summaryrefslogtreecommitdiff
path: root/recipes-kernel/linux/linux-at91-4.9.87/mtr/linux-4.9-mtr-device-tree.patch
diff options
context:
space:
mode:
authorJohn Klug <john.klug@multitech.com>2020-11-11 16:17:52 -0600
committerJohn Klug <john.klug@multitech.com>2020-11-11 16:17:52 -0600
commit4bb6f26b05450777d14aa96e10783066c2503dc2 (patch)
tree3ed6c4bb86736d28926fd37a3c2b4eb81de44c82 /recipes-kernel/linux/linux-at91-4.9.87/mtr/linux-4.9-mtr-device-tree.patch
downloadmeta-multitech-atmel-4bb6f26b05450777d14aa96e10783066c2503dc2.tar.gz
meta-multitech-atmel-4bb6f26b05450777d14aa96e10783066c2503dc2.tar.bz2
meta-multitech-atmel-4bb6f26b05450777d14aa96e10783066c2503dc2.zip
Add new BSP submodule for Atmel Processors.5.3.0b5.3.0a
Diffstat (limited to 'recipes-kernel/linux/linux-at91-4.9.87/mtr/linux-4.9-mtr-device-tree.patch')
-rw-r--r--recipes-kernel/linux/linux-at91-4.9.87/mtr/linux-4.9-mtr-device-tree.patch564
1 files changed, 564 insertions, 0 deletions
diff --git a/recipes-kernel/linux/linux-at91-4.9.87/mtr/linux-4.9-mtr-device-tree.patch b/recipes-kernel/linux/linux-at91-4.9.87/mtr/linux-4.9-mtr-device-tree.patch
new file mode 100644
index 0000000..659931d
--- /dev/null
+++ b/recipes-kernel/linux/linux-at91-4.9.87/mtr/linux-4.9-mtr-device-tree.patch
@@ -0,0 +1,564 @@
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/mtr.dts linux-4.9.87/arch/arm/boot/dts/mtr.dts
+--- linux-4.9.87.orig/arch/arm/boot/dts/mtr.dts 1969-12-31 18:00:00.000000000 -0600
++++ linux-4.9.87/arch/arm/boot/dts/mtr.dts 2019-01-03 15:17:51.799576663 -0600
+@@ -0,0 +1,287 @@
++/*
++ * DTS file for Multi-Tech Systems mtr Hardware
++ *
++ * Copyright (C) 2016 by Multi-Tech Systems,
++ *
++ * Licensed under GPLv2 or later.
++ */
++
++/dts-v1/;
++#include "at91sam9g25.dtsi"
++#include "at91sam9x5ek.dtsi"
++
++/ {
++ model = "Multi-Tech Systems MTR";
++ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
++ aliases {
++ serial1 = &uart0;
++ };
++
++ chosen {
++ bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2";
++ };
++
++ memory {
++ reg = <0x20000000 0x8000000>;
++ };
++
++ clocks {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ main_clock: clock@0 {
++ compatible = "atmel,osc", "fixed-clock";
++ clock-frequency = <12000000>;
++ };
++ };
++
++ ahb {
++ apb {
++ /delete-node/ spi@f0004000;
++ macb0: ethernet@f802c000 {
++ phy-mode = "mii";
++ status = "okay";
++ };
++
++ mmc0: mmc@f0008000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <
++ &pinctrl_board_mmc0
++ &pinctrl_mmc0_slot0_clk_cmd_dat0
++ &pinctrl_mmc0_slot0_dat1_3>;
++ status = "okay";
++ always_present;
++ cd-permanent;
++ slot@0 {
++ compatible = "ti,wl1271";
++ reg = <2>; /* Card function */
++ bus-width = <4>;
++ non-removeable;
++ status = "okay";
++ interrupt-parent = <&pioA>;
++ interrupts = <26 IRQ_TYPE_EDGE_RISING>; /* PA26 - REQUIRED */
++ ref-clock-frequency = <38400000>; /* 2 = 38.4MHz */
++ platform-quirks = <0x1>; /* 1 = Edge IRQ */
++ slot-id = <0>; /* Atmel MCI driver fix */
++ };
++ };
++
++ pinctrl@fffff400 {
++ mmc0 {
++ pinctrl_board_mmc0: mmc0-board {
++ atmel,pins =
++ <AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH /* PA26 gpio A int pin deglitch (external PU) */
++ AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
++ };
++ };
++
++ nand {
++ pinctrl_nand: nand-0 {
++ atmel,pins =
++ <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A Read Enable */
++ AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD1 periph A Write Enable */
++ AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A Address Latch Enable */
++ AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A Command Latch Enable */
++ AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */
++ AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PC31 gpio RDY/BUSY pin pull_up */
++ AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A Data bit 0 */
++ AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A Data bit 1 */
++ AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD8 periph A Data bit 2 */
++ AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD9 periph A Data bit 3 */
++ AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD10 periph A Data bit 4 */
++ AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD11 periph A Data bit 5 */
++ AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD12 periph A Data bit 6 */
++ AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD13 periph A Data bit 7 */
++ };
++
++ /delete-node/ nand_16bits-0;
++ };
++
++ /delete-node/ spi1;
++
++ /*
++ * Pin A23 will be left floating when the power goes off on the radio.
