diff options
Diffstat (limited to 'recipes-kernel/rs9113/files/immunity/readme.txt')
| -rw-r--r-- | recipes-kernel/rs9113/files/immunity/readme.txt | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/recipes-kernel/rs9113/files/immunity/readme.txt b/recipes-kernel/rs9113/files/immunity/readme.txt new file mode 100644 index 0000000..5dfcfde --- /dev/null +++ b/recipes-kernel/rs9113/files/immunity/readme.txt @@ -0,0 +1,53 @@ +For wifi initialization to find the best BSSID's for testing: + /opt/immunity/tworadio.sh wifisetup + +Expect this in the output: + udhcpc (v1.22.1) started + Sending discover... + Sending discover... + Sending discover... + No lease, failing + +After doing wifisetup, it is possible to do a scan. + + iwlist wifi0 scanning + +This produces a list: + wifi0 Scan completed : + Cell 01 - Address: 00:27:0D:8C:57:28 + ESSID:"MTS-IT" + Mode:Master + Frequency:2.412 GHz + Quality:19/80 Signal level=-81 dBm Noise level:0 dBm + Encryption key:on + Bit Rates:5.5 Mb/s; 6 Mb/s; 9 Mb/s; 11 Mb/s; 12 Mb/s + 18 Mb/s; 24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s + IE: IEEE 802.11i/WPA2 Version 1 + Group Cipher : CCMP + Pairwise Ciphers (1) : CCMP + Authentication Suites (1) : PSK + Preauthentication Supported + +Find the ESSID desired, which may have multiple Addresses (BSSID). Also +observe the frequency. Select the BSSID (address) with the highest +"signal level" at the desired "frequency". + +Operation with no parameters: + +Environmental variables: + BTADDR Bluetooth MAC address of remote + BTCHAN Bluetooth Channel of service + WIFIURL WiFi URL of file to retrieve. + WIFIFILE WiFi File name of retrieved file to delete. + WPA_CONFIG Config file for wpa_supplicant. + +None of the parameters above are required. + + BTADDR and BTCHAN are searched, but specifying parameters is faster. + WIFIURL defaults to http://www.multitech.net/mlinux/feeds/3.2/arm926ejste/nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk + WIFIFILE defaults to nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk + WPA_CONFIG defaults to /etc/wpa_supplicant/wifitest.conf + + Two get a specific frequency at Multitech, since the same SID is used at + multiple frequencies, the BSSID must be provided in the WPA configuration + file.
\ No newline at end of file |