Add mtr stuff to mLinux

25 files changed, 8164 insertions, 2 deletions

diff --git a/conf/machine/mtr.conf b/conf/machine/mtr.conf
new file mode 100644
index 0000000..eeb016b
--- /dev/null
+++ b/conf/machine/mtr.conf
@@ -0,0 +1,46 @@
+#@TYPE: Machine
+#@Name: Multi-Tech MTCDT
+#@DESCRIPTION: Machine configuration for the MTR hardware
+
+require conf/machine/include/tune-arm926ejs.inc
+
+MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp"
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux = "3.12.%"
+
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "kernel-module-vizzini"
+PREFERRED_VERSION_kernel-module-vizzini ?= "1.1"
+
+DEFAULTTUNE = "arm926ejs"
+TUNE_CCARGS = " -march=armv5te -marm -mthumb-interwork -mtune=arm926ej-s"
+TUNE_FEATURES = "arm armv5 thumb dsp arm926ejs"
+ARMPKGSFX_THUMB="t"
+
+# used by sysvinit_2
+SERIAL_CONSOLES = "115200;ttyS0"
+#don't try to access tty1
+USE_VT = "0"
+
+UBOOT_MACHINE = "at91sam9x5ek_nandflash_config"
+PREFERRED_VERSION_u-boot = "2016.09.01"
+
+AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot"
+PREFERRED_VERSION_at91bootstrap = "3.5.3"
+
+KERNEL_IMAGETYPE = "uImage"
+# remove kernel-image from rootfs by overriding kernel-base DEPS
+RDEPENDS_kernel-base = ""
+
+EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
+
+IMAGE_FSTYPES =+ "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n"
+
+UBOOT_ENTRYPOINT = "0x20008000"
+UBOOT_LOADADDRESS = "0x20008000"
+
+PREFERRED_VERSION_rs9113 = '1.5.5'
+
+PRINC ?= "0"
+
+PACKAGECONFIG_append_pn-boost = " python"
diff --git a/conf/machine/mtrv1.conf b/conf/machine/mtrv1.conf
new file mode 100644
index 0000000..6098699
--- /dev/null
+++ b/conf/machine/mtrv1.conf
@@ -0,0 +1,46 @@
+#@TYPE: Machine
+#@Name: Multi-Tech MTCDT
+#@DESCRIPTION: Machine configuration for the MTRv1 hardware
+
+require conf/machine/include/tune-arm926ejs.inc
+
+MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp"
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux = "3.12.%"
+
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "kernel-module-vizzini"
+PREFERRED_VERSION_kernel-module-vizzini ?= "1.1"
+
+DEFAULTTUNE = "arm926ejs"
+TUNE_CCARGS = " -march=armv5te -marm -mthumb-interwork -mtune=arm926ej-s"
+TUNE_FEATURES = "arm armv5 thumb dsp arm926ejs"
+ARMPKGSFX_THUMB="t"
+
+# used by sysvinit_2
+SERIAL_CONSOLES = "115200;ttyS0"
+#don't try to access tty1
+USE_VT = "0"
+
+UBOOT_MACHINE = "at91sam9x5ek_nandflash_config"
+PREFERRED_VERSION_u-boot = "2016.09.01"
+
+AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot"
+PREFERRED_VERSION_at91bootstrap = "3.5.3"
+
+KERNEL_IMAGETYPE = "uImage"
+# remove kernel-image from rootfs by overriding kernel-base DEPS
+RDEPENDS_kernel-base = ""
+
+EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
+
+IMAGE_FSTYPES =+ "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n"
+
+UBOOT_ENTRYPOINT = "0x20008000"
+UBOOT_LOADADDRESS = "0x20008000"
+
+PREFERRED_VERSION_rs9113 = '1.5.5'
+
+PRINC ?= "0"
+
+PACKAGECONFIG_append_pn-boost = " python"
diff --git a/contrib/uboot-setenv-mtr.minicom b/contrib/uboot-setenv-mtr.minicom
new file mode 100644
index 0000000..bc53396
--- /dev/null
+++ b/contrib/uboot-setenv-mtr.minicom
@@ -0,0 +1,60 @@
+print setting U-Boot variables...