++ * We need to pull it down to ensure it is low during radio power-off.
++ * pinctrl is loaded during the call to platform_device_register() in mts-io.
++ * If we need to customize this for various hardware revisions, these can
++ * be loaded as overlays prior to loading the mts-io module, overwriting the
++ * atmel,pins section.
++ */
++ mts_io {
++ pinctrl_mts_io: mts_io-0 {
++ atmel,pins =
++ <AT91_PIOA 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA21 GPIO pull-up radio-power */
++ AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PA22 GPIO pull-up radio-reset */
++ AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* PA23 GPIO pull-down radio-monitor */
++ };
++ };
++
++ 1wire_cm {
++ pinctrl_1wire_cm: 1wire_cm-0 {
++ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
++ };
++ };
++ };
++
++ rtc@fffffeb0 {
++ status = "okay";
++ };
++
++ dbgu: serial@fffff200 {
++ status = "okay";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ };
++
++ spi@f0000000 {
++ /delete-node/ m25p80@0;
++ };
++
++ /delete-node/ serial@f801c000;
++
++ uart0: serial@f8040000 {
++ status = "okay";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(11)>,
++ <&dma0 1 (AT91_DMA_CFG_PER_ID(12) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
++ dma-names = "tx", "rx";
++ };
++
++ usb2: gadget@f803c000 {
++ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++ };
++ watchdog@fffffe40 {
++ status = "okay";
++ };
++ };
++
++ nand0: nand@40000000 {
++ nand-bus-width = <8>;
++ nand-ecc-mode = "hw";
++ atmel,has-pmecc; /* Enable PMECC */
++ atmel,pmecc-sector-size = <512>;
++ status = "okay";
++ reg = < 0x40000000 0x10000000
++ 0xffffe000 0x600 /* PMECC Registers */
++ 0xffffe600 0x200 /* PMECC Error Location Registers */
++ 0x00100000 0x100000 /* PMECC looup table in ROM code */
++ >;
++ atmel,pmecc-lookup-table-offset = <0x8000 0x10000>;
++ gpios = < &pioC 31 GPIO_ACTIVE_HIGH
++ &pioD 4 GPIO_ACTIVE_HIGH
++ 0
++ >;
++ atmel,pmecc-cap = <4>;
++ atmel,nand-has-dma;
++
++ nand@0 {
++ label = "NANDFlash";
++ reg = <0x0 0x10000000>;
++ };
++ at91bootstrap@0 {
++ label = "at91bootstrap";
++ reg = <0x0 0x40000>;
++ };
++ uboot@40000 {
++ label = "u-Boot";
++ reg = <0x40000 0x80000>;
++ };
++ ubootconfig0@c0000 {
++ label = "u-Boot Config";
++ reg = <0xc0000 0xa0000>;
++ };
++ ubootconfig1@160000 {
++ label = "u-Boot Redundant Config";
++ reg = <0x160000 0xa0000>;
++ };
++ uImage@200000 {
++ label = "uImage";
++ reg = <0x200000 0x600000>;
++ };
++ config0@800000 {
++ label = "Config";
++ reg = <0x800000 0x800000>;
++ };
++ config1@1000000 {
++ label = "OEM Config";
++ reg = <0x1000000 0x800000>;
++ };
++ rootfs@1800000 {
++ label = "Rootfs";
++ reg = <0x1800000 0x8000000>;
++ };
++ user@9800000 {
++ label = "User data";
++ reg = <0x9800000 0x6800000>;
++ };
++ };
++
++ usb0: ohci@00600000 {
++ status = "okay";
++ num-ports = <3>;
++ };
++
++ usb1: ehci@00700000 {
++ status = "okay";
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ pc21 {
++ label = "led-status";
++ gpios = <&pioC 21 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-on";
++ };
++ pc15 {
++ label = "led-b";
++ gpios = <&pioC 15 GPIO_ACTIVE_LOW>;
++ };
++ pc20 {
++ label = "led-c";
++ gpios = <&pioC 20 GPIO_ACTIVE_LOW>;
++ };
++ pc19 {
++ label = "led-d";
++ gpios = <&pioC 19 GPIO_ACTIVE_LOW>;
++ };
++ pc18 {
++ label = "led-e";
++ gpios = <&pioC 18 GPIO_ACTIVE_LOW>;
++ };
++ pc17 {
++ label = "led-f";
++ gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ i2c-gpio-0 {
++ status = "okay";
++
++ id_eeprom@56 {
++ compatible = "atmel,24c04";
++ reg = <0x56>;
++ pagesize = <16>;
