meta-mlinux.git - mLinux Distribution Layer

Age	Commit message (Collapse)	Author	Files
2017-11-30	Preserve wifi and bluetooth settings during upgrade.	John Klug	1

2017-10-25	upgrade fails for some cases -- check file name after grep for file3.3.15	John Klug	1

2017-10-06	Add install script check and verify do_flas_upgrade root ownership	John Klug	2

2017-10-06	New package update via tarball	John Klug	1

2017-09-20	Bump level of initscripts -- new level is .30 for three branch	John Klug	1

2017-09-20	Clean up /var/volatile before upgrade	John Klug	1

2017-09-20	Do not do flash upgrade when /var/volatile is full, and blink LEDS	John Klug	1

2017-09-05	Avoid unnecessary chat switches, and less logging	John Klug	2

2017-09-05	Add firmware/Chat script switch	John Klug	1

2017-09-01	Implement automatic switch. Remove non-working parts of bitbake recipe.	John Klug	3

2017-08-31	Add the carrierswitch stuff during boot for mtcap	John Klug	3

2017-08-31	Allow the timeout in the environment.	John Klug	1

2017-08-31	AT&T is default, mlinux-set-apn can be used for non-VZ and non-AT&T.	John Klug	5

2017-08-31	Update README.lna3	John Klug	1

2017-08-31	Default chat is AT&T with LNA3	John Klug	2

2017-08-31	MTCAP LORA configuration table	John Klug	6

2017-08-28	Add user warning in commentary, to not set the APN manually	John Klug	1

2017-08-28	Since Telit LE910-NA1 can have a single firmware, key off of product-id	John Klug	3

2017-08-28	Fix file name mismatch	John Klug	1

2017-08-28	Move fwswitch script to mlinux-scripts, and call it mlinux-switch-cell-fw	John Klug	5

2017-08-28	Make sure radio is ready, and do not assume any particular APN	John Klug	1

2017-08-28	Do not make device checks when firmware SKU # is specified	John Klug	1

2017-08-28	Always clear the APN first for firmware 0, and set the APN last for firmware 0	John Klug	1

2017-08-28	Do not switch the radio on boot, as it might not be ready	John Klug	1

2017-08-28	Put in the correct values for the number of parameters check	John Klug	1

2017-08-25	Add parameter to mlinux-switch-apn	John Klug	1

2017-08-25	Add the mlinux-set-apn script invocation for proper APN	John Klug	1

2017-08-25	Correct the valid firmware image number to 0 and 1	John Klug	1

2017-08-25	Initial integration of cell-radio-fwswitch	John Klug	4

2017-08-25	Script to enable and disable the APN in chat script for LNA3	John Klug	2

2017-08-25	Remove debug code	John Klug	1

2017-08-25	Update mlinux-set-apn for Verizon, and for LNA3 radio.	John Klug	8

2017-08-25	New LNA3 chat scripts.3.3.11	John Klug	2

2017-08-25	lora-packet-forwarder was removed with lora-network-server. Put it back in	John Klug	1

2017-08-24	Removing lora-network-server	John Klug	1

2017-07-28	Do not set Verizon APN	John Klug	1

2017-07-25	Set the revision of eglibc3.3.9	John Klug	1

2017-07-24	Fix the gethostbyname memory leak	John Klug	2

2017-07-14	bump revision level for udev3.3.8	John Klug	1

2017-06-20	Add new radios for Japan	John Klug	1

2017-06-19	Att new LJP1 and LNA3 cellular radios.	John Klug	1

2017-03-16	Correct VAP in comments about DHCP	John Klug	1

2017-03-16	WiFi comments for Conduit refresh and udhcpc_opts parameter	John Klug	1

2017-03-16	Put timeout back. Configure /etc/network/interfaces udhcpc_opts instead	John Klug	1

2017-03-14	Allow u-boot to be reflashed by itsef.	John Klug	1

2017-02-24	Add new packages for future wifi bt feature	John Klug	2

2017-02-24	mtcap:feat: use same network server setup as mtcdt	Brandon Bayer	1

2017-02-17	Fix missing bonding scripts	John Klug	1

2017-02-13	Add bonding ifup ifdown	John Klug	4

2017-02-07	Add ifenslave for ethernet bonding	John Klug	1