summaryrefslogtreecommitdiff
path: root/recipes-support
diff options
context:
space:
mode:
Diffstat (limited to 'recipes-support')
-rw-r--r--recipes-support/dnsmasq/dnsmasq.inc83
-rw-r--r--recipes-support/dnsmasq/dnsmasq_2.78.bb5
-rw-r--r--recipes-support/dnsmasq/files/99_dnsmasq1
-rw-r--r--recipes-support/dnsmasq/files/dnsmasq-noresolvconf.service15
-rw-r--r--recipes-support/dnsmasq/files/dnsmasq-resolvconf-helper62
-rw-r--r--recipes-support/dnsmasq/files/dnsmasq-resolvconf.service17
-rwxr-xr-xrecipes-support/dnsmasq/files/dnsmasq.conf293
-rwxr-xr-xrecipes-support/dnsmasq/files/dnsmasq.resolvconf84
-rw-r--r--recipes-support/dnsmasq/files/init117
9 files changed, 677 insertions, 0 deletions
diff --git a/recipes-support/dnsmasq/dnsmasq.inc b/recipes-support/dnsmasq/dnsmasq.inc
new file mode 100644
index 0000000..9ef54fe
--- /dev/null
+++ b/recipes-support/dnsmasq/dnsmasq.inc
@@ -0,0 +1,83 @@
+SUMMARY = "Lightweight, easy to configure DNS forwarder and DHCP server"
+HOMEPAGE = "http://www.thekelleys.org.uk/dnsmasq/doc.html"
+SECTION = "net"
+# GPLv3 was added in version 2.41 as license option
+LICENSE = "GPLv2 | GPLv3"
+LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
+ file://COPYING-v3;md5=d32239bcb673463ab874e80d47fae504"
+
+#at least versions 2.15 and prior are moved to the archive folder on the server
+SRC_URI = "http://www.thekelleys.org.uk/dnsmasq/${@['archive/', ''][float(d.getVar('PV',1).split('.')[1]) > 15]}dnsmasq-${PV}.tar.gz;name=dnsmasq-${PV} \
+ file://init \
+ file://dnsmasq.conf \
+ file://dnsmasq-resolvconf.service \
+ file://dnsmasq-noresolvconf.service \
+"
+
+inherit pkgconfig update-rc.d systemd
+
+INITSCRIPT_NAME = "dnsmasq"
+INITSCRIPT_PARAMS = "defaults"
+
+PACKAGECONFIG ?= ""
+PACKAGECONFIG[dbus] = ",,dbus"
+PACKAGECONFIG[idn] = ",,libidn"
+PACKAGECONFIG[conntrack] = ",,libnetfilter-conntrack"
+PACKAGECONFIG[lua] = ",,lua"
+PACKAGECONFIG[resolvconf] = ",,,resolvconf"
+EXTRA_OEMAKE = "\
+ 'COPTS=${@bb.utils.contains('PACKAGECONFIG', 'dbus', '-DHAVE_DBUS', '', d)} \
+ ${@bb.utils.contains('PACKAGECONFIG', 'idn', '-DHAVE_IDN', '', d)} \
+ ${@bb.utils.contains('PACKAGECONFIG', 'conntrack', '-DHAVE_CONNTRACK', '', d)} \
+ ${@bb.utils.contains('PACKAGECONFIG', 'lua', '-DHAVE_LUASCRIPT', '', d)}' \
+ 'CFLAGS=${CFLAGS}' \
+ 'LDFLAGS=${LDFLAGS}' \
+"
+
+SRC_URI += "${@bb.utils.contains('PACKAGECONFIG', 'resolvconf', 'file://dnsmasq.resolvconf file://99_dnsmasq file://dnsmasq-resolvconf-helper', '', d)}"
+
+do_compile_append() {
+ # build dhcp_release
+ cd ${S}/contrib/lease-tools
+ oe_runmake
+}
+
+do_install () {
+ oe_runmake "PREFIX=${D}${prefix}" \
+ "BINDIR=${D}${bindir}" \
+ "MANDIR=${D}${mandir}" \
+ install
+ install -d ${D}${sysconfdir}/ ${D}${sysconfdir}/init.d ${D}${sysconfdir}/dnsmasq.d
+ install -m 644 ${WORKDIR}/dnsmasq.conf ${D}${sysconfdir}/
+ install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/dnsmasq
+
+ install -d ${D}${systemd_unitdir}/system
+
+ if [ "${@bb.utils.contains('PACKAGECONFIG', 'resolvconf', 'resolvconf', '', d)}" != "" ]; then
+ install -m 0644 ${WORKDIR}/dnsmasq-resolvconf.service ${D}${systemd_unitdir}/system/dnsmasq.service
+ else