++ status = "okay";
++ };
++ };
++
++ 1wire_cm {
++ compatible = "w1-gpio";
++ gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
++ linux,open-drain;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_1wire_cm>;
++ status = "okay";
++ };
++ mts-io-0 {
++ status = "okay";
++ compatible = "mts,mts-io";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mts_io>;
++ };
++};
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5cm.dtsi linux-4.9.87/arch/arm/boot/dts/at91sam9x5cm.dtsi
+--- linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5cm.dtsi 2019-01-03 15:21:25.339570341 -0600
++++ linux-4.9.87/arch/arm/boot/dts/at91sam9x5cm.dtsi 2019-01-03 15:17:51.911576659 -0600
+@@ -43,48 +43,8 @@
+ atmel,has-pmecc; /* Enable PMECC */
+ atmel,pmecc-cap = <2>;
+ atmel,pmecc-sector-size = <512>;
+- nand-on-flash-bbt;
++ /* nand-on-flash-bbt; */
+ status = "okay";
+-
+- at91bootstrap@0 {
+- label = "at91bootstrap";
+- reg = <0x0 0x40000>;
+- };
+-
+- uboot@40000 {
+- label = "u-boot";
+- reg = <0x40000 0x80000>;
+- };
+-
+- ubootenv@c0000 {
+- label = "U-Boot Env";
+- reg = <0xc0000 0x140000>;
+- };
+-
+- kernel@200000 {
+- label = "kernel";
+- reg = <0x200000 0x600000>;
+- };
+-
+- rootfs@800000 {
+- label = "rootfs";
+- reg = <0x800000 0x1f800000>;
+- };
+- };
+- };
+-
+- leds {
+- compatible = "gpio-leds";
+-
+- pb18 {
+- label = "pb18";
+- gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+- linux,default-trigger = "heartbeat";
+- };
+-
+- pd21 {
+- label = "pd21";
+- gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+@@ -96,5 +56,4 @@
+ pinctrl-0 = <&pinctrl_1wire_cm>;
+ status = "okay";
+ };
+-
+ };
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5ek.dtsi linux-4.9.87/arch/arm/boot/dts/at91sam9x5ek.dtsi
+--- linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5ek.dtsi 2019-01-03 15:21:25.339570341 -0600
++++ linux-4.9.87/arch/arm/boot/dts/at91sam9x5ek.dtsi 2019-01-03 15:17:51.911576659 -0600
+@@ -25,23 +25,11 @@
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
++ /* external micro SD slot */
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+- cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+- };
+- };
+-
+- mmc1: mmc@f000c000 {
+- pinctrl-0 = <
+- &pinctrl_board_mmc1
+- &pinctrl_mmc1_slot0_clk_cmd_dat0
+- &pinctrl_mmc1_slot0_dat1_3>;
+- status = "okay";
+- slot@0 {
+- reg = <0>;
+- bus-width = <4>;
+- cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
++ cd-gpios = <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+@@ -58,25 +46,12 @@
+ usb2: gadget@f803c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_board_usb2>;
+- atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+- status = "okay";
+- };
+-
+- i2c0: i2c@f8010000 {
+- status = "okay";
+-
+- wm8731: wm8731@1a {
+- compatible = "wm8731";
+- reg = <0x1a>;
+- };
+- };
+-
+- adc0: adc@f804c000 {
+- atmel,adc-ts-wires = <4>;
+- atmel,adc-ts-pressure-threshold = <10000>;
++ /* atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; mtcdt: no vbus-gpio */
+ status = "okay";
+ };
+
++ /* A/D convertor is unusable on Conduit */
++
+ pinctrl@fffff400 {
+ camera_sensor {
+ pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+@@ -118,7 +93,7 @@
+ };
+
+ spi0: spi@f0000000 {
+- status = "disabled"; /* conflict with mmc1 */
++ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+@@ -131,37 +106,20 @@
+ status = "okay";
+ };
+
+- ssc0: ssc@f0010000 {
+- status = "okay";
+- };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <3>;
+- atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+- &pioD 19 GPIO_ACTIVE_LOW
+- &pioD 20 GPIO_ACTIVE_LOW
+- >;
