summaryrefslogtreecommitdiff
path: root/recipes-kernel
diff options
context:
space:
mode:
Diffstat (limited to 'recipes-kernel')
-rw-r--r--recipes-kernel/linux/linux-at91-4.9/mtrv1/linux-4.9-mtrv1-device-tree.patch215
1 files changed, 200 insertions, 15 deletions
diff --git a/recipes-kernel/linux/linux-at91-4.9/mtrv1/linux-4.9-mtrv1-device-tree.patch b/recipes-kernel/linux/linux-at91-4.9/mtrv1/linux-4.9-mtrv1-device-tree.patch
index 0f048a5..425c0f3 100644
--- a/recipes-kernel/linux/linux-at91-4.9/mtrv1/linux-4.9-mtrv1-device-tree.patch
+++ b/recipes-kernel/linux/linux-at91-4.9/mtrv1/linux-4.9-mtrv1-device-tree.patch
@@ -1,20 +1,9 @@
-diff -aNru linux-4.9-orig/arch/arm/boot/dts/Makefile linux-4.9/arch/arm/boot/dts/Makefile
---- linux-4.9-orig/arch/arm/boot/dts/Makefile 2018-11-28 17:48:26.197651897 -0600
-+++ linux-4.9/arch/arm/boot/dts/Makefile 2018-11-28 17:49:26.441650114 -0600
-@@ -43,7 +43,8 @@
- at91sam9g25ek.dtb \
- at91sam9g35ek.dtb \
- at91sam9x25ek.dtb \
-- at91sam9x35ek.dtb
-+ at91sam9x35ek.dtb \
-+ mtrv1.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- at91-kizbox2.dtb \
- at91-sama5d2_ptc_ek.dtb \
+Index: linux-4.9/arch/arm/boot/dts/mtcdt.dts
+===================================================================
diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/mtrv1.dts linux-4.9.87/arch/arm/boot/dts/mtrv1.dts
--- linux-4.9.87.orig/arch/arm/boot/dts/mtrv1.dts 1969-12-31 18:00:00.000000000 -0600
-+++ linux-4.9.87/arch/arm/boot/dts/mtrv1.dts 2018-12-17 18:33:03.880973445 -0600
-@@ -0,0 +1,241 @@
++++ linux-4.9.87/arch/arm/boot/dts/mtrv1.dts 2018-12-19 12:09:29.828539068 -0600
+@@ -0,0 +1,242 @@
+/*
+ * DTS file for Multi-Tech Systems MTRv1 Hardware
+ *
@@ -25,6 +14,7 @@ diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/mtrv1.dts linux-4.9.87/arch/arm/b
+
+/dts-v1/;
+#include "at91sam9g25.dtsi"
++#include "at91sam9x5ek.dtsi"
+
+/ {
+ model = "Multi-Tech Systems MTR";
@@ -256,3 +246,198 @@ diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/mtrv1.dts linux-4.9.87/arch/arm/b
+ };
+ };
+};
+Index: linux-4.9/arch/arm/boot/dts/at91sam9x5cm.dtsi
+===================================================================
+diff -aNru linux-4.9-orig/arch/arm/boot/dts/at91sam9x5cm.dtsi linux-4.9/arch/arm/boot/dts/at91sam9x5cm.dtsi
+--- linux-4.9-orig/arch/arm/boot/dts/at91sam9x5cm.dtsi 2018-11-28 18:38:25.509563104 -0600
++++ linux-4.9/arch/arm/boot/dts/at91sam9x5cm.dtsi 2018-11-28 18:39:16.213561602 -0600
+@@ -43,48 +43,8 @@
+ atmel,has-pmecc; /* Enable PMECC */
+ atmel,pmecc-cap = <2>;
+ atmel,pmecc-sector-size = <512>;
+- nand-on-flash-bbt;
++ /* nand-on-flash-bbt; */
+ status = "okay";
+-
+- at91bootstrap@0 {
+- label = "at91bootstrap";
+- reg = <0x0 0x40000>;
+- };
+-
+- uboot@40000 {
+- label = "u-boot";
+- reg = <0x40000 0x80000>;
+- };
+-
+- ubootenv@c0000 {
+- label = "U-Boot Env";
+- reg = <0xc0000 0x140000>;
+- };
+-
+- kernel@200000 {
+- label = "kernel";
+- reg = <0x200000 0x600000>;
+- };
+-
+- rootfs@800000 {
+- label = "rootfs";
+- reg = <0x800000 0x1f800000>;
+- };
+- };
+- };
+-
+- leds {
+- compatible = "gpio-leds";
+-
+- pb18 {
+- label = "pb18";
+- gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+- linux,default-trigger = "heartbeat";
+- };
+-
+- pd21 {
+- label = "pd21";
+- gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+@@ -96,5 +56,4 @@
+ pinctrl-0 = <&pinctrl_1wire_cm>;
+ status = "okay";
+ };
+-
+ };
+Index: linux-4.9/arch/arm/boot/dts/at91sam9x5ek.dtsi
+===================================================================
+diff -aNru linux-4.9-orig/arch/arm/boot/dts/at91sam9x5ek.dtsi linux-4.9/arch/arm/boot/dts/at91sam9x5ek.dtsi
+--- linux-4.9-orig/arch/arm/boot/dts/at91sam9x5ek.dtsi 2018-11-28 17:48:21.157652047 -0600
++++ linux-4.9/arch/arm/boot/dts/at91sam9x5ek.dtsi 2018-11-28 17:49:54.793649275 -0600
+@@ -25,23 +25,11 @@
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
++ /* external micro SD slot */
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+- cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+- };
+- };
+-
+- mmc1: mmc@f000c000 {
+- pinctrl-0 = <
+- &pinctrl_board_mmc1
+- &pinctrl_mmc1_slot0_clk_cmd_dat0
+- &pinctrl_mmc1_slot0_dat1_3>;
+- status = "okay";
+- slot@0 {
+- reg = <0>;
+- bus-width = <4>;
+- cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
++ cd-gpios = <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+@@ -49,7 +37,7 @@
+ status = "okay";
+ };
+
+- usart0: serial@f801c000 {
++ uart0: serial@f8040000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+@@ -58,25 +46,12 @@
+ usb2: gadget@f803c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_board_usb2>;
+- atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+- status = "okay";
+- };
+-
+- i2c0: i2c@f8010000 {
+- status = "okay";
+-
+- wm8731: wm8731@1a {
+- compatible = "wm8731";
+- reg = <0x1a>;
+- };
+- };
+-
+- adc0: adc@f804c000 {
+- atmel,adc-ts-wires = <4>;
+- atmel,adc-ts-pressure-threshold = <10000>;
++ /* atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; mtcdt: no vbus-gpio */
+ status = "okay";
+ };
+
++ /* A/D convertor is unusable on Conduit */
++
+ pinctrl@fffff400 {
+ camera_sensor {
+ pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+@@ -118,7 +93,7 @@
+ };
+
+ spi0: spi@f0000000 {
+- status = "disabled"; /* conflict with mmc1 */
++ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+@@ -131,37 +106,20 @@
+ status = "okay";
+ };
+
+- ssc0: ssc@f0010000 {
+- status = "okay";
+- };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <3>;
+- atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+- &pioD 19 GPIO_ACTIVE_LOW
+- &pioD 20 GPIO_ACTIVE_LOW
+- >;
++ //mtcdt: no vbus-gpio
++ // atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
++ // &pioD 19 GPIO_ACTIVE_LOW
++ // &pioD 20 GPIO_ACTIVE_LOW
++ // >;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+-
+- sound {
+- compatible = "atmel,sam9x5-wm8731-audio";
+-
+- atmel,model = "wm8731 @ AT91SAM9X5EK";
+-
+- atmel,audio-routing =
+- "Headphone Jack", "RHPOUT",
+- "Headphone Jack", "LHPOUT",
+- "LLINEIN", "Line In Jack",
+- "RLINEIN", "Line In Jack";
+-
+- atmel,ssc-controller = <&ssc0>;
+- atmel,audio-codec = <&wm8731>;
+- };
+ };
+diff -aNru linux-4.9-orig/arch/arm/boot/dts/Makefile linux-4.9/arch/arm/boot/dts/Makefile
+--- linux-4.9-orig/arch/arm/boot/dts/Makefile 2018-11-28 17:48:26.197651897 -0600
++++ linux-4.9/arch/arm/boot/dts/Makefile 2018-11-28 17:49:26.441650114 -0600
+@@ -43,7 +43,8 @@
+ at91sam9g25ek.dtb \
+ at91sam9g35ek.dtb \
+ at91sam9x25ek.dtb \
+- at91sam9x35ek.dtb
++ at91sam9x35ek.dtb \
++ mtrv1.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-kizbox2.dtb \
+ at91-sama5d2_ptc_ek.dtb \ \ No newline at end of file
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 08:02:30 +0000