summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2022-01-11Enable XMIT and RCV in all cases when setting RS485 with Atmel serial - ↵Serhii Voloshynov1
adaptation for 5.4 kernel
2022-01-11Enable XMIT and RCV in all cases when setting RS485 with Atmel serialJohn Klug1
2022-01-11Disable CRTSCTS when setting RS485 half duplex to match Vizzini driver - ↵Serhii Voloshynov2
adaptation for 5.4 kernel
2022-01-11Disable CRTSCTS when setting RS485 half duplex to match Vizzini driverJohn Klug2
2022-01-11Make sure mts-io is done loading, make sure loops break outJohn Klug1
2022-01-11Remove i2c debug to prevent new I/O expander debug - kernel 5.4Serhii Voloshynov1
2022-01-11Remove i2c debug to prevent new I/O expander debugJohn Klug1
2022-01-11New rs9113-from-src for building rs9113John Klug1
2022-01-11Wait for USB, not the interrupt pin which is too earlyJohn Klug1
2022-01-11Add a reset loop in case rs9113 does not appear on USB HubJohn Klug2
2022-01-11Fix pincontrol for io controllers, rs9113, usbhub resets - migrate changes ↵Serhii Voloshynov1
for kernel 5.4
2022-01-11Fix pincontrol for io controllers, rs9113, usbhub resetsSerhii Voloshynov4
2021-12-23Merge branch 'ap/MTX-4274' into '6' Jeff Hatch15
mPower R.6.0: Merge all changes from 5.3.6 and 5.3.7 to mPower R.6.0 See merge request !18
2021-11-30Update mtcdt.dts for MTCDT-0.2Andrii Pientsov3
2021-11-22Reserve 5 bit serial for multidrop in Atmel Serial driver. Kernel 5.4.81Andrii Pientsov2
2021-11-22Add PCA953X driver to kernel 5.4.81 for MTCDT-0.2Andrii Pientsov1
2021-11-18Remove patch from recipe that is in meta-rs9113John Klug1
2021-11-18Turn off debug in the RS9113 driver due to too many warningsJohn Klug2
2021-11-18Remove support for IRQ because our I/O expander does not have thisJohn Klug1
2021-11-18Cannot use same stanza names at at91sam9x5cm.dtsi or partition order is ↵John Klug1
incorrect
2021-11-18Device tree updates for MTCDT-0.2 and OverlayJohn Klug4
2021-11-18output-high and output-low are ignored by pinctrl_at91 driverJohn Klug1
2021-11-18Add patch for multidrop serial to match Vizzini driverJohn Klug1
2021-11-18Add dummy regulator to make gpio expander driver happyJohn Klug1
2021-11-18Call the new PCA9557 parts gpio4 and gpio5John Klug1
2021-11-18Print a message to the log when setting multidropJohn Klug1
2021-11-18r15 kernel was not yet released, so use r15John Klug1
2021-11-18Reserve 5 bit serial for multidrop in Atmel Serial driverJohn Klug2
2021-11-18Add new GPIO expanderJohn Klug1
2021-11-18Add PCA953X driver to kernel for MTCDT-0.2John Klug1
2021-11-18Have the Atmel serial driver pick the dma channelJohn Klug1
2021-11-18ttyS4, external serial port, must be by default disabledJohn Klug1
2021-11-18Fix DMA for external serial port on MTRV1-0.4John Klug2
2021-11-18Resets for new GPIO controllersJohn Klug1
2021-11-04Bug fix: softdog was already in linux-at91 recipe for mtcdtHarsh Sharma1
2021-11-03Updated linux5.4 to include spidev by defaultHarsh Sharma1
2021-10-29Revert "Revert "Updated mtcdt.dts to use overlays for installed accessory ↵Jason Reiss1
cards"" This reverts commit 7c89a73ec07f17aa001cef75a47a647ecb9de349.
2021-10-25Revert "Updated mtcdt.dts to use overlays for installed accessory cards"Harsh Sharma1
This reverts commit 696f2e6e975e558e902c0268ad3413c810b4fe3b
2021-10-18set PREFERRED_VERSION_rs9113 to 1.6.5Serhii Voloshynov4
2021-10-12Updated mtcdt.dts to use overlays for installed accessory cardsHarsh Sharma1
2021-10-05Add mtrv1 ttl scriptJohn Klug2
2021-10-05Random MAC for EEPROM not written to yetJohn Klug2
2021-10-05Disable usart3 by default, enable with overlayJohn Klug1
2021-09-10Add DMA to GNSS and External SerialJohn Klug1
2021-09-09mLinux 6 on Yocto DunfellJohn Klug1
2021-09-08Move to Red compatible rs9113 driver 1.6.5John Klug2
2021-09-08Remove complaints about debug file in the rs9113-from-src IPK fileJohn Klug1
2021-09-07Add UART0 & USART3 for MTRV1-0.4John Klug2
2021-09-07Fix device tree for MTRV1-0.4 and bump kernel versionJohn Klug2
2021-07-28udev rules apply to platforms other than Atmel. Moved back to meta-mlinuxJohn Klug7
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-20 20:00:23 +0000