From 2b06fd93e6c522d0a1896536a5f6b2c428007e6e Mon Sep 17 00:00:00 2001 From: Jesse Gilles Date: Mon, 27 Apr 2015 16:01:22 -0500 Subject: add monit 5.12.2 recipe --- recipes-extended/monit/monit/monit.default | 2 + recipes-extended/monit/monit/monit.init | 37 ++++ recipes-extended/monit/monit/monitrc | 272 +++++++++++++++++++++++++++++ recipes-extended/monit/monit_5.12.2.bb | 38 ++++ 4 files changed, 349 insertions(+) create mode 100644 recipes-extended/monit/monit/monit.default create mode 100755 recipes-extended/monit/monit/monit.init create mode 100644 recipes-extended/monit/monit/monitrc create mode 100644 recipes-extended/monit/monit_5.12.2.bb (limited to 'recipes-extended') diff --git a/recipes-extended/monit/monit/monit.default b/recipes-extended/monit/monit/monit.default new file mode 100644 index 0000000..0f92640 --- /dev/null +++ b/recipes-extended/monit/monit/monit.default @@ -0,0 +1,2 @@ +# set to "yes" or "no" to control starting on boot +ENABLED="no" diff --git a/recipes-extended/monit/monit/monit.init b/recipes-extended/monit/monit/monit.init new file mode 100755 index 0000000..0a3c2ea --- /dev/null +++ b/recipes-extended/monit/monit/monit.init @@ -0,0 +1,37 @@ +#!/bin/sh + +NAME=monit + +ENABLED=yes +[ -f /etc/default/$NAME ] && . /etc/default/$NAME + +if [ "$ENABLED" != "yes" ]; then + echo "$NAME: disabled in /etc/default" + exit +fi + +case $1 in + start) + echo "Starting monit" + monit + ;; + + stop) + echo "Stopping monit" + monit quit + ;; + + restart) + echo "Stopping monit" + monit quit + echo "Starting monit" + monit + ;; + + *) + echo "Usage: $0 {start|stop|restart}" + exit 2 + ;; +esac + + diff --git a/recipes-extended/monit/monit/monitrc b/recipes-extended/monit/monit/monitrc new file mode 100644 index 0000000..d04b115 --- /dev/null +++ b/recipes-extended/monit/monit/monitrc @@ -0,0 +1,272 @@ +############################################################################### +## Monit control file +############################################################################### +## +## Comments begin with a '#' and extend through the end of the line. Keywords +## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'. +## +## Below you will find examples of some frequently used statements. For +## information about the control file and a complete list of statements and +## options, please have a look in the Monit manual. +## +## +############################################################################### +## Global section +############################################################################### +## +## Start Monit in the background (run as a daemon): +# +set daemon 30 # check services at 30 seconds intervals +# with start delay 240 # optional: delay the first check by 4-minutes (by +# # default Monit check immediately after Monit start) +# +# +## Set syslog logging with the 'daemon' facility. If the FACILITY option is +## omitted, Monit will use 'user' facility by default. If you want to log to +## a standalone log file instead, specify the full path to the log file +# +set logfile syslog facility log_daemon +# +# +## Set the location of the Monit lock file which stores the process id of the +## running Monit instance. By default this file is stored in $HOME/.monit.pid +# +# set pidfile /var/run/monit.pid +# +## Set the location of the Monit id file which stores the unique id for the +## Monit instance. The id is generated and stored on first Monit start. By +## default the file is placed in $HOME/.monit.id. +# +# set idfile /var/.monit.id +# +## Set the location of the Monit state file which saves monitoring states +## on each cycle. By default the file is placed in $HOME/.monit.state. If +## the state file is stored on a persistent filesystem, Monit will recover +## the monitoring state across reboots. If it is on temporary filesystem, the +## state will be lost on reboot which may be convenient in some situations. +# +# set statefile /var/.monit.state +# +## Set the list of mail servers for alert delivery. Multiple servers may be +## specified using a comma separator. If the first mail server fails, Monit +# will use the second mail server in the list and so on. By default Monit uses +# port 25 - it is possible to override this with the PORT option. +# +# set mailserver mail.bar.baz, # primary mailserver +# backup.bar.baz port 10025, # backup mailserver on port 10025 +# localhost # fallback relay +# +# +## By default Monit will drop alert events if no mail servers are available. +## If you want to keep the alerts for later delivery retry, you can use the +## EVENTQUEUE statement. The base directory where undelivered alerts will be +## stored is specified by the BASEDIR option. You can limit the queue size +## by using the SLOTS