diff options
Diffstat (limited to 'recipes-kernel/rs9113')
32 files changed, 2024 insertions, 0 deletions
diff --git a/recipes-kernel/rs9113/files/immunity/LICENSE.txt b/recipes-kernel/rs9113/files/immunity/LICENSE.txt new file mode 100644 index 0000000..d511905 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/LICENSE.txt @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Lesser General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. diff --git a/recipes-kernel/rs9113/files/immunity/SHA256SUMS b/recipes-kernel/rs9113/files/immunity/SHA256SUMS new file mode 100644 index 0000000..4bddb5a --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/SHA256SUMS @@ -0,0 +1 @@ +f1351700edc2e421210abc8d6efa71bba148b873d4b0f7b95ad0da7cbbdcd357 btfile diff --git a/recipes-kernel/rs9113/files/immunity/bluetoothXfer.sh b/recipes-kernel/rs9113/files/immunity/bluetoothXfer.sh new file mode 100755 index 0000000..66c8663 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/bluetoothXfer.sh @@ -0,0 +1,89 @@ +#!/bin/bash +ADDR=$1 +CHAN=$2 +BTPIDFILE=/opt/immunity/btpid +file=btfile +OFTP=/usr/bin/obexftp +cd /opt/immunity +if ! [[ -r $file ]] ; then + echo "Must have file $file for bluetooth testing." + exit 1 +fi + + +if ! [[ -x $OFTP ]] ; then + echo Need to install $OFTP + exit 1 +fi +while ((${#CHAN} == 0)) ; do + hciconfig hci0 up + scanlist="" + scanlist+=$(hcitool scan) + sleep 2 + scanlist+=$(hcitool scan) + sleep 3 + scanlist+=$(hcitool scan) + echo "hcitool scan result" + echo "${scanlist}" + list=($(echo "${scanlist}" | grep ':' | sed -r -e 's/^[[:space:]]*//' -e 's/[[:space:]].*//' | sort | uniq)) + + ((i=0)) + ((quit=0)) + while((i<${#list[@]})) ; do + # Look for OBEX Object push + echo "Browse list[$i]=${list[$i]}" + ((quit=0)) + ((j=0)) + while : ; do + services=$(sdptool browse ${list[$i]}) + if (($?==0)) ; then + echo Listing services + echo "$services" + ADDR=${list[$i]} + break; + fi + echo "$services" + ((j++)) + if ((j>5)) ; then + echo "Giving up on ${list[$i]}" + ((quit=1)) + break; + fi + sleep 1 + done # Looping while running sdptool + ((i++)) + if((quit)); then + continue + fi + if ((${#services}==0)) ; then + continue; + fi + echo "$services" >/tmp/services.txt + CHAN=$(echo "${services}" | grep -A11 'OBEX Object Push' | grep 'Channel:' | sed 's/[[:space:]]*Channel:[[:space:]]*//') + if ((${#CHAN})) ; then + echo found channel $CHAN + break; + fi # Found a channel + done # Loop through Bluetooth addresses +done # Channel parameter not specified + +if ((${#CHAN} == 0)) ; then + echo Could not find an OBEX Object push service + echo 'please do:' + echo ' bluetoothXfer.sh Address Channel' + exit 1 +fi +echo Copying file $file to Address $ADDR Channel $CHAN repeatedly +((failcnt=0)) +while : ; do + echo $$ >$BTPIDFILE + if time obexftp -SH -b "$ADDR" -B "$CHAN" -U none -p btfile ; then + ((failcnt=0)) + else + ((failcnt++)) + echo Failed to transfer file $failcnt times in a row. + echo -- obexftp -SH -b "$ADDR" -B "$CHAN" -U none -p btfile + sleep 2 + fi +done +exit 0 diff --git a/recipes-kernel/rs9113/files/immunity/conduitr2g.conf b/recipes-kernel/rs9113/files/immunity/conduitr2g.conf new file mode 100644 index 0000000..3c16a13 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/conduitr2g.conf @@ -0,0 +1,15 @@ +# Router says this security as WPA-PSK2 AEP. +# TO find this configuration, I used Ubuntu +# 14.04 with wicd and wicd-curses to +# configure the access point. +ap_scan=1 +ctrl_interface=/var/run/wpa_supplicant +network={ + ssid="CONDUITR2G" + scan_ssid=1 + proto=WPA RSN + key_mgmt=WPA-PSK + pairwise=CCMP TKIP + group=CCMP TKIP + psk="MTC0ndu!t" +} diff --git a/recipes-kernel/rs9113/files/immunity/conduitr5g.conf b/recipes-kernel/rs9113/files/immunity/conduitr5g.conf new file mode 100644 index 0000000..85e3a25 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/conduitr5g.conf @@ -0,0 +1,15 @@ +# Router says this security as WPA-PSK2 AEP. +# TO find this configuration, I used Ubuntu +# 14.04 with wicd and wicd-curses to +# configure the access point. +ap_scan=1 +ctrl_interface=/var/run/wpa_supplicant +network={ + ssid="CONDUITR5G" + scan_ssid=1 + proto=WPA RSN + key_mgmt=WPA-PSK + pairwise=CCMP TKIP + group=CCMP TKIP + psk="MTC0ndu!t" +} diff --git a/recipes-kernel/rs9113/files/immunity/mguest2g.conf b/recipes-kernel/rs9113/files/immunity/mguest2g.conf new file mode 100644 index 0000000..300bcd1 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/mguest2g.conf @@ -0,0 +1,17 @@ +# 2.4 GHz BSSID +# +# Create psk: +# wpa_passphrase SSID Password +# wpa_passphrase Mtech_guest Mtech_guest_password >>/etc/wpa_supplicant/wifitest.conf +# Then edit the file to look like this one. +# +ctrl_interface=/var/run/wpa_supplicant +update_config=1 +fast_reauth=1 +ap_scan=1 + +network={ + bssid=9c:4e:20:c8:ee:91 + ssid="Mtech_guest" + psk=babc4085713f121c819d0da8694184b25f035f890246b195a2d9985c2b383725 +} diff --git a/recipes-kernel/rs9113/files/immunity/mguest5g.conf b/recipes-kernel/rs9113/files/immunity/mguest5g.conf new file mode 100644 index 0000000..efdd259 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/mguest5g.conf @@ -0,0 +1,17 @@ +# 5 GHz BSSID +# +# Create psk: +# wpa_passphrase SSID Password +# wpa_passphrase Mtech_guest Mtech_guest_password >>/etc/wpa_supplicant/wifitest.conf +# Then edit the file to look like this one. +# +ctrl_interface=/var/run/wpa_supplicant +update_config=1 +fast_reauth=1 +ap_scan=1 + +network={ + bssid=9c:4e:20:c8:ee:9e + ssid="Mtech_guest" + psk=babc4085713f121c819d0da8694184b25f035f890246b195a2d9985c2b383725 +} diff --git a/recipes-kernel/rs9113/files/immunity/readme.txt b/recipes-kernel/rs9113/files/immunity/readme.txt new file mode 100644 index 0000000..5dfcfde --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/readme.txt @@ -0,0 +1,53 @@ +For wifi initialization to find the best BSSID's for testing: + /opt/immunity/tworadio.sh wifisetup + +Expect this in the output: + udhcpc (v1.22.1) started + Sending discover... + Sending discover... + Sending discover... + No lease, failing + +After doing wifisetup, it is possible to do a scan. + + iwlist wifi0 scanning + +This produces a list: + wifi0 Scan completed : + Cell 01 - Address: 00:27:0D:8C:57:28 + ESSID:"MTS-IT" + Mode:Master + Frequency:2.412 GHz + Quality:19/80 Signal level=-81 dBm Noise level:0 dBm + Encryption key:on + Bit Rates:5.5 Mb/s; 6 Mb/s; 9 Mb/s; 11 Mb/s; 12 Mb/s + 18 Mb/s; 24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s + IE: IEEE 802.11i/WPA2 Version 1 + Group Cipher : CCMP + Pairwise Ciphers (1) : CCMP + Authentication Suites (1) : PSK + Preauthentication Supported + +Find the ESSID desired, which may have multiple Addresses (BSSID). Also +observe the frequency. Select the BSSID (address) with the highest +"signal level" at the desired "frequency". + +Operation with no parameters: + +Environmental variables: + BTADDR Bluetooth MAC address of remote + BTCHAN Bluetooth Channel of service + WIFIURL WiFi URL of file to retrieve. + WIFIFILE WiFi File name of retrieved file to delete. + WPA_CONFIG Config file for wpa_supplicant. + +None of the parameters above are required. + + BTADDR and BTCHAN are searched, but specifying parameters is faster. + WIFIURL defaults to http://www.multitech.net/mlinux/feeds/3.2/arm926ejste/nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk + WIFIFILE defaults to nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk + WPA_CONFIG defaults to /etc/wpa_supplicant/wifitest.conf + + Two get a specific frequency at Multitech, since the same SID is used at + multiple frequencies, the BSSID must be provided in the WPA configuration + file.
\ No newline at end of file diff --git a/recipes-kernel/rs9113/files/immunity/tworadio.sh b/recipes-kernel/rs9113/files/immunity/tworadio.sh new file mode 100755 index 0000000..1ce3640 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/tworadio.sh @@ -0,0 +1,58 @@ +#!/bin/bash +# +# Environmental variables: +# BTADDR Bluetooth MAC address +# BTCHAN Bluetooth Channel +# WIFIURL WiFi test Address +# WIFIFILE WiFi +# WPA_CONFIG Config file for wpa_supplicant. +# +BTPIDFILE=/opt/immunity/btpid +PGRP=$(ps --no-headings -o pgrp $$ | sed -r 's/[[:space:]]//g') +trap "kill -15 -${PGRP}" EXIT +HOME=/home/root +INTERFACES=/etc/network/interfaces + +if [[ $1 == wifisetup ]] ; then + wifisetup=true +else + wifisetup=false +fi +. /etc/default/rs9113 + +if [[ $COEX_MODE != 5 ]] ; then + sed -i 's/^COEX_MODE=[0-9]*/COEX_MODE=5/' /etc/default/rs9113 +fi +if ! egrep 'auto[[:space:]]+wifi0' $INTERFACES ; then + echo '# Added for wifi testing -- tworadio.sh' >> $INTERFACES + echo 'auto wifi0' >> $INTERFACES +fi + +if ! egrep 'iface[[:space:]]+wifi0' $INTERFACES ; then + echo '# Added for wifi testing -- tworadio.sh' >> $INTERFACES + echo 'iface wifi0 inet dhcp' >> $INTERFACES +fi + +/etc/init.d/rs9113 restart +rm -f btpid +sleep 5 + +echo 'Starting bluetooth -- this may take a while' +if ! $wifisetup ; then + /opt/immunity/bluetoothXfer.sh $BTADDR $BTCHAN & +fi +BTPID=$! +while [[ $BTPID != $(cat $BTPIDFILE 2>/dev/null) ]] ; do + sleep 1 +done +echo +echo 'Bluetooth set up, now set up WiFi' +if $wifisetup ; then + /opt/immunity/wifiXfer.sh wifisetup +else + /opt/immunity/wifiXfer.sh "$WIFIURL" "$WIFIFILE" & +fi +WIFIPID=$! +wait $BTPID +wait $WIFIPID + diff --git a/recipes-kernel/rs9113/files/immunity/wifiXfer.sh b/recipes-kernel/rs9113/files/immunity/wifiXfer.sh new file mode 100755 index 0000000..dd8cad0 --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/wifiXfer.sh @@ -0,0 +1,62 @@ +#!/bin/bash +: ${WPA_CONFIG:=/etc/wpa_supplicant/wifitest.conf} +URL=$1 +if ((${#URL} == 0)) ; then + URL='http://www.multitech.net/mlinux/feeds/3.2/arm926ejste/nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk' +fi + +if [[ $URL == wifisetup ]] ; then + wifisetup=true +else + wifisetup=false +fi + +FILE=$2 +if ((${#FILE} == 0)) ; then + FILE='nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk' +fi +ifdown wifi0 + +if ! [[ -r ${WPA_CONFIG} ]] ; then + echo Missing wifi configuration file $WPA_CONFIG + exit 1 +fi + +/opt/rs9113/onebox_util rpine0 enable_protocol 3 +sleep 3 +/opt/rs9113/onebox_util rpine0 set_country 840 +sleep 3 +/opt/rs9113/onebox_util rpine0 create_vap wifi0 sta sw_bmiss + +if $wifisetup ; then + sleep 3 + ifup wifi0 + sleep 3 + # So iwlist scan will work. + # iw does not have good signal strenght values. + iw dev wifi0 scan >/dev/null 2>&1 + exit 0 +else + supplicant=$(ps -o args,pid -e | grep wpa_supplicant | grep -v grep | sed -r 's/.