Add new BSP submodule for Atmel Processors.5.3.0b5.3.0a

1 files changed, 53 insertions, 0 deletions

diff --git a/recipes-kernel/rs9113/files/immunity/readme.txt b/recipes-kernel/rs9113/files/immunity/readme.txt
new file mode 100644
index 0000000..5dfcfde
--- /dev/null
+++ b/recipes-kernel/rs9113/files/immunity/readme.txt
@@ -0,0 +1,53 @@
+For wifi initialization to find the best BSSID's for testing:
+ /opt/immunity/tworadio.sh wifisetup
+
+Expect this in the output:
+ udhcpc (v1.22.1) started
+ Sending discover...
+ Sending discover...
+ Sending discover...
+ No lease, failing
+
+After doing wifisetup, it is possible to do a scan.
+
+ iwlist wifi0 scanning
+ 
+This produces a list:
+ wifi0     Scan completed :
+          Cell 01 - Address: 00:27:0D:8C:57:28
+                    ESSID:"MTS-IT"
+                    Mode:Master
+                    Frequency:2.412 GHz
+                    Quality:19/80  Signal level=-81 dBm  Noise level:0 dBm
+                    Encryption key:on
+                    Bit Rates:5.5 Mb/s; 6 Mb/s; 9 Mb/s; 11 Mb/s; 12 Mb/s
+                              18 Mb/s; 24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
+                    IE: IEEE 802.11i/WPA2 Version 1
+                        Group Cipher : CCMP
+                        Pairwise Ciphers (1) : CCMP
+                        Authentication Suites (1) : PSK
+                       Preauthentication Supported
+
+Find the ESSID desired, which may have multiple Addresses (BSSID).  Also
+observe the frequency.  Select the BSSID (address) with the highest
+"signal level" at the desired "frequency".
+
+Operation with no parameters:
+ 
+Environmental variables:
+ BTADDR     Bluetooth MAC address of remote
+ BTCHAN     Bluetooth Channel of service
+ WIFIURL    WiFi URL of file to retrieve.
+ WIFIFILE   WiFi File name of retrieved file to delete.
+ WPA_CONFIG Config file for wpa_supplicant.
+
+None of the parameters above are required.
+
+ BTADDR and BTCHAN are searched, but specifying parameters is faster.
+ WIFIURL defaults to http://www.multitech.net/mlinux/feeds/3.2/arm926ejste/nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk
+ WIFIFILE defaults to nodejs-dbg_0.10.44-r1.3.0_arm926ejste.ipk
+ WPA_CONFIG defaults to /etc/wpa_supplicant/wifitest.conf
+
+ Two get a specific frequency at Multitech, since the same SID is used at
+ multiple frequencies, the BSSID must be provided in the WPA configuration
+ file.
\ No newline at end of file