+send setenv bootargs              \'mem=128M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2\'
+send setenv bootcmd               \'nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}\'
+send setenv bootdelay             1
+send setenv serverip              192.168.2.2
+send setenv ipaddr                192.168.2.1
+send setenv netmask               255.255.255.0
+send setenv loadaddr              0x22000000
+send setenv stdin                 serial
+send setenv stdout                serial
+send setenv stderr                serial
+send setenv ethact                macb0
+send setenv ethaddr               00:08:00:87:00:02
+send setenv mtdids                nand0=nand0
+send setenv mtdparts              mtdparts=nand0:256k(bootstrap),512k(u-boot),640k(u-boot-env1),640k(u-boot-env2),6M(kernel),8M(config),8M(oem),-(rootfs)
+send setenv bootstrap_file        oe_bootstrap_pmecc_padded.bin
+send setenv uboot_file            oe_u-boot.bin
+send setenv uboot_env1_file       oe_uboot_env1.bin
+send setenv uboot_env2_file       oe_uboot_env2.bin
+send setenv kernel_file           oe_uImage.bin
+send setenv config_file           oe_config.tar.gz
+send setenv oem_file              oe_oem.tar.gz
+send setenv rootfs_file           oe_rootfs.jffs2
+send setenv bootstrap_addr        0x00000000
+send setenv uboot_addr            0x00040000
+send setenv uboot_env1_addr       0x000C0000
+send setenv uboot_env2_addr       0x00160000
+send setenv kernel_addr           0x00200000
+send setenv config_addr           0x00800000
+send setenv oem_addr              0x01000000
+send setenv rootfs_addr           0x01800000
+send setenv bootstrap_size        0x00040000
+send setenv uboot_size            0x00080000
+send setenv uboot_env1_size       0x000A0000
+send setenv uboot_env2_size       0x000A0000
+send setenv kernel_size           0x00600000
+send setenv config_size           0x00800000
+send setenv oem_size              0x00800000
+send setenv erase_bootstrap       \'nand erase.part bootstrap\'
+send setenv erase_uboot           \'nand erase.part u-boot\'
+send setenv erase_uboot_env1      \'nand erase.part u-boot-env1\'
+send setenv erase_uboot_env2      \'nand erase.part u-boot-env2\'
+send setenv erase_kernel          \'nand erase.part kernel\'
+send setenv erase_config          \'nand erase.part config\'
+send setenv erase_oem             \'nand erase.part oem\'
+send setenv erase_rootfs          \'nand erase.part rootfs\'
+send setenv tftp_bootstrap        \'tftpboot ${loadaddr} ${bootstrap_file} && run erase_bootstrap && nand write.jffs2 ${fileaddr} bootstrap ${filesize}\'
+send setenv tftp_uboot            \'tftpboot ${loadaddr} ${uboot_file} && run erase_uboot && nand write.jffs2 ${fileaddr} u-boot ${filesize}\'
+send setenv tftp_uboot_env1       \'tftpboot ${loadaddr} ${uboot_env1_file} && run erase_uboot_env1 && nand write.jffs2 ${fileaddr} u-boot-env1 ${filesize}\'
+send setenv tftp_uboot_env2       \'tftpboot ${loadaddr} ${uboot_env2_file} && run erase_uboot_env2 && nand write.jffs2 ${fileaddr} u-boot-env2 ${filesize}\'
+send setenv tftp_kernel           \'tftpboot ${loadaddr} ${kernel_file} && run erase_kernel && nand write.jffs2 ${fileaddr} kernel ${filesize}\'
+send setenv tftp_config           \'tftpboot ${loadaddr} ${config_file} && run erase_config && nand write.jffs2 ${fileaddr} config ${filesize}\'
+send setenv tftp_oem              \'tftpboot ${loadaddr} ${oem_file} && run erase_oem && nand write.jffs2 ${fileaddr} oem ${filesize}\'
+send setenv tftp_rootfs           \'tftpboot ${loadaddr} ${rootfs_file} && run erase_rootfs && nand write.jffs2 ${fileaddr} rootfs ${filesize}\'
+send setenv krb                   \'run tftp_kernel && run tftp_rootfs && boot\'
+send setenv rb                    \'run tftp_rootfs && boot\'
+print saving...
+send saveenv
+send saveenv
+send printenv
diff --git a/contrib/uboot-setenv-mtrv1.minicom b/contrib/uboot-setenv-mtrv1.minicom
new file mode 100644
index 0000000..bc53396
--- /dev/null
+++ b/contrib/uboot-setenv-mtrv1.minicom
@@ -0,0 +1,60 @@
+print setting U-Boot variables...