*[[:space:]]([0-9]*)$/\1/') + if ((${#supplicant})) ; then\ + kill ${supplicant} + sleep 2 + fi + echo Pre start of supplicant + ps -ef | grep wpa_supplicant + sleep 2 + /usr/sbin/wpa_supplicant -B -i wifi0 -D nl80211 -c "${WPA_CONFIG}" + echo Post start of supplicant + ps -ef | grep wpa_supplicant + sleep 2 + while ! ifup wifi0 ; do + sleep 1 + done +fi +sleep 2 +((count=0)) +cd /var/volatile +echo Downloading file $FILE from Address $URL repeatedly +rm -f ${FILE}* +while time wget "${URL}" ; do rm -f ${FILE}* ; done +exit 0 diff --git a/recipes-kernel/rs9113/files/rf/LICENSE.txt b/recipes-kernel/rs9113/files/rf/LICENSE.txt new file mode 100644 index 0000000..d511905 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/LICENSE.txt @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Lesser General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. diff --git a/recipes-kernel/rs9113/files/rf/ble2 b/recipes-kernel/rs9113/files/rf/ble2 new file mode 100755 index 0000000..3332223 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/ble2 @@ -0,0 +1,38 @@ +#!/bin/bash +echo 'Bluetooth transmit' +echo 'Optional 1st parameter is channel, 2nd is data rate, 2 or 3Mbps' +echo '3rd parameter is hopping type: 0 (no hopping) 1 (fixed hopping) 2 (random hopping)' +echo '4th parameter is receive channel required for fixed hopping' +btchan=8 +if [[ -n $1 ]] ; then + btchan=$1 +fi +dr=3 +if [[ -n $2 ]] ; then + dr=$2 +fi +ht=0 +if [[ -n $3 ]] ; then + ht=$3 +fi +rcvchan=9 +if [[ -n $4 ]] ; then + rcvchan=$4 +fi +((burst=1)) +if ((ht != 0)) ; then + ((burst=0)) +fi +export DRIVER_MODE=2 +export COEX_MODE=8 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +echo 0 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 2 +cd /opt/rs9113 +bash onebox_insert.sh +sleep 2 +echo "Using channel WiFi BT channel $btchan BT Data Rate $dr" +echo "Using receive channel $rcvchan" diff --git a/recipes-kernel/rs9113/files/rf/bt b/recipes-kernel/rs9113/files/rf/bt new file mode 100755 index 0000000..b9eff16 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/bt @@ -0,0 +1,40 @@ +#!/bin/bash +echo 'Bluetooth transmit' +echo 'Optional 1st parameter is channel, 2nd is data rate, 2 or 3Mbps' +echo '3rd parameter is hopping type: 0 (no hopping) 1 (fixed hopping) 2 (random hopping)' +echo '4th parameter is receive channel required for fixed hopping' +btchan=8 +if [[ -n $1 ]] ; then + btchan=$1 +fi +dr=3 +if [[ -n $2 ]] ; then + dr=$2 +fi +ht=0 +if [[ -n $3 ]] ; then + ht=$3 +fi +rcvchan=9 +if [[ -n $4 ]] ; then + rcvchan=$4 +fi +((burst=1)) +if ((ht != 0)) ; then + ((burst=0)) +fi +export DRIVER_MODE=2 +export COEX_MODE=4 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +echo 0 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 2 +cd /opt/rs9113 +bash onebox_insert.sh +sleep 2 +echo "Using channel WiFi BT channel $btchan BT Data Rate $dr" +echo "Using receive channel $rcvchan" +set -x +/opt/rs9113/bt_transmit 0023a7010203 15 1021 $dr $rcvchan $btchan 1 0 0 1 1 0 18 $burst $ht 2 diff --git a/recipes-kernel/rs9113/files/rf/bt2 b/recipes-kernel/rs9113/files/rf/bt2 new file mode 100755 index 0000000..feb77f4 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/bt2 @@ -0,0 +1,38 @@ +#!/bin/bash +echo 'Bluetooth transmit' +echo 'Optional 1st parameter is channel, 2nd is data rate, 2 or 3Mbps' +echo '3rd parameter is hopping type: 0 (no hopping) 1 (fixed hopping) 2 (random hopping)' +echo '4th parameter is receive channel required for fixed hopping' +btchan=8 +if [[ -n $1 ]] ; then + btchan=$1 +fi +dr=3 +if [[ -n $2 ]] ; then + dr=$2 +fi +ht=0 +if [[ -n $3 ]] ; then + ht=$3 +fi +rcvchan=9 +if [[ -n $4 ]] ; then + rcvchan=$4 +fi +((burst=1)) +if ((ht != 0)) ; then + ((burst=0)) +fi +export DRIVER_MODE=2 +export COEX_MODE=4 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +echo 0 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 2 +cd /opt/rs9113 +bash onebox_insert.sh +sleep 2 +echo "Using channel WiFi BT channel $btchan BT Data Rate $dr" +echo "Using receive channel $rcvchan" diff --git a/recipes-kernel/rs9113/files/rf/btr b/recipes-kernel/rs9113/files/rf/btr new file mode 100755 index 0000000..0854377 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/btr @@ -0,0 +1,17 @@ +#!/bin/bash +echo 'Bluetooth receive, single channel parameter' +export DRIVER_MODE=2 +export COEX_MODE=4 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +cd /opt/rs9113 +bash wlan_bt_insert.sh +sleep 2 +chan=1 +if [[ -n $1 ]] ; then + chan=$1 +fi +echo Using channel $1 for wifi receive +set -x + +/opt/rs9113/bt_receive 0023a7010203 1 15 1021 0 3 $chan $chan 1 1 0 2 + diff --git a/recipes-kernel/rs9113/files/rf/stop b/recipes-kernel/rs9113/files/rf/stop new file mode 100755 index 0000000..a04ae70 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/stop @@ -0,0 +1,4 @@ +#!/bin/bash +echo Stopping transmission +/etc/init.d/rs9113 stop >/dev/null 2>&1 + diff --git a/recipes-kernel/rs9113/files/rf/ubt b/recipes-kernel/rs9113/files/rf/ubt new file mode 100755 index 0000000..c8dd5d2 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/ubt @@ -0,0 +1,30 @@ +#!/bin/bash +echo 'Optional 1st parameter is channel' +btchan=8 +if [[ -n $1 ]] ; then + btchan=$1 +fi +dr=3 +ht=0 +rcvchan=9 +((burst=1)) +if ((ht != 0)) ; then + ((burst=0)) +fi +export DRIVER_MODE=2 +export COEX_MODE=4 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +echo 0 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 1 +echo 1 >/sys/devices/platform/mts-io/wifi-bt-reset +sleep 2 +cd /opt/rs9113 +bash onebox_insert.sh +sleep 2 +echo "Using channel WiFi BT channel $btchan BT Data Rate $dr" +echo "Using receive channel $rcvchan" +set -x +/opt/rs9113/bt_transmit 0023a7010203 15 1021 $dr $rcvchan $btchan 1 0 0 1 1 0 18 $burst $ht 2 +sleep 10 +/opt/rs9113/bt_util cw_mode $btchan 0 3 diff --git a/recipes-kernel/rs9113/files/rf/uwf b/recipes-kernel/rs9113/files/rf/uwf new file mode 100755 index 0000000..c789299 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/uwf @@ -0,0 +1,43 @@ +#!/bin/bash +echo 'Optional 1st parameter is wifi channel' +echo '2nd parameter is rate 1,18,54 or other valid rate' +echo '3rd parameter is width, 0 for 20MHz, and 24 for 40MHz' +echo '2nd parameter values: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54,' +echo ' mcs0, mcs1, mcs2, mcs3, mcs4, mcs5, mcs6,' +echo '3rd parameter values:' +echo '0 is 20MHz, 2 is upper 20 of 40, 4 is lower 20 of 40, 6 is 40MHz, 8 is 20KHz for 11J' +chan=8 +if [[ -n $1 ]] ; then + chan=$1 +fi +rate=54 +if [[ -n $2 ]] ; then + rate=$2 +fi +flag=0 +if [[ -n $3 ]] ; then + flag=$3 +fi +export DRIVER_MODE=2 +export COEX_MODE=1 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +cd /opt/rs9113 +bash wlan_bt_insert.sh +sleep 2 +echo "Using channel WiFi $chan BT $btchan" +echo chan $chan +echo "Start modulated signal for 10 seconds" +echo "Use antenna port 2" +set -x +sleep 2 +/opt/rs9113/onebox_util rpine0 ant_sel 2 +# Maximum signal strength is 18 +/opt/rs9113/transmit rpine0 18 $rate 1536 1 $chan 0 $flag 0 0 0 255 +set +x +sleep 10 +echo Bring up unmodulated signal +set -x +/opt/rs9113/transmit rpine0 1 +/opt/rs9113/onebox_util rpine0 ant_sel 2 +/opt/rs9113/onebox_util rpine0 cw_mode $chan 0 5 + diff --git a/recipes-kernel/rs9113/files/rf/wf b/recipes-kernel/rs9113/files/rf/wf new file mode 100755 index 0000000..832ec51 --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/wf @@ -0,0 +1,43 @@ +#!/bin/bash +echo 'Optional 1st parameter is wifi channel' +echo '2nd parameter is rate 1,18,54 or other valid rate' +echo '3rd parameter is width, 0 for 20MHz, and 24 for 40MHz' +echo '2nd parameter values: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54,' +echo ' mcs0, mcs1, mcs2, mcs3, mcs4, mcs5, mcs6,' +echo ' and mcs7' +echo '3rd parameter values:' +echo '0 is 20MHz, 2 is upper 20 of 40, 4 is lower 20 of 40, 6 is 40MHz, 8 is 20KHz for 11J' +echo '4th and 5th parameters: antenna gain values in db of 2.4GHZ and 5GHZ respectively' +gain2=0 +gain5=0 +if [[ -n $4 ]] ; then + gain2=$4 +fi +if [[ -n $5 ]] ; then + gain5=$5 +fi +chan=8 +if [[ -n $1 ]] ; then + chan=$1 +fi +rate=54 +if [[ -n $2 ]] ; then + rate=$2 +fi +flag=0 +if [[ -n $3 ]] ; then + flag=$3 +fi +export DRIVER_MODE=2 +export COEX_MODE=1 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +cd /opt/rs9113 +bash wlan_bt_insert.sh +sleep 2 +echo "Using channel WiFi $chan BT $btchan" +set -x +echo chan $chan +/opt/rs9113/onebox_util rpine0 ant_sel 2 +/opt/rs9113/onebox_util rpine0 set_ext_ant_gain $gain2 $gain5 +/opt/rs9113/transmit rpine0 18 $rate 1536 1 $chan 0 $flag 0 0 0 255 + diff --git a/recipes-kernel/rs9113/files/rf/wf2 b/recipes-kernel/rs9113/files/rf/wf2 new file mode 100755 index 0000000..b56a68f --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/wf2 @@ -0,0 +1,41 @@ +#!/bin/bash +echo 'Optional 1st parameter is wifi channel' +echo '2nd parameter is rate 1,18,54 or other valid rate' +echo '3rd parameter is width, 0 for 20MHz, and 24 for 40MHz' +echo '2nd parameter values: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54,' +echo ' mcs0, mcs1, mcs2, mcs3, mcs4, mcs5, mcs6,' +echo ' and mcs7' +echo '3rd parameter values:' +echo '0 is 20MHz, 2 is upper 20 of 40, 4 is lower 20 of 40, 6 is 40MHz, 8 is 20KHz for 11J' +echo '4th and 5th parameters: antenna gain values in db of 2.4GHZ and 5GHZ respectively' +gain2=0 +gain5=0 +if [[ -n $4 ]] ; then + gain2=$4 +fi +if [[ -n $5 ]] ; then + gain5=$5 +fi +chan=8 +if [[ -n $1 ]] ; then + chan=$1 +fi +rate=54 +if [[ -n $2 ]] ; then + rate=$2 +fi +flag=0 +if [[ -n $3 ]] ; then + flag=$3 +fi +export DRIVER_MODE=2 +export COEX_MODE=1 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +cd /opt/rs9113 +bash wlan_bt_insert.sh +sleep 2 +echo "Using channel WiFi $chan BT $btchan" +set -x +echo chan $chan +/opt/rs9113/onebox_util rpine0 ant_sel 2 +/opt/rs9113/onebox_util rpine0 set_ext_ant_gain $gain2 $gain5 diff --git a/recipes-kernel/rs9113/files/rf/wfr b/recipes-kernel/rs9113/files/rf/wfr new file mode 100755 index 0000000..ad9619b --- /dev/null +++ b/recipes-kernel/rs9113/files/rf/wfr @@ -0,0 +1,23 @@ +#!/bin/bash +echo 'WiFi recieve' +echo 'Parameter 1 is channel' +echo 'Paramter 2 is width' +echo '0 is 20MHz, 2 is upper 20 of 40, 4 is lower 20 of 40, 6 is 40MHz, 8 is 20KHz for 11J' +export DRIVER_MODE=2 +export COEX_MODE=1 +/etc/init.d/rs9113 stop >/dev/null 2>&1 +cd /opt/rs9113 +bash wlan_bt_insert.sh +sleep 2 +chan=1 +if [[ -n $1 ]] ; then + chan=$1 +fi +width=0 +if [[ -n $2 ]] ; then + width=$2 +fi +echo Using channel $1 for wifi receive +set -x +/opt/rs9113/receive /dev/null $chan 0 $width + diff --git a/recipes-kernel/rs9113/files/rs9113/mts-rm-rs9113 b/recipes-kernel/rs9113/files/rs9113/mts-rm-rs9113 new file mode 100755 index 0000000..a7a30c2 --- /dev/null +++ b/recipes-kernel/rs9113/files/rs9113/mts-rm-rs9113 @@ -0,0 +1,51 @@ +#!/bin/bash +### BEGIN INIT INFO +# Provides: mts-rm-rs9113 +# Default-Start: S +# Default-Stop: +# Short-Description: remove the rs9113 driver if no rs9113 present +# Description: If mts-io capability wifi exists, test it and remove +# the rs9113 related packages if present and no wifi +# capability. Must run after mts-io but before rs9113. +### END INIT INFO + +# update-rc.d mts-rm-rs9113 start 40 S . + +sysdir=/sys/devices/platform/mts-io +remount=0 + +function cleanup { + if ((remount == 1)) ; then + mount -o ro,remount / + fi +} + +trap cleanup EXIT + +if [[ -f ${sysdir}/capability/wifi ]] ; then + if [[ -f /opt/rs9113/onebox_wlan_nongpl.ko ]] && (( $(cat ${sysdir}/capability/wifi) == 0)) ; then + logger -sp daemon.info 'Attempting to remove rs9113 drivers from non-wifi device' + rmount=$(grep '^/dev/root' /proc/mounts) + remount=0 + if [[ $rmount =~ [[:space:],]ro[[:space:],] ]] ; then + remount=1 + mount -o rw,remount / + fi + plist="rs9113-autostart rs9113-misc rs9113-noarch rs9113-util rs9113-utils-extra kernel-module-rs9113" + for p in $plist ; do + opkg remove $p + done + + rlist=$(opkg list-installed | grep rs9113) + + for p in $plist ; do + # Hopefully the packages have been removed. + if [[ $rlist =~ (^|[[:space:]])${p}[[:space:]] ]] ; then + exit 1 + fi + done + + fi + + update-rc.d -f mts-rm-rs9113 remove +fi diff --git a/recipes-kernel/rs9113/files/rs9113/rs9113.default b/recipes-kernel/rs9113/files/rs9113/rs9113.default new file mode 100644 index 0000000..87b619a --- /dev/null +++ b/recipes-kernel/rs9113/files/rs9113/rs9113.default @@ -0,0 +1,66 @@ +# +# Skip loading the RS9113 related drivers if +# set to zero. +# +RS9113_LOAD=1 + +# Parameters for rs9113 driver +# +# Enable Antenna Diversity (1) +RSI_ANTENNA_DIVERSITY=0 + +# COEX_MODE options: +# 1 WLAN STATION /WIFI-Direct/WLAN PER +# 2 WLAN ACCESS POINT(including muliple APs on different vaps) +# 3 WLAN ACCESS POINT + STATION MODE(on multiple vaps) +# 4 BT CLASSIC MODE/BT CLASSIC PER MODE +# 5 WLAN STATION + BT CLASSIC MODE +# 6 WLAN ACCESS POINT + BT CLASSIC MODE +# 8 BT LE MODE /BT LE PER MODE +# 9 WLAN STATION + BT LE MODE +# 12 BT CLASSIC + BT LE MODE +# 14 WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE +COEX_MODE=6 + +# Power selection +# 0x00 - For Both TX and RX High Power +# 0x11 - For Both TX and RX Medium Power +# 0x22 - For Both TX and RX LOW Power +# 0x10 - For High Power TX and Medium RX Power +# 0x20 - For High Power TX and LOW RX Power +# 0x01 - For Medium TX and RX High Power +# 0x21 - For Medium Power TX and LOW RX Power +# 0x02 - For Low Power TX and RX High Power +# 0x12 - For LOW Power TX and Medium RX Power +WLAN_RF_PWR_MODE=0x00 +BT_RF_PWR_MODE=0x00 + +#Power_mode type +# 0 - HIGH POWER MODE +# 1 - MEDIUM POWER MODE +# 2 - LOW POWER MODE +BT_RF_TX_POWER_MODE=0 +BT_RF_RX_POWER_MODE=0 + +# Country Selection +# 0 World Domain +# 840 US Domain Maps to US Region +# 276 Germany Maps to EU Region +# 392 Japan Maps to Japan Region +# from ISO 3166-1 +SET_COUNTRY_CODE=0 + +# 2 – Select internal antenna +# 3 – Select external antenna +ANT_SEL_VAL=2 + +ONBOARD_ANT_SEL=1 +SET_RETRY_COUNT=15 + +# Time to hold high, then hold low on reset during driver load reset +SLEEPTIME=100000 + +# Time to wait while looping for interrupt and wake-up pins +# to go high. +INTSLEEPTIME=100000 + diff --git a/recipes-kernel/rs9113/files/rs9113/rs9113.init b/recipes-kernel/rs9113/files/rs9113/rs9113.init new file mode 100755 index 0000000..4ef6f4b --- /dev/null +++ b/recipes-kernel/rs9113/files/rs9113/rs9113.init @@ -0,0 +1,100 @@ +#!/bin/bash +# Note that none of the INIT stuff below works in the current open-embedded. +### BEGIN INIT INFO +# Provides: rs9113 +# Required-Start: mts-io +# Default-Start: S +# Default-Stop: 0 6 +# X-Start-Before: networking +# Short-Description: load the rs9113 drivers +# Description: rs9113 drivers are used to provide access to Bluetooth +# and WiFi. +### END INIT INFO + +CONFIG=${CONFIG:-/etc/default/rs9113} +MTS_IODIR=/sys/devices/platform/mts-io +RS9113_RESET=${MTS_IODIR}/wifi-bt-reset +RS9113_INT=${MTS_IODIR}/wifi-bt-int +RS9113_WKUP=${MTS_IODIR}/wifi-bt-lpwkup + +[ -f $CONFIG ] || exit 1 + +. $CONFIG + +case "$1" in + start) + if ((RS9113_LOAD == 0)) ; then + # We don't want the driver loaded. + exit 0 + fi + # Reset the RS9113 chip is ready, and + # wait for it to settle. + if [ -f "$RS9113_RESET" ] ; then + echo 1 >$RS9113_RESET + usleep $SLEEPTIME + echo 0 >$RS9113_RESET + usleep $SLEEPTIME + echo 1 >$RS9113_RESET + N=1 + while [ $N -lt 20 ] ; do + INT=$(cat $RS9113_INT) + WKUP=$(cat $RS9113_WKUP) + if [ $INT -ne 1 -o $WKUP -ne 1 ] ; then + usleep $INTSLEEPTIME + else + break + fi + done + if [ $INT -ne 1 ] ; then + logger -t rs9113 -p error -s "$RS9113_INT is $INT" + fi + if [ $WKUP -ne 1 ] ; then + logger -t rs9113 -p error -s "$RS9113_WKUP is $WKUP" + fi + else + # No WiFi BT, so exit quietly + exit 0 + fi + /usr/bin/logger -t "rs9113" -p info -s "Loading rs9113 modules with COEX=$COEX_MODE and Country=$SET_COUNTRY_CODE" + /usr/sbin/rs9113_load_modules.sh $CONFIG + RETVAL=$? + if [ $RETVAL -eq 0 ] ; then + echo "OK" + else + echo "FAIL" + fi + ;; + + stop) + /usr/bin/logger -t "rs9113" -p info -s "Unloading rs9113 modules" + /usr/sbin/rs9113_remove_modules.sh + RETVAL=$? + if [ $RETVAL -eq 0 ] ; then + echo "OK" + else + echo "FAIL" + fi + ;; + restart) + $0 stop + sleep 1 + $0 start + ;; + status) + for dir in /sys/class/net/rpine[0-9]* ; do + if [[ -d ${dir} ]] ; then + echo Driver is loaded + exit 0 + fi + done + echo Driver is not loaded + exit 3 + ;; + *) + "Usage: $0 {start|stop|status|restart}" + exit 2 + ;; +esac + +exit 0 + diff --git a/recipes-kernel/rs9113/files/rs9113/wpa_supplicant b/recipes-kernel/rs9113/files/rs9113/wpa_supplicant new file mode 100755 index 0000000..6aa6456 --- /dev/null +++ b/recipes-kernel/rs9113/files/rs9113/wpa_supplicant @@ -0,0 +1,95 @@ +#! /bin/sh +# wpa_supplicant +# Example for /etc/init.d +# MTS +# +PATH=/sbin:/bin:/usr/bin:/usr/sbin +PIDFILE=/var/run/wpa_suplicant +CONF=/etc/wpa_supplicant/psk5g.conf +TIMELIMIT=60 +DRIVERNAME=wifi0 +upinterface() { + ((loopcount=1)) + while ((loopcount < TIMELIMIT)) ; do + if [[ $(iw dev ${DRIVERNAME} link) =~ "Connected to " ]] ; then + break; + fi + sleep 1 + ((loopcount++)) + done + ((loopcount=1)) + while ((loopcount < TIMELIMIT)) ; do + ldifs="$IFS" + IFS=$'\n' + result=($(ifup wifi0 2>&1)) + oldifs="$IFS" + show=$(ip addr show) + if [[ ${show} =~ [[:space:]]+inet[[:space:]]*[0-9].*[[:space:]]+global[[:space:]]+wifi0[[:space:]] ]] ; then + break + fi + ifdown wifi0 + sleep 1 + ((loopcount++)) + done + for (( i=0; i < ${#result[@]}; i++ )); do + if [[ ${result[i]} =~ ^[[:space:]]*$ ]] ; then + continue; + fi + logger -t ifup -p daemon.info "${result[i]}" + done +} + +# ntpd init.d script for ntpdc from ntp.isc.org +test -x /usr/sbin/wpa_supplicant -a -r $CONF || exit 0 +if ! [[ -r $CONF ]] ; then + logger -s -t wpa_supplicant -p daemon.err "Cannot find configuration file $CONF" +fi +test -r /etc/default/rcS && . /etc/default/rcS + +# Functions to do individual actions +startdaemon(){ + echo -n "Starting wpa_supplicant: " + /opt/rs9113/onebox_util rpine0 enable_protocol 1 + /opt/rs9113/onebox_util rpine0 set_country 840 + /opt/rs9113/onebox_util rpine0 create_vap ${DRIVERNAME} sta sw_bmiss >/dev/null 2>&1 + start-stop-daemon --start -x wpa_supplicant -- -i ${DRIVERNAME} -D nl80211 -P $PIDFILE /var/run/ -B -c $CONF +} +stopdaemon(){ + echo -n "Stopping ntpd: " + start-stop-daemon --stop -p $PIDFILE + echo "done" +} + +case "$1" in + start) + if ! [[ -f ${CONF} ]] ; then + echo "Skipping. Configuration file ${CONF} not found." + exit 1 + fi + startdaemon + { upinterface & } + ;; + stop) + ifdown ${DRIVERNAME} >/dev/null 2>&1 + stopdaemon + ;; + force-reload) + stopdaemon + startdaemon + ;; + restart) + # Don't reset the tick here + stopdaemon + startdaemon + ;; + reload) + stopdaemon + startdaemon + ;; + *) + echo "Usage: wpa_supplicant { start | stop | restart | reload }" >&2 + exit 1 + ;; +esac + +exit 0 diff --git a/recipes-kernel/rs9113/rs9113-from-src_1.6.1.bb b/recipes-kernel/rs9113/rs9113-from-src_1.6.1.bb new file mode 100644 index 0000000..2022d88 --- /dev/null +++ b/recipes-kernel/rs9113/rs9113-from-src_1.6.1.bb @@ -0,0 +1,84 @@ +DESCRIPTION = "USB Driver for Redpine RS9113" +LICENSE = "Proprietary" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28" +PROVIDES = "rs9113-from-src" +PR = "r10${KERNEL_MODULE_PACKAGE_SUFFIX}" +INHIBIT_PACKAGE_STRIP = "1" +BB_STRICT_CHECKSUM = "0" +inherit module + +SRCREV = "${AUTOREV}" +SRCREV_FORMAT = "machine" + +SRC_URI = " \ + git://git@${MTS_INTERNAL_GIT}/mlinux/meta-rs9113.git;protocol=ssh;branch=${PV};destsuffix=meta/ \ + git://git@${MTS_INTERNAL_GIT}/mlinux/Redpine.git;protocol=ssh;branch=${PV} \ +" +SRCXX_URI = " \ + git://git@${MTS_INTERNAL_GIT}/mlinux/Redpine.git;protocol=ssh;branch=${PV};name=machine \ + git://git@${MTS_INTERNAL_GIT}/mlinux/meta-rs9113.git;protocol=ssh;branch=${PV};name=meta \ +" + +S = "${WORKDIR}/git/source/host" +M = "${WORKDIR}/meta" + +EXTRA_OEMAKE = " KERNELDIR=${STAGING_KERNEL_DIR} \ + CROSS_COMPILE=${TARGET_PREFIX} \ + ARCH=arm \ + WLAN_COMPILE_FLAGS='' \ + V=1 \ + " + +FILES_${PN} = "/opt/rs9113 ${sbindir}" +FILES_${PN}-dbg = "/opt/rs9113/.debug/" + +PARALLEL_MAKE = "" + +# Avoid QA Issue: No GNU_HASH in the elf binary +INSANE_SKIP_${PN} = "ldflags" +INSANE_SKIP_${PN}-dev = "ldflags" + +do_configure() { + cp ${M}/${MACHINE}/defconfig .config +} + +do_compile () { + unset CFLAGS LDFLAGS CXXFLAGS CPPFLAGS + # For Newer Yocto/Bitbake, CC does not + # include the staging directory + # by default + CC="${CC} --sysroot=${STAGING_DIR_HOST}" + LD="${LD} --sysroot=${STAGING_DIR_HOST}" + oe_runmake CC="${CC}" LD="${LD}" +} + +do_patch () { + cd ${WORKDIR}/git + for f in ${M}/patches/* ; do + # Cannot use [[ $f =~ \.patch$ ]] here because the $ after patch breaks the recipe. + if echo ${f} | grep '\.patch$' >/dev/null 2>&1 ; then + echo found patch ${f} + patch -Np1 < ${f} + else + fname=$(basename ${f}) + oldf=$(find . -name ${fname}) + echo "copying $f to ${oldf}" + cp ${f} ${oldf} + fi + done +} + +do_install() { + echo D is ${D} + install -m 0755 -d ${D}/opt/rs9113 + cp -r ${S}/release/* ${D}/opt/rs9113/ + rm -rf ${D}/opt/rs9113/flash ${D}/opt/rs9113/certs ${D}/opt/rs9113/*zigb* + install -m 0755 -d ${D}${sbindir} + install -m 0755 ${M}/rs9113_load_modules.sh ${D}${sbindir}/ + install -m 0755 ${M}/rs9113_remove_modules.sh ${D}${sbindir}/ + # New patch makes p2commands.sh a bash script. + cd ${D}/opt/rs9113/ + mv p2pcommands.pl p2pcommands.sh + ln -sf p2pcommands.sh p2pcommands.pl +} + diff --git a/recipes-kernel/rs9113/rs9113.inc b/recipes-kernel/rs9113/rs9113.inc new file mode 100644 index 0000000..7e9accd --- /dev/null +++ b/recipes-kernel/rs9113/rs9113.inc @@ -0,0 +1,206 @@ +inherit update-rc.d +inherit module +PACKAGE_ARCH = "${MACHINE_ARCH}" + +# utils-extra picks up ELF executables we don't want on most images. +# misc picks up non-ELF's we don't want on most images. +# kernel-module-rs9113 picks up the *.ko files. +# util contains the onebox utility for creating the VAP. +# noarch contains the init script and configuration for the driver and +# the firmware file (firmware/*.rps). +PACKAGES = " \ + ${PN}-utils-extra \ + ${PN}-rm \ + ${PN}-misc \ + kernel-module-${PN} \ + ${PN}-util \ + ${PN}-dbg \ + ${PN}-autostart \ + ${PN}-btclonly \ + ${PN}-noarch \ + " + +ALLOW_EMPTY_${PN}-autostart = "1" + +# MD: PACKAGE_ARCH_${PN} doesn't work for some reason +#PACKAGE_ARCH_${PN}-rm = "all" +#PACKAGE_ARCH_${PN}-noarch = "all" +#PACKAGE_ARCH_${PN}-misc = "all" +#PACKAGE_ARCH_${PN}-autostart = "all" +#PACKAGE_ARCH_${PN}-util = "${TUNE_PKGARCH}" +#PACKAGE_ARCH_${PN}-utils-extra = "${TUNE_PKGARCH}" +#PACKAGE_ARCH_${PN}-dbg = "${TUNE_PKGARCH}" +#PACKAGE_ARCH_${PN}-btclonly = "all" +RDEPENDS_${PN}-noarch = "bash" +RDEPENDS_${PN}-misc = "bash" +RDEPENDS_${PN}-btclonly = "${PN}-noarch" + +ALLOW_EMPTY_${PN}-btclonly = "1" + +DR = "${DL_DIR}/rs9113-ipk" +FILESEXTRAPATHS_append := "${DR}:" + +INITSCRIPT_PACKAGES = "${PN}-autostart ${PN}-rm" +INITSCRIPT_NAME_${PN}-autostart = "rs9113" +INITSCRIPT_PARAMS_${PN}-autostart = "start 50 S ." + +# ${PN}-rm must start after mts-io driver is loaded. +INITSCRIPT_NAME_${PN}-rm = "mts-rm-rs9113" +INITSCRIPT_PARAMS_${PN}-rm = "start 39 S ." + +RDEPENDS_${PN}-autostart = "${PN}-noarch" + +BB_STRICT_CHECKSUM = "0" + +# Avoid QA Issue: No GNU_HASH in the elf binary +INSANE_SKIP_${PN} = "ldflags" +INSANE_SKIP_${PN}-dev = "ldflags" + +python do_fetch_prepend () { + # d.setVar('BB_STRICT_CHECKSUM',False) + DR = d.getVar("DR",True) + bb.note("DR is " + DR) + + ARCH = d.getVar("PACKAGE_ARCH",True) + + try: + os.mkdir(DR,0o755) + except OSError: + pass + try: + ex = "export SSH_AUTH_SOCK=" + d.getVar("SSH_AUTH_SOCK",True) + except TypeError: + ex=":" + bb.note("SSH_AUTH_SOCK not set. SSH keys must not use a pass phrase") + bb.note("export is " + ex) + + gt = "git archive -v --remote=git@" + + + gitversion = d.getVar("PV",True) + + PV = gitversion + "-" + try: + PV += d.getVar("PR",True) + except TypeError: + bb.fatal("PR is missing from recipe") + + bb.note("PV is " + PV) + + ipkn = "rs9113-from-src_" + PV + ".0_" + ARCH + ".ipk" + bb.note("ipkname is " + ipkn) + bb.note ("ipk path is " + DR + "/" + ipkn) + + try: + gt += d.getVar("MTS_INTERNAL_GIT",True) + except TypeError: + if os.path.isfile(DR + "/" + ipkn): + return + bb.fatal("Need " + DR + "/" + ipkn + " or set MTS_INTERNAL_GIT and add it to BB_ENV_EXTRAWHITE") + + gt += ":mlinux/ipk.git " + gitversion + bb.note("git is " + gt) + tar = "tar -vx --strip-components 1 -C " + DR + " rs9113/" + ipkn + bb.note("tar is " + tar) + os.system(ex + ";" + gt + "|" + tar) +} + +FILES_${PN}-rm = "${sysconfdir}/init.d/mts-rm-rs9113" + +# Required drivers for Bluetooth and WiFi +FILES_kernel-module-${PN} = " \ + /opt/rs9113/*.ko \ + " + +# Required utility +FILES_${PN}-util = "/opt/rs9113/onebox_util" + +FILES_${PN}-dbg = "/opt/rs9113/.debug/bt_bbp_utils \ + /opt/rs9113/.debug \ + " + +# ELF files here are not normally installed on images. +FILES_${PN}-utils-extra = " \ + /opt/rs9113/zb* \ + /opt/rs9113/bt_transmit \ + /opt/rs9113/zb_transmit \ + /opt/rs9113/transmit \ + /opt/rs9113/transmit_packet \ + /opt/rs9113/bt_receive \ + /opt/rs9113/receive \ + /opt/rs9113/zb_util \ + /opt/rs9113/bt_util \ + /opt/rs9113/bbp_util \ + /opt/rs9113/zb_bbp_util \ + /opt/rs9113/bt_receive \ + /opt/rs9113/bt_bbp_utils \ + /opt/rs9113/sniffer_app \ + /opt/rs9113/START_RS9116_NBZ_D0N \ + " + +# pmemdata is for upgrading rs9113 non-volatile firmware +# *.rps are firmware files for various modes of +# rs9113 or rs9116 operation. +# MODE_PER is for certification testing. +# ZIGBEE is not supported. +# Files here are not normally installed on images. +FILES_${PN}-misc = " \ + /opt/rs9113/firmware/RS9113_WLAN_BT_DUAL_MODE_PER.rps \ + /opt/rs9113/firmware/RS9113_ZIGBEE_ROUTER.rps \ + /opt/rs9113/firmware/RS9113_ZIGBEE_COORDINATOR.rps \ + /opt/rs9113/firmware/RS9113_WLAN_ZIGBEE.rps \ + /opt/rs9113/firmware/pmemdata* \ + /opt/rs9113/firmware/flash_content \ + /opt/rs9113/*RS9116* \ + /opt/rs9113/*.orig \ + /opt/rs9113/*.txt \ + /opt/rs9113/*.sh \ + /opt/rs9113/*.conf \ + /opt/rs9113/p2pcommands.pl \ + /opt/rs9113/*reg \ + /opt/rs9113/afe_spi \ + /opt/rs9113/init.d \ + " + +CONFFILES_${PN}-noarch = "${sysconfdir}/default/" + +# noarch gets what is left to package. +FILES_${PN}-noarch = " \ + /opt/ \ + ${sysconfdir}/init.d/ \ + ${sysconfdir}/default/ \ + ${prefix}/ \ + " +do_compile() { + : Nothing to do +} +MR = "${WORKDIR}/rs9113" +do_install () { + bbnote "pwd,ls: $(pwd) $(ls) WORKDIR is ${WORKDIR}" + ( + cd ${WORKDIR} + find etc -print0 | cpio --owner root:root -0 -pdum ${D} + find usr -print0 | cpio --owner root:root -0 -pdum ${D} + find opt -print0 | cpio --owner root:root -0 -pdum ${D} + ) + install -d ${D}/opt/rs9113/init.d + install -d ${D}${sysconfdir}/init.d/ + install -d ${D}${sysconfdir}/default/ + install -m 0755 ${MR}/wpa_supplicant ${D}/opt/rs9113/init.d + install -m 0755 ${MR}/rs9113.init ${D}${sysconfdir}/init.d/rs9113 + install -m 0644 ${MR}/rs9113.default ${D}${sysconfdir}/default/rs9113 + install -m 0755 ${MR}/mts-rm-rs9113 ${D}${sysconfdir}/init.d/mts-rm-rs9113 +} + +python do_cleanall_prepend () { + bb.note("In do_clean_prepend") + DR = d.getVar("DR",True) + bb.note("About to delete " + DR) + os.system("/bin/rm -rf " + DR) +} + +# btclonly package sets Bluetooth Classic mode +pkg_postinst_${PN}-btclonly() { + sed -i 's/^COEX_MODE=.*/COEX_MODE=4/' $D${sysconfdir}/default/rs9113 +} + diff --git a/recipes-kernel/rs9113/rs9113_1.6.1.bb b/recipes-kernel/rs9113/rs9113_1.6.1.bb new file mode 100644 index 0000000..cc7f2ef --- /dev/null +++ b/recipes-kernel/rs9113/rs9113_1.6.1.bb @@ -0,0 +1,31 @@ +require rs9113.inc +DESCRIPTION = "USB Driver for Redpine RS9113" +LICENSE = "Proprietary" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28" +do_fetch[depends] += "virtual/kernel:do_shared_workdir" +PROVIDES = "rs9113" +FILES_${PN} = "/opt/rs9113 ${sbindir} ${sysconfdir}" +RDEPENDS_${PN}-noarch += "bash" +RDEPENDS_${PN}-rm += "bash" +COMPATIBLE_MACHINE = "(mtcdt|mtrv1)" + +# This bitbake recipe requires SSH_AUTH_SOCK to be set if ssh key pass +# phrases are used. SSH_AUTH_SOCK is set by a keyserver, +# such as gnome-keyring-daemon or ssh-keyagent. + +# NOTE: rs9113 binary is built with Jenkin's job using rs9113-from-src_${PV}.bb +# To update this, manually copy ipk from Jenkin's job to +# git://git@${MTS_INTERNAL_GIT}/mlinux/ipk.git;protocol=ssh;branch=${PV} +# +PR = "r10${KERNEL_MODULE_PACKAGE_SUFFIX}" +SRC_URI = " \ + file://rs9113/rs9113.init \ + file://rs9113/rs9113.default \ + file://rs9113/mts-rm-rs9113 \ + file://rs9113/wpa_supplicant \ + file://rs9113-ipk/rs9113-from-src_${PV}-${PR}.0_${MACHINE}.ipk;name=binaries \ +" +SRCREV = "${AUTOREV}" +# For some reason the md5sum and sha256sum are ignored +SRC_URI[binaries.md5sum] = "7c0f7badf5a2a3b3dacc790ff0a9ce55" +SRC_URI[binaries.sha256sum] = "2780d417295999724ada4a08e6a196aaca55324af24b404e0f9b2f2ea7d4d830" diff --git a/recipes-kernel/rs9113/rs9113immunity.inc b/recipes-kernel/rs9113/rs9113immunity.inc new file mode 100644 index 0000000..87521ad --- /dev/null +++ b/recipes-kernel/rs9113/rs9113immunity.inc @@ -0,0 +1,37 @@ +DESCRIPTION = "Immunity testing for rs9113" +SECTION = "base" +PRIORITY = "optional" +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6" +PACKAGE_ARCH = "mtcdt" +SRC_URI = " \ + file://immunity/bluetoothXfer.sh \ + file://immunity/LICENSE.txt \ + file://immunity/readme.txt \ + file://immunity/tworadio.sh \ + file://immunity/mguest2g.conf \ + file://immunity/mguest5g.conf \ + file://immunity/conduitr2g.conf \ + file://immunity/conduitr5g.conf \ + file://immunity/wifiXfer.sh \ + file://immunity/SHA256SUMS \ + " + +FILES_${PN} = "/opt/immunity ${sysconfdir}/wpa_supplicant" + +do_install() { + install -m 0755 -d ${D}/opt/immunity + install -d ${D}${sysconfdir}/wpa_supplicant + ls ${WORKDIR} >/tmp/jaklog.txt + echo ${WORKDIR} >>/tmp/jaklog.txt + install -m 0644 ${WORKDIR}/immunity/*.conf ${D}${sysconfdir}/wpa_supplicant + ln -s /etc/wpa_supplicant/conduitr5g.conf ${D}${sysconfdir}/wpa_supplicant/wifitest.conf + install -m 0755 ${WORKDIR}/immunity/*.sh ${D}/opt/immunity + install -m 0644 ${WORKDIR}/immunity/*.txt ${D}/opt/immunity + pwd >>/tmp/jaklog.txt + cd ${D}/opt/immunity + dd if=/dev/urandom of=btfile count=40000 + chmod 0644 btfile + chown root:root btfile + pwd >>/tmp/jaklog.txt +} diff --git a/recipes-kernel/rs9113/rs9113immunity_1.1.bb b/recipes-kernel/rs9113/rs9113immunity_1.1.bb new file mode 100644 index 0000000..2e7170f --- /dev/null +++ b/recipes-kernel/rs9113/rs9113immunity_1.1.bb @@ -0,0 +1 @@ +require rs9113immunity.inc diff --git a/recipes-kernel/rs9113/rs9113rf.inc b/recipes-kernel/rs9113/rs9113rf.inc new file mode 100644 index 0000000..86a1f5e --- /dev/null +++ b/recipes-kernel/rs9113/rs9113rf.inc @@ -0,0 +1,30 @@ +DESCRIPTION = "Immunity testing for rs9113" +SECTION = "base" +PRIORITY = "optional" +LICENSE = "GPLv2+" +PR = "r2" +inherit allarch +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6" +SRC_URI = " \ + file://rf/LICENSE.txt \ + file://rf/ble2 \ + file://rf/bt \ + file://rf/bt2 \ + file://rf/btr \ + file://rf/stop \ + file://rf/ubt \ + file://rf/uwf \ + file://rf/wf \ + file://rf/wf2 \ + file://rf/wfr \ + " + +FILES_${PN} = "/opt/rs9113rf" + +RDEPENDS_${PN} = "bash" + +do_install() { + install -m 0755 -d ${D}/opt/rs9113rf + install -m 0755 ${WORKDIR}/rf/[^L]* ${D}/opt/rs9113rf + install -m 0444 ${WORKDIR}/rf/LICENSE.txt ${D}/opt/rs9113rf +} diff --git a/recipes-kernel/rs9113/rs9113rf_1.2.bb b/recipes-kernel/rs9113/rs9113rf_1.2.bb new file mode 100644 index 0000000..43ec216 --- /dev/null +++ b/recipes-kernel/rs9113/rs9113rf_1.2.bb @@ -0,0 +1 @@ +require rs9113rf.inc |