Moved to gitlab.

5 files changed, 0 insertions, 279 deletions

diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/kthread.patch b/recipes-kernel/rs9113/rs9113-1.3.0/kthread.patch
deleted file mode 100644
index 485d0ff..0000000
--- a/recipes-kernel/rs9113/rs9113-1.3.0/kthread.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-diff -rupN host/common_hal/osd/linux/onebox_thread.c host_new/common_hal/osd/linux/onebox_thread.c

---- host/common_hal/osd/linux/onebox_thread.c	2016-03-02 14:58:53.962962812 +0530

-+++ host_new/common_hal/osd/linux/onebox_thread.c	2016-03-02 14:54:04.111702855 +0530

-@@ -99,11 +99,12 @@ int kill_thread(onebox_thread_handle_t *

- 	atomic_inc(&handle->thread_done);

- 	ONEBOX_DEBUG(ONEBOX_ZONE_INFO,(TEXT("In %s Before setting event\n"),__func__));

- 	rsi_set_event(&handle->thread_event);

--	wait_for_completion(&handle->thread_complete);

-+	//wait_for_completion(&handle->thread_complete);

- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)

- 	//handle->thread_id = NULL;

- 	kthread_stop(handle->thread_id);

- #else

-+	wait_for_completion(&handle->thread_complete);

- 	handle->thread_id = 0;

- #endif

- #endif

-diff -rupN host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c host_new/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c

---- host/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c	2016-03-02 14:58:53.956962786 +0530

-+++ host_new/wlan/wlan_hal/osd_wlan/linux/onebox_wlan_osd_ops.c	2016-03-02 14:52:32.287303701 +0530

-@@ -244,11 +244,12 @@ int kill_wlan_thread(WLAN_ADAPTER w_adap

- 	atomic_inc(&w_adapter->txThreadDone);

- 	ONEBOX_DEBUG(ONEBOX_ZONE_INFO,(TEXT("In %s Before setting event\n"),__func__));

- 	os_intf_ops->onebox_set_event(&(w_adapter->sdio_scheduler_event));

--	wait_for_completion(&w_adapter->txThreadComplete);

-+	//wait_for_completion(&w_adapter->txThreadComplete);

- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)

- 		//handle->thread_id = NULL;

- 		kthread_stop(handle->thread_id);

- #else

-+	wait_for_completion(&w_adapter->txThreadComplete);

- 		handle->thread_id = 0;

- #endif

- 	return ONEBOX_STATUS_SUCCESS;

diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/mtcdt/defconfig b/recipes-kernel/rs9113/rs9113-1.3.0/mtcdt/defconfig
deleted file mode 100644
index e8dd6a7..0000000
--- a/recipes-kernel/rs9113/rs9113-1.3.0/mtcdt/defconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Automatically generated by make menuconfig: don't edit
-#
-# CONFIG_SDIO is not set
-CONFIG_USB=y
-CONFIG_LINUX=y
-# CONFIG_ANDROID is not set
-ONEBOX_CONFIG_NL80211=y
-# HOSTAPD_SUPPORT is not set
-ENABLE_WLAN=y
-ENABLE_BT=y
-# ENABLE_ZIGB is not set
-ONEBOX_DEBUG_ENABLE=y
-# RSI_SDIO_MULTI_BLOCK_SUPPORT is not set
diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_load_modules.sh b/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_load_modules.sh
deleted file mode 100755
index 0a16db0..0000000
--- a/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_load_modules.sh
+++ /dev/null
@@ -1,153 +0,0 @@
-#!/bin/bash
-
-if [ $# -ne 1 ]; then
-	echo "Usage: $(basename $0) COEX_MODE"
-	echo ""
-	echo "COEX_MODE options:
-		1    WLAN STATION /WIFI-Direct/WLAN PER
-		2    WLAN ACCESS POINT(including muliple APs on different vaps)
-		3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
-
-		4    BT CLASSIC MODE/BT CLASSIC PER MODE
-		5    WLAN STATION + BT CLASSIC MODE
-		6    WLAN ACCESS POINT + BT CLASSIC MODE
-		8    BT LE MODE /BT LE PER MODE
-		9    WLAN STATION + BT LE MODE
-		12   BT CLASSIC + BT LE MODE 							
-		14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
-		"
-	exit 1
-fi
-
-COEX_MODE=$1
-
-cd /opt/rs9113
-
-modprobe mac80211
-modprobe bluetooth
-
-insmod onebox_common_gpl.ko
-
-insmod wlan.ko
-insmod wlan_wep.ko
-insmod wlan_tkip.ko
-insmod wlan_ccmp.ko
-insmod wlan_acl.ko
-insmod wlan_xauth.ko
-insmod wlan_scan_sta.ko
-insmod onebox_wlan_nongpl.ko
-insmod onebox_wlan_gpl.ko
-
-#Power_mode type
-# 0 - HIGH  POWER MODE
-# 1 - MEDIUM POWER MODE 
-# 2 - LOW POWER MODE
-BT_RF_TX_POWER_MODE=0
-BT_RF_RX_POWER_MODE=0
-
-PARAMS=$PARAMS" bt_rf_tx_power_mode=$BT_RF_TX_POWER_MODE"
-PARAMS=$PARAMS" bt_rf_rx_power_mode=$BT_RF_RX_POWER_MODE"
-
-insmod onebox_bt_nongpl.ko $PARAMS 
-insmod onebox_bt_gpl.ko
-
-#Driver Mode 1 END-TO-END mode, 
-#            2 RF Evaluation Mode
-
-DRIVER_MODE=1
-
-# COEX MODE:                  
-#							1    WLAN STATION /WIFI-Direct/WLAN PER
-#							2    WLAN ACCESS POINT(including muliple APs on different vaps)
-#							3    WLAN ACCESS POINT + STATION MODE(on multiple vaps)
-
-#							4    BT CLASSIC MODE/BT CLASSIC PER MODE
-#							5    WLAN STATION + BT CLASSIC MODE
-#							6    WLAN ACCESS POINT + BT CLASSIC MODE
-#							8    BT LE MODE /BT LE PER MODE
-#							9    WLAN STATION + BT LE MODE
-#							12   BT CLASSIC + BT LE MODE 							
-#							14   WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
-
-#							16   ZIGBEE MODE/ ZIGBEE PER MODE
-#							17   WLAN STATION + ZIGBEE
-
-#COEX_MODE=3
-
-#To enable TA-level SDIO aggregation set 1 else set 0 to disable it.
-TA_AGGR=4
-
-#Disable Firmware load set 1 to skip FW loading through Driver else set to 0.
-SKIP_FW_LOAD=0
-
-#FW Download Mode	
-#	1 - Full Flash mode with Secondary Boot Loader
-#	2 - Full RAM mode with Secondary Boot Loader
-#	3 - Flash + RAM mode with Secondary Boot Loader
-#	4 - Firmware loading WITHOUT Secondary Boot Loader
-# Recommended to use the default mode 1
-FW_LOAD_MODE=1
-
-#ps_handshake_mode
-#   1 - No hand shake Mode
-#	2 - Packet hand shake Mode
-#	3 - GPIO Hand shake Mode
-###########Default is Packet handshake mode=2
-HANDSHAKE_MODE=2
-
-#SDIO Clock speed
-SDIO_CLOCK_SPEED=50000
-
-#Antenna diversity enable
-RSI_ANTENNA_DIVERSITY=0
-
-#Antenna Selection
-ANT_SEL_VAL=2         # 2 Internal Antenna Selection
-											# 3 External Antenna Selection
-
-####RF_POWER_MODE Selection
-
-# 0x00 For Both TX and RX High Power 
-# 0x11 For Both TX and RX Medium Power
-# 0x22 For Both TX and RX LOW Power
-
-# 0x10 For High Power TX and Medium RX Power
-# 0x20 For High Power TX and LOW RX Power
-
-# 0x01 For Medium TX and RX High Power
-# 0x21 For Medium Power TX and LOW RX Power
-
-# 0x02 For Low Power TX and RX High Power 
-# 0x12 For LOW Power TX and Medium RX Power
-
-
-WLAN_RF_PWR_MODE=0x00
-BT_RF_PWR_MODE=0x00
-ZIGB_RF_PWR_MODE=0x00
-
-#COUNTRY Selection
-# 0 World Domain
-# 840 US Domain Maps to US Region
-# 276 Germany Maps to EU Region
-# 392 Japan Maps to Japan Region
-SET_COUNTRY_CODE=0  
-
-PARAMS=" driver_mode=$DRIVER_MODE"
-PARAMS=$PARAMS" firmware_path=/opt/rs9113/firmware/"
-PARAMS=$PARAMS" onebox_zone_enabled=0x1"
-PARAMS=$PARAMS" ta_aggr=$TA_AGGR"
-PARAMS=$PARAMS" skip_fw_load=$SKIP_FW_LOAD"
-PARAMS=$PARAMS" fw_load_mode=$FW_LOAD_MODE"
-PARAMS=$PARAMS" sdio_clock=$SDIO_CLOCK_SPEED"
-PARAMS=$PARAMS" enable_antenna_diversity=$RSI_ANTENNA_DIVERSITY"
-PARAMS=$PARAMS" coex_mode=$COEX_MODE"
-#PARAMS=$PARAMS" ps_handshake_mode=$HANDSHAKE_MODE"
-PARAMS=$PARAMS" obm_ant_sel_val=$ANT_SEL_VAL"
-PARAMS=$PARAMS" wlan_rf_power_mode=$WLAN_RF_PWR_MODE"
-PARAMS=$PARAMS" bt_rf_power_mode=$BT_RF_PWR_MODE"
-PARAMS=$PARAMS" zigb_rf_power_mode=$ZIGB_RF_PWR_MODE"
-PARAMS=$PARAMS" country_code=$SET_COUNTRY_CODE"
-
-insmod onebox_nongpl.ko	$PARAMS
-insmod onebox_gpl.ko
-
diff --git a/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh b/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh
deleted file mode 100755
index bcd885a..0000000
--- a/recipes-kernel/rs9113/rs9113-1.3.0/rs9113_remove_modules.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-killall -9 wpa_supplicant
-killall -9 hostapd
-rm -rf /var/run/wpa_supplicant/
-sleep 2
-
-### COMMON HAL MODULES 
-rmmod onebox_gpl.ko
-rmmod onebox_nongpl.ko
-
-###WLAN MODULES
-rmmod onebox_wlan_gpl.ko
-rmmod onebox_wlan_nongpl.ko
-rmmod wlan_scan_sta.ko
-rmmod wlan_xauth.ko
-rmmod wlan_acl.ko
-rmmod wlan_tkip.ko
-rmmod wlan_ccmp.ko
-rmmod wlan_wep.ko
-rmmod wlan.ko
-
-###BT MODULES
-rmmod onebox_bt_gpl.ko
-rmmod onebox_bt_nongpl.ko
-
-###ZIGB MODULES
-#rmmod onebox_zigb_gpl.ko
-#rmmod onebox_zigb_nongpl.ko
-
-rmmod onebox_common_gpl.ko
diff --git a/recipes-kernel/rs9113/rs9113_1.3.0.bb b/recipes-kernel/rs9113/rs9113_1.3.0.bb
deleted file mode 100644
index be52385..0000000
--- a/recipes-kernel/rs9113/rs9113_1.3.0.bb
+++ /dev/null
@@ -1,49 +0,0 @@
-DESCRIPTION = "USB Driver for Redpine RS9113"
-SECTION = "base"
-PRIORITY = "optional"
-LICENSE = "Proprietary"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
-
-SRC_URI = " \
-    file://RS9113.NBZ.NL.GENR.LNX.1.3.0.tgz \
-    file://kthread.patch \
-    file://defconfig \
-    file://rs9113_load_modules.sh \
-    file://rs9113_remove_modules.sh \
-    file://rs9113.init \
-"
-
-S = "${WORKDIR}/RS9113.NBZ.NL.GENR.LNX.1.3.0/source/host"
-
-EXTRA_OEMAKE = " KERNELDIR=${STAGING_KERNEL_DIR} \
-                 CROSS_COMPILE=${TARGET_PREFIX} \
-                 ARCH=arm \
-                 WLAN_COMPILE_FLAGS='' \
-                "
-
-do_configure() {
-   cp ${WORKDIR}/defconfig .config
-}
-
-do_compile () {
-   unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
-   oe_runmake
-}
-
-FILES_${PN} = "/opt/rs9113 ${sbindir}"
-FILES_${PN}-dbg = "/opt/rs9113/.debug/"
-
-PARALLEL_MAKE = ""
-
-do_install() {
-   install -m 0755 -d ${D}/opt/rs9113
-   cp -r ${S}/release/* ${D}/opt/rs9113/
-
-   install -m 0755 -d ${D}${sbindir}
-   install -m 0755 ${WORKDIR}/rs9113_load_modules.sh ${D}${sbindir}/
-   install -m 0755 ${WORKDIR}/rs9113_remove_modules.sh ${D}${sbindir}/
-}
-
-python do_clean() {
-    bb.note("Skipping clean in rs9113 recipe.")
-}