+send setenv bootargs              \'mem=128M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2\'
+send setenv bootcmd               \'nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}\'
+send setenv bootdelay             1
+send setenv serverip              192.168.2.2
+send setenv ipaddr                192.168.2.1
+send setenv netmask               255.255.255.0
+send setenv loadaddr              0x22000000
+send setenv stdin                 serial
+send setenv stdout                serial
+send setenv stderr                serial
+send setenv ethact                macb0
+send setenv ethaddr               00:08:00:87:00:02
+send setenv mtdids                nand0=nand0
+send setenv mtdparts              mtdparts=nand0:256k(bootstrap),512k(u-boot),640k(u-boot-env1),640k(u-boot-env2),6M(kernel),8M(config),8M(oem),-(rootfs)
+send setenv bootstrap_file        oe_bootstrap_pmecc_padded.bin
+send setenv uboot_file            oe_u-boot.bin
+send setenv uboot_env1_file       oe_uboot_env1.bin
+send setenv uboot_env2_file       oe_uboot_env2.bin
+send setenv kernel_file           oe_uImage.bin
+send setenv config_file           oe_config.tar.gz
+send setenv oem_file              oe_oem.tar.gz
+send setenv rootfs_file           oe_rootfs.jffs2
+send setenv bootstrap_addr        0x00000000
+send setenv uboot_addr            0x00040000
+send setenv uboot_env1_addr       0x000C0000
+send setenv uboot_env2_addr       0x00160000
+send setenv kernel_addr           0x00200000
+send setenv config_addr           0x00800000
+send setenv oem_addr              0x01000000
+send setenv rootfs_addr           0x01800000
+send setenv bootstrap_size        0x00040000
+send setenv uboot_size            0x00080000
+send setenv uboot_env1_size       0x000A0000
+send setenv uboot_env2_size       0x000A0000
+send setenv kernel_size           0x00600000
+send setenv config_size           0x00800000
+send setenv oem_size              0x00800000
+send setenv erase_bootstrap       \'nand erase.part bootstrap\'
+send setenv erase_uboot           \'nand erase.part u-boot\'
+send setenv erase_uboot_env1      \'nand erase.part u-boot-env1\'
+send setenv erase_uboot_env2      \'nand erase.part u-boot-env2\'
+send setenv erase_kernel          \'nand erase.part kernel\'
+send setenv erase_config          \'nand erase.part config\'
+send setenv erase_oem             \'nand erase.part oem\'
+send setenv erase_rootfs          \'nand erase.part rootfs\'
+send setenv tftp_bootstrap        \'tftpboot ${loadaddr} ${bootstrap_file} && run erase_bootstrap && nand write.jffs2 ${fileaddr} bootstrap ${filesize}\'
+send setenv tftp_uboot            \'tftpboot ${loadaddr} ${uboot_file} && run erase_uboot && nand write.jffs2 ${fileaddr} u-boot ${filesize}\'
+send setenv tftp_uboot_env1       \'tftpboot ${loadaddr} ${uboot_env1_file} && run erase_uboot_env1 && nand write.jffs2 ${fileaddr} u-boot-env1 ${filesize}\'
+send setenv tftp_uboot_env2       \'tftpboot ${loadaddr} ${uboot_env2_file} && run erase_uboot_env2 && nand write.jffs2 ${fileaddr} u-boot-env2 ${filesize}\'
+send setenv tftp_kernel           \'tftpboot ${loadaddr} ${kernel_file} && run erase_kernel && nand write.jffs2 ${fileaddr} kernel ${filesize}\'
+send setenv tftp_config           \'tftpboot ${loadaddr} ${config_file} && run erase_config && nand write.jffs2 ${fileaddr} config ${filesize}\'
+send setenv tftp_oem              \'tftpboot ${loadaddr} ${oem_file} && run erase_oem && nand write.jffs2 ${fileaddr} oem ${filesize}\'
+send setenv tftp_rootfs           \'tftpboot ${loadaddr} ${rootfs_file} && run erase_rootfs && nand write.jffs2 ${fileaddr} rootfs ${filesize}\'
+send setenv krb                   \'run tftp_kernel && run tftp_rootfs && boot\'
+send setenv rb                    \'run tftp_rootfs && boot\'
+print saving...
+send saveenv
+send saveenv
+send printenv
diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch
new file mode 100644
index 0000000..313bd91
--- /dev/null
+++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtr.patch
@@ -0,0 +1,60 @@
+Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig
+===================================================================
+--- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-04-11 05:07:35.000000000 -0500
++++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-04-29 15:13:01.390913836 -0500
+@@ -42,7 +42,8 @@
+ ALLOW_PIO3=y
+ CONFIG_HAS_PIO3=y
+ CPU_HAS_PMECC=y
+-CONFIG_LOAD_ONE_WIRE=y
++# MTS: don't load one wire
++# CONFIG_LOAD_ONE_WIRE is not set
+ # CONFIG_MMC_SUPPORT is not set
+ 
+ #
+@@ -81,8 +82,8 @@
+ #
+ # PMECC Configuration
+ #
+-CONFIG_PMECC_CORRECT_BITS_2=y
+-# CONFIG_PMECC_CORRECT_BITS_4 is not set
++# CONFIG_PMECC_CORRECT_BITS_2 is not set
++CONFIG_PMECC_CORRECT_BITS_4=y
+ # CONFIG_PMECC_CORRECT_BITS_8 is not set
+ # CONFIG_PMECC_CORRECT_BITS_12 is not set
+ # CONFIG_PMECC_CORRECT_BITS_24 is not set
+@@ -116,4 +117,5 @@
+ # CONFIG_USER_HW_INIT is not set
+ CONFIG_THUMB=y
+ CONFIG_SCLK=y
+-CONFIG_DISABLE_WATCHDOG=y
++# MTS: don't disable watchdog
++# CONFIG_DISABLE_WATCHDOG is not set
+Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c
+===================================================================
+--- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5ek.c	2013-04-11 05:07:35.000000000 -0500
++++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c	2013-04-29 15:14:44.578915819 -0500
+@@ -312,10 +312,8 @@
+ 
+ 	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
+ 	reg |= AT91C_EBI_CS3A_SM;
+-	if (get_cm_rev() == 'A')
+-		reg &= ~AT91C_EBI_NFD0_ON_D16;
+-	else
+-		reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
++	/* MTR */
++	reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
+ 
+ 	reg &= ~AT91C_EBI_DRV;
+ 	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);
+@@ -345,9 +343,7 @@
+ 		AT91C_BASE_SMC + SMC_CTRL3);
+ 
+ 	/* Configure the PIO controller */
+-	if (get_cm_rev() == 'A')
+-		pio_configure(nand_pins_lo);
+-	else
++	/* MTR2 */
+ 		pio_configure(nand_pins_hi);
+ 
+ 	writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC));
diff --git a/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch
new file mode 100644
index 0000000..912a891
--- /dev/null
+++ b/recipes-bsp/at91bootstrap/at91bootstrap-3.5.3/at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch
@@ -0,0 +1,34 @@
+Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c
+===================================================================
+--- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5ek.c	2015-09-29 09:55:07.335113881 -0500
++++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c	2015-09-29 10:13:19.397489104 -0500
+@@ -81,7 +81,8 @@
+ 			| AT91C_DDRC2_CAS_3              /* CAS Latency 3 */
+ 			| AT91C_DDRC2_NB_BANKS_8         /* 8 banks */
+ 			| AT91C_DDRC2_DLL_RESET_DISABLED /* DLL not reset */
+-			| AT91C_DDRC2_DECOD_INTERLEAVED);/*Interleaved decode*/
++			| AT91C_DDRC2_DIC_DS		 /* Low DDR Drive Strength */
++			| AT91C_DDRC2_DECOD_INTERLEAVED);/* Interleaved decode*/
+ 
+ 	/*
+ 	 * Make sure to uncomment the following line if the DDR controller
+Index: at91bootstrap-3.5.3/main.c
+===================================================================
+--- at91bootstrap-3.5.3.orig/main.c	2013-04-11 05:07:35.000000000 -0500
++++ at91bootstrap-3.5.3/main.c	2015-09-29 10:10:21.354971492 -0500
+@@ -68,12 +68,15 @@
+ {
+ 	char *version = "AT91Bootstrap";
+ 	char *ver_num = " "AT91BOOTSTRAP_VERSION" ("COMPILE_TIME")";
++	char *feature = "DDR Drive Strength: low";
+ 
+ 	dbgu_print("\n\r");
+ 	dbgu_print("\n\r");
+ 	dbgu_print(version);
+ 	dbgu_print(ver_num);
+ 	dbgu_print("\n\r");
++	dbgu_print(feature);
++	dbgu_print("\n\r");
+ 	dbgu_print("\n\r");
+ }
+ 
diff --git a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb b/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb
index 2e5f086..66d28cb 100644
--- a/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb
+++ b/recipes-bsp/at91bootstrap/at91bootstrap_3.5.3.bb
@@ -16,6 +16,10 @@ S = "${WORKDIR}/git"
 
 SRC_URI_append_mtcdt = " file://at91bootstrap-3.5.3-mtcdt.patch "
 SRC_URI_append_mtcap = " file://at91bootstrap-3.5.3-mtcdt.patch "
+SRC_URI_append_mtr = " file://at91bootstrap-3.5.3-mtr.patch"
+SRC_URI_append_mtrv1 = " file://at91bootstrap-3.5.3-mtr.patch \
+                         file://at91bootstrap-3.5.3-mtrv1-DDRlowDriveStrength.patch \
+"
 
 # generate a bootstrap file padded with the header needed for 4-bit PMECC
 # The padded file can be flashed via u-boot without any need to set the PMECC header using SAM-BA
diff --git a/recipes-bsp/multitech/mts-io/mts-io.init b/recipes-bsp/multitech/mts-io/mts-io.init
index aaf4cd4..ee127a5 100644
--- a/recipes-bsp/multitech/mts-io/mts-io.init
+++ b/recipes-bsp/multitech/mts-io/mts-io.init
@@ -196,7 +196,7 @@ set_gpslink() {
         return
     fi
     
-    if [[ ${hw_name} == MTR ]] || [[ ${hw_name} == MTRV1 ]] ; then
+    if [[ ${hw_name} == MTR ]] || [[ ${hw_name} == MTRV1 ]] || [[ ${hw_name} == MTHS ]] ; then
         ln -sf /dev/ttyS1 /dev/gps0
         return
     fi
diff --git a/recipes-bsp/u-boot/u-boot-2016.09.01/mtr.patch b/recipes-bsp/u-boot/u-boot-2016.09.01/mtr.patch
new file mode 100644
index 0000000..3ef68f2
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-2016.09.01/mtr.patch
@@ -0,0 +1,270 @@
+diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+index b0d440d..13cc9a3 100644
+--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
++++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+@@ -44,7 +44,8 @@ static void at91sam9x5ek_nand_hw_init(void)
+ 	csa = readl(&matrix->ebicsa);
+ 	csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ 	/* NAND flash on D16 */
+-	csa |= AT91_MATRIX_NFD0_ON_D16;
++	/* MTR: nand flash is set up by bootstrap, so leave it alone here */
++	/* csa |= AT91_MATRIX_NFD0_ON_D16; */
+ 
+ 	/* Configure IO drive */
+ 	csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
+@@ -256,6 +257,9 @@ int board_early_init_f(void)
+ 
+ int board_init(void)
+ {
++	/* Set Status LED High */
++	at91_set_gpio_output(BOOT_STATUS_LED, 0);
++
+ 	/* arch number of AT91SAM9X5EK-Board */
+ 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
+ 
+@@ -363,3 +367,60 @@ void mem_init(void)
+ 	ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
+ }
+ #endif
++
++/* on-board EEPROM */
++struct mts_id_eeprom_layout {
++    char vendor_id[32];
++    char product_id[32];
++    char device_id[32];
++    char hw_version[32];
++    uint8_t mac_addr[6];
++    char imei[32];
++    uint8_t capa[32];
++    uint8_t mac_bluetooth[6];
++    uint8_t mac_wifi[6];
++    uint8_t reserved[302];
++};
++
++int board_get_enetaddr(uchar *enetaddr)
++{
++	struct mts_id_eeprom_layout eeprom_buffer = {0};
++
++	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, &eeprom_buffer, sizeof(eeprom_buffer))) {
++		printf("EEPROM: read error\n");
++		return 0;
++	}
++
++	if (eeprom_buffer.vendor_id[0] == 0x00 || eeprom_buffer.vendor_id[0] == 0xFF) {
++		printf("EEPROM: uninitialized\n");
++		return 0;
++	}
++
++	printf("vendor-id:  %s\n",  eeprom_buffer.vendor_id);
++	printf("product-id: %s\n", eeprom_buffer.product_id);
++	printf("device-id:  %s\n",  eeprom_buffer.device_id);
++	printf("hw-version: %s\n", eeprom_buffer.hw_version);
++	printf("mac-addr:   %02x:%02x:%02x:%02x:%02x:%02x\n", eeprom_buffer.mac_addr[0],
++		eeprom_buffer.mac_addr[1],
++		eeprom_buffer.mac_addr[2],
++		eeprom_buffer.mac_addr[3],
++		eeprom_buffer.mac_addr[4],
++		eeprom_buffer.mac_addr[5]);
++
++	memcpy(enetaddr, eeprom_buffer.mac_addr, 6);
++
++	return 1;
++}
++
++int misc_init_r(void)
++{
++	uchar enetaddr[6];
++
++	/* set MAC address from EEPROM if read successful */
++	if (board_get_enetaddr(enetaddr)) {
++		eth_setenv_enetaddr("ethaddr", enetaddr);
++	}
++
++	return 0;
++}
++
+diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
+index c276795..9ba415d 100644
+--- a/configs/at91sam9x5ek_nandflash_defconfig
++++ b/configs/at91sam9x5ek_nandflash_defconfig
+@@ -31,4 +31,3 @@ CONFIG_CMD_USB=y
+ CONFIG_CMD_NAND=y
+ CONFIG_CMD_BOOTZ=y
+ CONFIG_CMD_MII=y
+-CONFIG_CMD_I2C=y
+diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
+index 637c403..693feee 100644
+--- a/include/configs/at91sam9x5ek.h
++++ b/include/configs/at91sam9x5ek.h
+@@ -9,8 +9,10 @@
+ #ifndef __CONFIG_H__
+ #define __CONFIG_H__
+ 
++#include <linux/kconfig.h>
+ #include <asm/hardware.h>
+ 
++#define USE_MTR
+ #define CONFIG_SYS_TEXT_BASE		0x26f00000
+ 
+ /* ARM asynchronous clock */
+@@ -26,6 +28,8 @@
+ #define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_DISPLAY_CPUINFO
+ 
++#define CONFIG_MISC_INIT_R       /* enable platform-dependent misc_init_r() */
++
+ /* general purpose I/O */
+ #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
+ #define CONFIG_AT91_GPIO
+@@ -36,6 +40,8 @@
+ #define CONFIG_USART_ID		ATMEL_ID_SYS
+ 
+ /* LCD */
++/* MTR has no LCD */
++#if !defined(MTR)
+ #define CONFIG_LCD
+ #define LCD_BPP			LCD_COLOR16
+ #define LCD_OUTPUT_BPP		24
+@@ -46,7 +52,13 @@
+ #define CONFIG_ATMEL_HLCD
+ #define CONFIG_ATMEL_LCD_RGB565
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV
++#endif  /* !defined(MTR) */
++
++/* check for keypress even if bootdelay is 0 */
++#define CONFIG_ZERO_BOOTDELAY_CHECK
+ 
++/*STATUS LED*/
++#define BOOT_STATUS_LED AT91_PIN_PC21
+ 
+ /*
+  * BOOTP options
+@@ -59,10 +71,7 @@
+ /* no NOR flash */
+ #define CONFIG_SYS_NO_FLASH
+ 
+-/*
+- * Command line configuration.