option (if omitted, the queue is limited by space +## available in the back end filesystem). +# +# set eventqueue +# basedir /var/monit # set the base directory where events will be stored +# slots 100 # optionally limit the queue size +# +# +## Send status and events to M/Monit (for more informations about M/Monit +## see http://mmonit.com/). By default Monit registers credentials with +## M/Monit so M/Monit can smoothly communicate back to Monit and you don't +## have to register Monit credentials manually in M/Monit. It is possible to +## disable credential registration using the commented out option below. +## Though, if safety is a concern we recommend instead using https when +## communicating with M/Monit and send credentials encrypted. +# +# set mmonit http://monit:monit@192.168.1.10:8080/collector +# # and register without credentials # Don't register credentials +# +# +## Monit by default uses the following format for alerts if the the mail-format +## statement is missing:: +## --8<-- +## set mail-format { +## from: monit@$HOST +## subject: monit alert -- $EVENT $SERVICE +## message: $EVENT Service $SERVICE +## Date: $DATE +## Action: $ACTION +## Host: $HOST +## Description: $DESCRIPTION +## +## Your faithful employee, +## Monit +## } +## --8<-- +## +## You can override this message format or parts of it, such as subject +## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc. +## are expanded at runtime. For example, to override the sender, use: +# +# set mail-format { from: monit@foo.bar } +# +# +## You can set alert recipients whom will receive alerts if/when a +## service defined in this file has errors. Alerts may be restricted on +## events by using a filter as in the second example below. +# +# set alert sysadm@foo.bar # receive all alerts +# +## Do not alert when Monit starts, stops or performs a user initiated action. +## This filter is recommended to avoid getting alerts for trivial cases. +# +# set alert your-name@your.domain not on { instance, action } +# +# +## Monit has an embedded HTTP interface which can be used to view status of +## services monitored and manage services from a web interface. The HTTP +## interface is also required if you want to issue Monit commands from the +## command line, such as 'monit status' or 'monit restart service' The reason +## for this is that the Monit client uses the HTTP interface to send these +## commands to a running Monit daemon. See the Monit Wiki if you want to +## enable SSL for the HTTP interface. +# +set httpd port 2812 and + use address localhost # only accept connection from localhost + allow localhost # allow localhost to connect to the server and + allow admin:monit # require user 'admin' with password 'monit' + +############################################################################### +## Services +############################################################################### +## +## Check general system resources such as load average, cpu and memory +## usage. Each test specifies a resource, conditions and the action to be +## performed should a test fail. +# +# check system myhost.mydomain.tld +# if loadavg (1min) > 4 then alert +# if loadavg (5min) > 2 then alert +# if memory usage > 75% then alert +# if swap usage > 25% then alert +# if cpu usage (user) > 70% then alert +# if cpu usage (system) > 30% then alert +# if cpu usage (wait) > 20% then alert +# +# +## Check if a file exists, checksum, permissions, uid and gid. In addition +## to alert recipients in the global section, customized alert can be sent to +## additional recipients by specifying a local alert handler. The service may +## be grouped using the GROUP option. More than one group can be specified by +## repeating the 'group name' statement. +# +# check file apache_bin with path /usr/local/apache/bin/httpd +# if failed checksum and +# expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor +# if failed permission 755 then unmonitor +# if failed uid root then unmonitor +# if failed gid root then unmonitor +# alert security@foo.bar on { +# checksum, permission, uid, gid, unmonitor +# } with the mail-format { subject: Alarm! } +# group server +# +# +## Check that a process is running, in this case Apache, and that it respond +## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory, +## and number of children. If the process is not running, Monit will restart +## it by default. In case the service is restarted very often and the +## problem remains, it is possible to disable monitoring using the TIMEOUT +## statement. This service depends on another service (apache_bin) which +## is defined above. +# +# check process apache with pidfile /usr/local/apache/logs/httpd.pid +# start program = "/etc/init.d/httpd start" with