From 78a78b6b9e275f22b8dcbb0d867b9e1aa173ce9a Mon Sep 17 00:00:00 2001 From: Jeff Hatch Date: Tue, 23 May 2017 14:01:38 -0500 Subject: Set GCCVERSION = 5.4.0, PRINC = 0, and PACHAGECONFIG_append_pn-boost = python --- conf/machine/mtcdt.conf.orig | 46 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 conf/machine/mtcdt.conf.orig (limited to 'conf') diff --git a/conf/machine/mtcdt.conf.orig b/conf/machine/mtcdt.conf.orig new file mode 100644 index 0000000..83a47a4 --- /dev/null +++ b/conf/machine/mtcdt.conf.orig @@ -0,0 +1,46 @@ +#@TYPE: Machine +#@Name: Multi-Tech MTCDT +#@DESCRIPTION: Machine configuration for the MultiConnect Conduit MTCDT hardware + +require conf/machine/include/tune-arm926ejs.inc + +MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp" +PREFERRED_PROVIDER_virtual/kernel = "linux" +PREFERRED_VERSION_linux = "3.12.%" + +MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "kernel-module-vizzini" +PREFERRED_VERSION_kernel-module-vizzini ?= "1.1" + +DEFAULTTUNE = "arm926ejs" +TUNE_CCARGS = " -march=armv5te -marm -mthumb-interwork -mtune=arm926ej-s" +TUNE_FEATURES = "arm armv5 thumb dsp arm926ejs" +ARMPKGSFX_THUMB="t" + +# used by sysvinit_2 +SERIAL_CONSOLES = "115200;ttyS0" +#don't try to access tty1 +USE_VT = "0" + +UBOOT_MACHINE = "at91sam9x5ek_nandflash_config" +PREFERRED_VERSION_u-boot = "2016.09.01" + +AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot" +PREFERRED_VERSION_at91bootstrap = "3.5.3" + +KERNEL_IMAGETYPE = "uImage" +# remove kernel-image from rootfs by overriding kernel-base DEPS +RDEPENDS_kernel-base = "" + +EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot" + +IMAGE_FSTYPES =+ "jffs2 tar.gz" +EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n" + +UBOOT_ENTRYPOINT = "0x20008000" +UBOOT_LOADADDRESS = "0x20008000" + +PREFERRED_VERSION_rs9113 = '1.5.0' + +PRINC ?= "0" + +PACKAGECONFIG_append_pn-boost = " python" -- cgit v1.2.3