt/rs9113/.debug/"
-
-PARALLEL_MAKE = ""
-
-do_install() {
-   install -m 0755 -d ${D}/opt/rs9113
-   install -d ${D}${sysconfdir}/init.d/
-   install -d ${D}${sysconfdir}/default/
-   cp -r ${S}/release/* ${D}/opt/rs9113/
-
-   install -m 0755 -d ${D}${sbindir}
-   install -m 0755 ${WORKDIR}/rs9113_load_modules.sh ${D}${sbindir}/
-   install -m 0755 ${WORKDIR}/rs9113_remove_modules.sh ${D}${sbindir}/
-   install -m 0755 ${WORKDIR}/rs9113.init ${D}${sysconfdir}/init.d/rs9113
-   install -m 0644 ${WORKDIR}/rs9113.default ${D}${sysconfdir}/default/rs9113
-}
-
-python do_clean() {
-    bb.note("Skipping clean in rs9113 recipe.")
-}