timeout 60 seconds +# stop program = "/etc/init.d/httpd stop" +# if cpu > 60% for 2 cycles then alert +# if cpu > 80% for 5 cycles then restart +# if totalmem > 200.0 MB for 5 cycles then restart +# if children > 250 then restart +# if loadavg(5min) greater than 10 for 8 cycles then stop +# if failed host www.tildeslash.com port 80 protocol http +# and request "/somefile.html" +# then restart +# if failed port 443 type tcpssl protocol http +# with timeout 15 seconds +# then restart +# if 3 restarts within 5 cycles then timeout +# depends on apache_bin +# group server +# +# +## Check filesystem permissions, uid, gid, space and inode usage. Other services, +## such as databases, may depend on this resource and an automatically graceful +## stop may be cascaded to them before the filesystem will become full and data +## lost. +# +# check filesystem datafs with path /dev/sdb1 +# start program = "/bin/mount /data" +# stop program = "/bin/umount /data" +# if failed permission 660 then unmonitor +# if failed uid root then unmonitor +# if failed gid disk then unmonitor +# if space usage > 80% for 5 times within 15 cycles then alert +# if space usage > 99% then stop +# if inode usage > 30000 then alert +# if inode usage > 99% then stop +# group server +# +# +## Check a file's timestamp. In this example, we test if a file is older +## than 15 minutes and assume something is wrong if its not updated. Also, +## if the file size exceed a given limit, execute a script +# +# check file database with path /data/mydatabase.db +# if failed permission 700 then alert +# if failed uid data then alert +# if failed gid data then alert +# if timestamp > 15 minutes then alert +# if size > 100 MB then exec "/my/cleanup/script" as uid dba and gid dba +# +# +## Check directory permission, uid and gid. An event is triggered if the +## directory does not belong to the user with uid 0 and gid 0. In addition, +## the permissions have to match the octal description of 755 (see chmod(1)). +# +# check directory bin with path /bin +# if failed permission 755 then unmonitor +# if failed uid 0 then unmonitor +# if failed gid 0 then unmonitor +# +# +## Check a remote host availability by issuing a ping test and check the +## content of a response from a web server. Up to three pings are sent and +## connection to a port and an application level network check is performed. +# +# check host myserver with address 192.168.1.1 +# if failed ping then alert +# if failed port 3306 protocol mysql with timeout 15 seconds then alert +# if failed port 80 protocol http +# and request /some/path with content = "a string" +# then alert +# +# +## Check a network link status (up/down), link capacity changes, saturation +## and bandwidth usage. +# +# check network public with interface eth0 +# if failed link then alert +# if changed link then alert +# if saturation > 90% then alert +# if download > 10 MB/s then alert +# if total upload > 1 GB in last hour then alert +# +# +## Check custom program status output. +# +# check program myscript with path /usr/local/bin/myscript.sh +# if status != 0 then alert +# +# +############################################################################### +## Includes +############################################################################### +## +## It is possible to include additional configuration parts from other files or +## directories. +# +include /etc/monit.d/* diff --git a/recipes-extended/monit/monit_5.12.2.bb b/recipes-extended/monit/monit_5.12.2.bb new file mode 100644 index 0000000..2774e29 --- /dev/null +++ b/recipes-extended/monit/monit_5.12.2.bb @@ -0,0 +1,38 @@ +DESCRIPTION = "Monit" +HOMEPAGE = "http://mmonit.com/" +LICENSE = "AGPL-3.0" +LIC_FILES_CHKSUM = "file://COPYING;md5=ea116a7defaf0e93b3bb73b2a34a3f51" + +PR = "r1" + +SRC_URI = "http://mmonit.com/monit/dist/monit-5.12.2.tar.gz \ + file://monitrc \ + file://monit.init \ + file://monit.default \ + " + +SRC_URI[md5sum] = "5f5cf4c18b42e8091b49b4e07cf972ce" +SRC_URI[sha256sum] = "8ab0296d1aa2351b1573481592d7b5e06de1edd49dff1b5552839605a450914c" + +inherit autotools + +EXTRA_OECONF_armv5 += "libmonit_cv_setjmp_available=yes libmonit_cv_vsnprintf_c99_conformant=yes" + +inherit update-rc.d + +INITSCRIPT_NAME = "monit" +INITSCRIPT_PARAMS = "defaults 99 10" + +do_install_append() { + install -d ${D}${sysconfdir} + install -d ${D}${sysconfdir}/monit.d + install -m 0600 ${WORKDIR}/monitrc ${D}${sysconfdir}/ + + install -d ${D}${sysconfdir}/init.d + install -m 0755 ${WORKDIR}/monit.init ${D}${sysconfdir}/init.d/monit + + install -d ${D}${sysconfdir}/default + install -m 0644 ${WORKDIR}/monit.default ${D}${sysconfdir}/default/monit +} + +CONFFILES_${PN} += "${sysconfdir}/monitrc ${sysconfdir}/default/monit" -- cgit v1.2.3