+- */
+-#define CONFIG_CMD_NAND
++#define CONFIG_SYS_I2C
+ 
+ /*
+  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
+@@ -94,13 +103,30 @@
+ /* our CLE is AD22 */
+ #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+ #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
++/* MTR nand ready is PC31 */
++#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC31
+ 
+ /* PMECC & PMERRLOC */
+ #define CONFIG_ATMEL_NAND_HWECC		1
+ #define CONFIG_ATMEL_NAND_HW_PMECC	1
+-#define CONFIG_PMECC_CAP		2
++
++/* MTR: 4-bit PMECC */
++#define CONFIG_PMECC_CAP		4
+ #define CONFIG_PMECC_SECTOR_SIZE	512
++/* 
++ * CONFIG_PMECC_INDEX_TABLE_OFFSET has been replaced by:
++ *  ATMEL_PMECC_INDEX_OFFSET_512 and
++ *  ATMEL_PMECC_INDEX_OFFSET_1024
++ *
++ * Which as used depends on:
++ * host->pmecc_sector_size == 512
++ *
++ * 2012.10:
++ * #define CONFIG_PMECC_INDEX_TABLE_OFFSET	0x8000
++ * 2016.03 (at91sam9x5.h):
++ * 182:#define ATMEL_PMECC_INDEX_OFFSET_512	0x8000
++ */
++
+ 
+ #define CONFIG_CMD_NAND_TRIMFFS
+ 
+@@ -127,9 +153,11 @@
+ 
+ /* Ethernet */
+ #define CONFIG_MACB
+-#define CONFIG_RMII
++#undef CONFIG_RMII
+ #define CONFIG_NET_RETRY_COUNT		20
+ #define CONFIG_MACB_SEARCH_PHY
++/* enable MII command */
++#define CONFIG_CMD_MII 1
+ 
+ /* USB */
+ #ifdef CONFIG_CMD_USB
+@@ -147,6 +175,22 @@
+ #endif
+ #endif
+ 
++#define CONFIG_SYS_I2C_SOFT
++#define CONFIG_SOFT_I2C
++#define CONFIG_SOFT_I2C_GPIO_SCL AT91_PIN_PA31
++#define CONFIG_SOFT_I2C_GPIO_SDA AT91_PIN_PA30
++#define CONFIG_SYS_I2C_SOFT_SPEED		50000
++#define CONFIG_SYS_I2C_SPEED		CONFIG_SYS_I2C_SOFT_SPEED
++/* Values from previous levels of Conduit U-Boot */
++#define CONFIG_SYS_I2C_SLAVE    0xfe
++#define I2C_RXTX_LEN	128
++
++/* I2C eeprom support */
++#define CONFIG_CMD_EEPROM
++#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56			/* at24c04 */
++#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1		/* Bytes of address<---><------>*/
++#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
++
+ #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
+ 
+ #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+@@ -156,11 +200,11 @@
+ /* bootstrap + u-boot + env + linux in nandflash */
+ #define CONFIG_ENV_IS_IN_NAND
+ #define CONFIG_ENV_OFFSET		0xc0000
+-#define CONFIG_ENV_OFFSET_REDUND	0x100000
++#define CONFIG_ENV_OFFSET_REDUND	0x160000
+ #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+-#define CONFIG_BOOTCOMMAND	"nand read " \
+-				"0x22000000 0x200000 0x300000; " \
+-				"bootm 0x22000000"
++/* MTR: read from env variables for boot */
++#define CONFIG_BOOTCOMMAND "nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}"
++
+ #elif defined(CONFIG_SYS_USE_SPIFLASH)
+ /* bootstrap + u-boot + env + linux in spi flash */
+ #define CONFIG_ENV_IS_IN_SPI_FLASH
+@@ -197,6 +241,9 @@
+ 				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+ 				"root=/dev/mmcblk0p2 " \
+ 				"rw rootfstype=ext4 rootwait"
++#elif defined(USE_MTR)
++/* MTR uses jffs2 */
++#define CONFIG_BOOTARGS        "mem=128M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2"
+ #else
+ #define CONFIG_BOOTARGS							\
+ 	"console=ttyS0,115200 earlyprintk "				\
+@@ -274,4 +321,21 @@
+ 
+ #endif
+ 
++/* MTR defaults */
++#define CONFIG_ENV_OVERWRITE   1 /* Allow Overwrite of serial# & ethaddr */
++#define CONFIG_ETHADDR     00:08:00:87:00:02
++#define CONFIG_IPADDR      192.168.2.1
++#define CONFIG_NETMASK     255.255.255.0
++#define CONFIG_SERVERIP    192.168.2.2
++#define CONFIG_HOSTNAME    AT91SAM9G25
++#define CONFIG_LOADADDR    0x22000000
++
++/* MTR - enable watchdog */
++#define CONFIG_AT91SAM9_WATCHDOG 1
++#define CONFIG_HW_WATCHDOG 1
++#define CONFIG_AT91_HW_WDT_TIMEOUT 16
++#define CONFIG_EXTRA_ENV_SETTINGS          \
++   "kernel_addr=0x200000\0"          \
++   ""
++
+ #endif
diff --git a/recipes-bsp/u-boot/u-boot-2016.09.01/mtrv1.patch b/recipes-bsp/u-boot/u-boot-2016.09.01/mtrv1.patch
new file mode 100644
index 0000000..53b4995
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-2016.09.01/mtrv1.patch
@@ -0,0 +1,259 @@
+diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+index b0d440d..5640cef 100644
+--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
++++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+@@ -44,7 +44,8 @@ static void at91sam9x5ek_nand_hw_init(void)
+ 	csa = readl(&matrix->ebicsa);
+ 	csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ 	/* NAND flash on D16 */
+-	csa |= AT91_MATRIX_NFD0_ON_D16;
++	/* MTR: nand flash is set up by bootstrap, so leave it alone here */
++	/* csa |= AT91_MATRIX_NFD0_ON_D16; */
+ 
+ 	/* Configure IO drive */
+ 	csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
+@@ -256,6 +257,9 @@ int board_early_init_f(void)
+ 
+ int board_init(void)
+ {
++	/* Set Status LED High */
++	at91_set_gpio_output(BOOT_STATUS_LED, 0);
++
+ 	/* arch number of AT91SAM9X5EK-Board */
+ 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
+ 
+@@ -362,4 +366,61 @@ void mem_init(void)
+ 	/* DDRAM2 Controller initialize */
+ 	ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
+ }
++
+ #endif
++
++/* on-board EEPROM */
++struct mts_id_eeprom_layout {
++    char vendor_id[32];
++    char product_id[32];
++    char device_id[32];
++    char hw_version[32];
++    uint8_t mac_addr[6];
++    char imei[32];
++    uint8_t capa[32];
++    uint8_t mac_bluetooth[6];
++    uint8_t mac_wifi[6];
++    uint8_t reserved[302];
++};
++
++int board_get_enetaddr(uchar *enetaddr)
++{
++	struct mts_id_eeprom_layout eeprom_buffer = {0};
++
++	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, &eeprom_buffer, sizeof(eeprom_buffer))) {
++		printf("EEPROM: read error\n");
++		return 0;
++	}
++
++	if (eeprom_buffer.vendor_id[0] == 0x00 || eeprom_buffer.vendor_id[0] == 0xFF) {
++		printf("EEPROM: uninitialized\n");
++		return 0;
++	}
++
++	printf("vendor-id:  %s\n",  eeprom_buffer.vendor_id);
++	printf("product-id: %s\n", eeprom_buffer.product_id);
++	printf("device-id:  %s\n",  eeprom_buffer.device_id);
++	printf("hw-version: %s\n", eeprom_buffer.hw_version);
++	printf("mac-addr:   %02x:%02x:%02x:%02x:%02x:%02x\n", eeprom_buffer.mac_addr[0],
++		eeprom_buffer.mac_addr[1],
++		eeprom_buffer.mac_addr[2],
++		eeprom_buffer.mac_addr[3],
++		eeprom_buffer.mac_addr[4],
++		eeprom_buffer.mac_addr[5]);
++
++	memcpy(enetaddr, eeprom_buffer.mac_addr, 6);
++
++	return 1;
++}
++
++int misc_init_r(void)
++{
++	uchar enetaddr[6];
++
++	/* set MAC address from EEPROM if read successful */
++	if (board_get_enetaddr(enetaddr)) {
++		eth_setenv_enetaddr("ethaddr", enetaddr);
++	}
++
++	return 0;
++}
+diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
+index c276795..9ba415d 100644
+--- a/configs/at91sam9x5ek_nandflash_defconfig
++++ b/configs/at91sam9x5ek_nandflash_defconfig
+@@ -31,4 +31,3 @@ CONFIG_CMD_USB=y
+ CONFIG_CMD_NAND=y
+ CONFIG_CMD_BOOTZ=y
+ CONFIG_CMD_MII=y
+-CONFIG_CMD_I2C=y
+diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
+index 637c403..eff48d6 100644
+--- a/include/configs/at91sam9x5ek.h
++++ b/include/configs/at91sam9x5ek.h
+@@ -9,8 +9,10 @@
+ #ifndef __CONFIG_H__
+ #define __CONFIG_H__
+ 
++#include <linux/kconfig.h>
+ #include <asm/hardware.h>
+ 
++#define USE_MTR
+ #define CONFIG_SYS_TEXT_BASE		0x26f00000
+ 
+ /* ARM asynchronous clock */
+@@