meta-multitech.git, branch 3.0.1

linux-3.12.27: mtcdt: disable ssc0

2015-01-15T21:14:00+00:00

ssc0 is not used and this fixes LED behavior on boot

contrib/uboot-setenv-mtcdt.minicom: set bootargs to mem=256M

2015-01-15T20:49:45+00:00

u-boot-2012.10: mtcdt: update to 256MB RAM

2015-01-13T19:56:35+00:00

at91bootstrap-3.5.3: mtcdt: update to 256MB RAM

2015-01-13T19:56:04+00:00

linux-3.12.27: mtcdt: enable FANOTIFY

2015-01-13T17:42:44+00:00

mtcdt: use mts-io 1.1.0

2015-01-09T23:02:06+00:00

mts-io: update to 1.1.0

2015-01-09T23:01:58+00:00

adds mtac-lora support

linux-3.12.27: add linux-3.12-spi-atmel-dma-min.patch, build spi-atmel as module

2015-01-07T18:32:24+00:00

Forces spi-atmel to always use DMA mode instead of switching between
PIO and DMA depending on the transfer size.  Switching between the two
can cause Rx buffer corruption with the 3.12 driver.

This comes at the cost of lower performance (15 to 20%) for small
transfers (1-15 bytes), but improves reliability for protocols that use small
and large transfers regularly.
For large transfers (1024 bytes), DMA mode is 300% faster than PIO.

https://lkml.org/lkml/2013/10/21/534

linux-3.12.27: mtcdt.dts: fix spi dts

2014-12-12T22:22:21+00:00

linux-3.12.27: mtcdt.dts: update SPI CS pins, add spidev on CS2

2014-12-12T22:15:19+00:00