+ install -m 0644 ${WORKDIR}/dnsmasq-noresolvconf.service ${D}${systemd_unitdir}/system/dnsmasq.service
+ fi
+
+ install -m 0755 ${S}/contrib/lease-tools/dhcp_release ${D}${bindir}
+
+ if [ "${@bb.utils.contains('PACKAGECONFIG', 'dbus', 'dbus', '', d)}" != "" ]; then
+ install -d ${D}${sysconfdir}/dbus-1/system.d
+ install -m 644 dbus/dnsmasq.conf ${D}${sysconfdir}/dbus-1/system.d/
+ fi
+ if [ "${@bb.utils.contains('PACKAGECONFIG', 'resolvconf', 'resolvconf', '', d)}" != "" ]; then
+ install -d ${D}${sysconfdir}/resolvconf/update.d/
+ install -m 0755 ${WORKDIR}/dnsmasq.resolvconf ${D}${sysconfdir}/resolvconf/update.d/dnsmasq
+
+ install -d ${D}${sysconfdir}/default/volatiles
+ install -m 0644 ${WORKDIR}/99_dnsmasq ${D}${sysconfdir}/default/volatiles
+ install -m 0755 ${WORKDIR}/dnsmasq-resolvconf-helper ${D}${bindir}
+ fi
+}
+
+CONFFILES_${PN} = "${sysconfdir}/dnsmasq.conf"
+
+RPROVIDES_${PN} += "${PN}-systemd"
+RREPLACES_${PN} += "${PN}-systemd"
+RCONFLICTS_${PN} += "${PN}-systemd"
+SYSTEMD_SERVICE_${PN} = "dnsmasq.service"
diff --git a/recipes-support/dnsmasq/dnsmasq_2.78.bb b/recipes-support/dnsmasq/dnsmasq_2.78.bb
new file mode 100644
index 0000000..a2641f1
--- /dev/null
+++ b/recipes-support/dnsmasq/dnsmasq_2.78.bb
@@ -0,0 +1,5 @@
+require dnsmasq.inc
+
+SRC_URI[dnsmasq-2.78.md5sum] = "3bb97f264c73853f802bf70610150788"
+SRC_URI[dnsmasq-2.78.sha256sum] = "c92e5d78aa6353354d02aabf74590d08980bb1385d8a00b80ef9bc80430aa1dc"
+
diff --git a/recipes-support/dnsmasq/files/99_dnsmasq b/recipes-support/dnsmasq/files/99_dnsmasq
new file mode 100644
index 0000000..f52ce4e
--- /dev/null
+++ b/recipes-support/dnsmasq/files/99_dnsmasq
@@ -0,0 +1 @@
+d root root 0755 /run/dnsmasq none
diff --git a/recipes-support/dnsmasq/files/dnsmasq-noresolvconf.service b/recipes-support/dnsmasq/files/dnsmasq-noresolvconf.service
new file mode 100644
index 0000000..0c64fab
--- /dev/null
+++ b/recipes-support/dnsmasq/files/dnsmasq-noresolvconf.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=DNS forwarder and DHCP server
+After=network.target
+
+[Service]
+Type=forking
+PIDFile=/run/dnsmasq.pid
+ExecStartPre=/usr/bin/dnsmasq --test
+ExecStart=/usr/bin/dnsmasq -x /run/dnsmasq.pid -7 /etc/dnsmasq.d --local-service
+ExecStop=/bin/kill $MAINPID
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target
+
diff --git a/recipes-support/dnsmasq/files/dnsmasq-resolvconf-helper b/recipes-support/dnsmasq/files/dnsmasq-resolvconf-helper
new file mode 100644
index 0000000..db54d46
--- /dev/null
+++ b/recipes-support/dnsmasq/files/dnsmasq-resolvconf-helper
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Borrowing heavily from the dnsmasq initscript's version of support for
+# resolvconf, intended for use in systemd-only configurations.
+#
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/dnsmasq
+NAME=dnsmasq
+
+# Most configuration options in /etc/default/dnsmasq are deprecated
+# but still honoured.
+if [ -r /etc/default/$NAME ]; then
+ . /etc/default/$NAME
+fi
+
+start_resolvconf()
+{
+ # If interface "lo" is explicitly disabled in /etc/default/dnsmasq
+ # Then dnsmasq won't be providing local DNS, so don't add it to
+ # the resolvconf server set.