++ //mtcdt: no vbus-gpio
++ // atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
++ // &pioD 19 GPIO_ACTIVE_LOW
++ // &pioD 20 GPIO_ACTIVE_LOW
++ // >;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+-
+- sound {
+- compatible = "atmel,sam9x5-wm8731-audio";
+-
+- atmel,model = "wm8731 @ AT91SAM9X5EK";
+-
+- atmel,audio-routing =
+- "Headphone Jack", "RHPOUT",
+- "Headphone Jack", "LHPOUT",
+- "LLINEIN", "Line In Jack",
+- "RLINEIN", "Line In Jack";
+-
+- atmel,ssc-controller = <&ssc0>;
+- atmel,audio-codec = <&wm8731>;
+- };
+ };
+
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/Makefile linux-4.9.87/arch/arm/boot/dts/Makefile
+--- linux-4.9.87.orig/arch/arm/boot/dts/Makefile 2019-01-03 15:21:25.339570341 -0600
++++ linux-4.9.87/arch/arm/boot/dts/Makefile 2019-01-03 15:17:51.911576659 -0600
+@@ -43,7 +43,8 @@
+ at91sam9g25ek.dtb \
+ at91sam9g35ek.dtb \
+ at91sam9x25ek.dtb \
+- at91sam9x35ek.dtb
++ at91sam9x35ek.dtb \
++ mtr.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-kizbox2.dtb \
+ at91-sama5d2_ptc_ek.dtb \
+diff -Naru linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5.dtsi linux-4.9.87/arch/arm/boot/dts/at91sam9x5.dtsi
+--- linux-4.9.87.orig/arch/arm/boot/dts/at91sam9x5.dtsi 2019-01-03 15:21:25.339570341 -0600
++++ linux-4.9.87/arch/arm/boot/dts/at91sam9x5.dtsi 2019-01-03 15:17:51.911576659 -0600
+@@ -32,9 +32,6 @@
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+- i2c0 = &i2c0;
+- i2c1 = &i2c1;
+- i2c2 = &i2c2;
+ ssc0 = &ssc0;
+ pwm0 = &pwm0;
+ };
+@@ -963,50 +960,7 @@
+ status = "disabled";
+ };
+
+- i2c0: i2c@f8010000 {
+- compatible = "atmel,at91sam9x5-i2c";
+- reg = <0xf8010000 0x100>;
+- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+- dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+- <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+- dma-names = "tx", "rx";
+- #address-cells = <1>;
+- #size-cells = <0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c0>;
+- clocks = <&twi0_clk>;
+- status = "disabled";
+- };
+-
+- i2c1: i2c@f8014000 {
+- compatible = "atmel,at91sam9x5-i2c";
+- reg = <0xf8014000 0x100>;
+- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+- dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+- <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+- dma-names = "tx", "rx";
+- #address-cells = <1>;
+- #size-cells = <0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c1>;
+- clocks = <&twi1_clk>;
+- status = "disabled";
+- };
+-
+- i2c2: i2c@f8018000 {
+- compatible = "atmel,at91sam9x5-i2c";
+- reg = <0xf8018000 0x100>;
+- interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+- dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+- <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+- dma-names = "tx", "rx";
+- #address-cells = <1>;
+- #size-cells = <0>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_i2c2>;
+- clocks = <&twi2_clk>;
+- status = "disabled";
+- };
++ /* /delete_node/ command does not work. */
+
+ uart0: serial@f8040000 {
+ compatible = "atmel,at91sam9260-usart";
+diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
+index d3fa60aa..0fcaa00a 100644
+--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
++++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
+@@ -19,20 +19,6 @@
+
+ ahb {
+ apb {
+- mmc0: mmc@f0008000 {
+- pinctrl-0 = <
+- &pinctrl_board_mmc0
+- &pinctrl_mmc0_slot0_clk_cmd_dat0
+- &pinctrl_mmc0_slot0_dat1_3>;
+- status = "okay";
+- /* external micro SD slot */
+- slot@0 {
+- reg = <0>;
+- bus-width = <4>;
+- cd-gpios = <&pioA 1 GPIO_ACTIVE_HIGH>;
+- };
+- };
+-
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };