meta-multitech-atmel.git - MultiTech BSP Layer for Atmel processors

Age	Commit message (Expand)	Author	Files
2019-08-15	Fix EXAR debug port issue on MTCDT, which caused boot hangs	John Klug	3
2019-07-29	Add linux-4.9-quectel_qmi_wwan_support.patch to linux-at91_4.9.87.bb recipe	Jeff Hatch	1
2019-07-29	Merge branch 'master' of gitlab.multitech.net:mirrors/meta-multitech	Jeff Hatch	2
2019-07-29	Additional updates to qmi for Quectel radio support	Jeff Hatch	1
2019-06-25	btclonly package for rs9113, and mths compatible "machine" for kernel	John Klug	2
2019-06-17	150mS does not work with MTHS, so try 300mS timeout on PMECC	John Klug	2
2019-05-31	Add the xt physdev match module for MTHS	John Klug	1
2019-05-28	Remove vbus-gpio which breaks the USB interface.	John Klug	2
2019-05-24	MTHS hardware version change (no wifi LED)	John Klug	1
2019-05-24	Set output low on the GNSS-RESET line	John Klug	1
2019-05-23	Add support to option driver for Quectel EG95	Jeff Hatch	2
2019-05-23	GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VID	John Klug	6
2019-05-23	New version of MTS-IO for MTQ MTR support.	John Klug	1
2019-05-16	Allow for antenna gain in wf command	John Klug	3
2019-05-10	Remove gitlab from mt-dt-overlay build	John Klug	1
2019-05-10	Everything being done from dtoverlay can be done with bash and existing comma...	John Klug	2
2019-05-10	Move mtac to the meta-multitech repository	John Klug	1
2019-05-10	Switch to mtac-gpiob 1.1.2 on multitech.net	John Klug	1
2019-05-10	Move mts-io to multitech.net	John Klug	1
2019-05-09	Bump the version of rs9113rf	John Klug	1
2019-05-09	Add device type to signal stop.	John Klug	1
2019-05-08	Bump revision of rs9113rf to fix antenna port	John Klug	1
2019-05-08	Wrong antenna port	John Klug	1
2019-05-07	Bump the revision of the kernel for new device tree	John Klug	1
2019-05-07	Remove unused mmc pins, and put in PD14-PD20 in mtrv1	John Klug	1
2019-05-07	rs9113 1.6.1 requires a base_interface name for the transmit command	John Klug	3
2019-04-24	Blacklist mts-io driver so it is not loaded by device tree.	John Klug	2
2019-04-24	Use output-high for MTCDT PD14-PD19 resets	John Klug	1
2019-04-24	Autoload i2c-dev for LoRa users	John Klug	2
2019-04-17	Use Redpine bridge patch	John Klug	2
2019-04-17	Use Redpine bridge patch	John Klug	2
2019-04-16	New bootstrap 3.8.12 with ONFI	John Klug	4
2019-04-16	Move bootstrap to ONFI compatible 3.8.12	John Klug	23
2019-04-15	Reduce the activity on the WIFI-BT RESET (PD14) during at91bootstrap	John Klug	2
2019-04-15	Remove unused mmc1-board	John Klug	1
2019-04-15	Remove garbage from mtcdt bootstrap patch	John Klug	1
2019-04-15	Disable USB, which otherwise will use pins PD18-PD20	John Klug	2
2019-04-05	Syntax error in device tree	John Klug	1
2019-04-05	Missing semicolon in device tree.	John Klug	1
2019-04-05	Typo in name of patch for led brightness	John Klug	3
2019-04-04	Bump the at91bootstrap revision	John Klug	1
2019-04-04	Pin High GPIO pins that overlap with PIOB	John Klug	1
2019-04-04	Pin High GPIO pins that overlap with PIOB	John Klug	1
2019-04-04	Fix LED status on upgrade.	John Klug	2
2019-04-04	Correct the SDIO active pin to PA1, and set deglitch	John Klug	1
2019-03-27	Blink LEDs when kernel loads, not when modules load	John Klug	2
2019-03-25	Bump the version of rs9113 for new firmware and WEP fix.	John Klug	2
2019-03-22	Bump kernel revision for CGROUPS	John Klug	1
2019-03-21	Remove BLK_CGROUP and add PROC_EVENTS, and take the consequences from make me...	John Klug	1
2019-03-21	Make defconfig compatible with make menuconfig again.	John Klug	1