+ for interface in $DNSMASQ_EXCEPT
+ do
+ [ $interface = lo ] && return
+ done
+
+ if [ -x /sbin/resolvconf ] ; then
+ echo "nameserver 127.0.0.1" |
+ /sbin/resolvconf -a lo.$NAME
+ fi
+ return 0
+}
+
+stop_resolvconf()
+{
+ if [ -x /sbin/resolvconf ] ; then
+ /sbin/resolvconf -d lo.$NAME
+ fi
+ return 0
+}
+
+case "$1" in
+ start)
+ start_resolvconf
+ exit 0
+ ;;
+ stop)
+ stop_resolvconf
+ exit 0
+ ;;
+ restart)
+ stop_resolvconf
+ start_resolvconf
+ exit 0
+ ;;
+ *)
+ echo "Usage: /etc/init.d/$NAME {start|stop|restart}" >&2
+ exit 3
+ ;;
+esac
+
+exit 0
+
diff --git a/recipes-support/dnsmasq/files/dnsmasq-resolvconf.service b/recipes-support/dnsmasq/files/dnsmasq-resolvconf.service
new file mode 100644
index 0000000..2980f7d
--- /dev/null
+++ b/recipes-support/dnsmasq/files/dnsmasq-resolvconf.service
@@ -0,0 +1,17 @@
+[Unit]
+Description=DNS forwarder and DHCP server
+After=network.target
+
+[Service]
+Type=forking
+PIDFile=/run/dnsmasq.pid
+ExecStartPre=/usr/bin/dnsmasq --test
+ExecStart=/usr/bin/dnsmasq -x /run/dnsmasq.pid -7 /etc/dnsmasq.d --local-service
+ExecStartPost=/usr/bin/dnsmasq-resolvconf-helper start
+ExecStopPre=/usr/bin/dnsmasq-resolvconf-helper stop
+ExecStop=/bin/kill $MAINPID
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target
+
diff --git a/recipes-support/dnsmasq/files/dnsmasq.conf b/recipes-support/dnsmasq/files/dnsmasq.conf
new file mode 100755
index 0000000..34d5135
--- /dev/null
+++ b/recipes-support/dnsmasq/files/dnsmasq.conf
@@ -0,0 +1,293 @@
+# Configuration file for dnsmasq.
+#
+# Format is one option per line, legal options are the same
+# as the long options legal on the command line. See
+# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
+
+# Change these lines if you want dnsmasq to serve MX records.
+# Only one of mx-host and mx-target need be set, the other defaults
+# to the name of the host running dnsmasq.
+#mx-host=
+#mx-target=
+#selfmx
+#localmx
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# uneccessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link uneccessarily.
+
+# Never forward plain names (with a dot or domain part)
+domain-needed
+# Never forward addresses in the non-routed address spaces.
+bogus-priv
+
+
+# Uncomment this to filter useless windows-originated DNS requests
+# which can trigger dial-on-demand links needlessly.
+# Note that (amongst other things) this blocks all SRV requests,
+# so don't use it if you use eg Kerberos.
+#filterwin2k
+
+# Change this line if you want dns to get its upstream servers from
+# somewhere other that /etc/resolv.conf
+#resolv-file=
+
+# By default, dnsmasq will send queries to any of the upstream
+# servers it knows about and tries to favour servers to are known
+# to be up. Uncommenting this forces dnsmasq to try each query
+# with each server strictly in the order they appear in
+# /etc/resolv.conf
+#strict-order
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers for this file instead (see below), then
+# uncomment this
+#no-resolv
+
+# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
+# files for changes and re-read them then uncomment this.
+#no-poll
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
+#server=/localnet/192.168.0.1
+
+# Add local-only domains here, queries in these domains are answered
+# from /etc/hosts or DHCP only.
+#local=/localnet/
+
+# Add domains which you want to force to an IP address here.
+# The example below send any host in doubleclick.net to a local
+# webserver.
+#address=/doubleclick.net/127.0.0.1
+
+# You no longer (as of version 1.7) need to set these to enable
+# dnsmasq to read /etc/ppp/resolv.conf since dnsmasq now uses the
+# "dip" group to achieve this.
+#user=
+#group=
+
+# If you want dnsmasq to listen for requests only on specified interfaces
+# (and the loopback) give the name of the interface (eg eth0) here.
+# Repeat the line for more than one interface.
+#interface=
+# Or you can specify which interface _not_ to listen on
+#except-interface=
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
+#listen-address=127.0.0.1
+
+# On systems which support it, dnsmasq binds the wildcard address,
+# even when it is listening on only some interfaces. It then discards
+# requests that it shouldn't reply to. This has the advantage of
+# working even when interfaces come and go and change address. If you
+# want dnsmasq to really bind only the interfaces it is listening on,
+# uncomment this option. About the only time you may need this is when
+# running another nameserver on the same machine.
+#bind-interfaces
+
+# If you don't want dnsmasq to read /etc/hosts, uncomment the
+# following line.
+#no-hosts
+# or if you want it to read another file, as well as /etc/hosts, use
+# this.
+#addn-hosts=/etc/banner_add_hosts
+
+# Set this (and domain: see below) if you want to have a domain
+# automatically added to simple names in a hosts-file.
+#expand-hosts
+
+# Set the domain for dnsmasq. this is optional, but if it is set, it
+# does the following things.
+# 1) Allows DHCP hosts to have fully qualified domain names, as long
+# as the domain part matches this setting.
+# 2) Sets the "domain" DHCP option thereby potentially setting the
+# domain of all systems configured by DHCP
+# 3) Provides the domain part for "expand-hosts"
+#domain=thekelleys.org.uk
+
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+#dhcp-range=192.168.0.50,192.168.0.150,12h
+#dhcp-range=10.0.0.10,10.0.0.200,2h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
+
+# This is an example of a DHCP range with a network-id, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=red,192.168.0.50,192.168.0.150
+
+# Supply parameters for specified hosts using DHCP. There are lots
+# of valid alternatives, so we will give examples of each. Note that
+# IP addresses DO NOT have to be in the range given above, they just
+# need to be on the same network. The order of the parameters in these
+# do not matter, it's permissble to give name,adddress and MAC in any order
+
+# Always allocate the host with ethernet address 11:22:33:44:55:66
+# The IP address 192.168.0.60
+#dhcp-host=11:22:33:44:55:66,192.168.0.60
+
+# Always set the name of the host with hardware address
+# 11:22:33:44:55:66 to be "fred"
+#dhcp-host=11:22:33:44:55:66,fred
+
+# Always give the host with ethernet address 11:22:33:44:55:66
+# the name fred and IP address 192.168.0.60 and lease time 45 minutes
+#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
+
+# Give the machine which says it's name is "bert" IP address
+# 192.168.0.70 and an infinite lease
+#dhcp-host=bert,192.168.0.70,infinite
+
+# Always give the host with client identifier 01:02:02:04
+# the IP address 192.168.0.60
+#dhcp-host=id:01:02:02:04,192.168.0.60
+
+# Always give the host with client identifier "marjorie"
+# the IP address 192.168.0.60
+#dhcp-host=id:marjorie,192.168.0.60
+
+# Enable the address given for "judge" in /etc/hosts
+# to be given to a machine presenting the name "judge" when
+# it asks for a DHCP lease.
+#dhcp-host=judge
+
+# Never offer DHCP service to a machine whose ethernet
+# address is 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,ignore
+
+# Ignore any client-id presented by the machine with ethernet
+# address 11:22:33:44:55:66. This is useful to prevent a machine
+# being treated differently when running under different OS's or
+# between PXE boot and OS boot.
+#dhcp-host=11:22:33:44:55:66,id:*
+
+# Send extra options which are tagged as "red" to
+# the machine with ethernet address 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,net:red
+
+# Send extra options which are tagged as "red" to any machine whose
+# DHCP vendorclass string includes the substring "Linux"
+#dhcp-vendorclass=red,Linux
+
+# Send extra options which are tagged as "red" to any machine one
+# of whose DHCP userclass strings includes the substring "accounts"
+#dhcp-userclass=red,accounts
+
+# If this line is uncommented, dnsmasq will read /etc/ethers and act
+# on the ethernet-address/IP pairs found there just as if they had
+# been given as --dhcp-host options. Useful if you keep
+# MAC-address/host mappings there for other purposes.
+#read-ethers
+
+# Send options to hosts which ask for a DHCP lease.
+# See RFC 2132 for details of available options.
+# Note that all the common settings, such as netmask and
+# broadcast address, DNS server and default route, are given
+# sane defaults by dnsmasq. You very likely will not need any
+# any dhcp-options. If you use Windows clients and Samba, there
+# are some options which are recommended, they are detailed at the
+# end of this section.
+# For reference, the common options are:
+# subnet mask - 1
+# default router - 3
+# DNS server - 6
+# broadcast address - 28
+
+# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
+#dhcp-option=42,192.168.0.4,10.10.0.5
+
+# Set the NTP time server address to be the same machine as
+# is running dnsmasq
+#dhcp-option=42,0.0.0.0
+
+# Set the NIS domain name to "welly"
+#dhcp-option=40,welly
+
+# Set the default time-to-live to 50
+#dhcp-option=23,50
+
+# Set the "all subnets are local" flag
+#dhcp-option=27,1
+
+# Send the etherboot magic flag and then etherboot options (a string).
+#dhcp-option=128,e4:45:74:68:00:00
+#dhcp-option=129,NIC=eepro100
+
+# Specify an option which will only be sent to the "red" network
+# (see dhcp-range for the declaration of the "red" network)
+#dhcp-option=red,42,192.168.1.1
+
+# The following DHCP options set up dnsmasq in the same way as is specified
+# for the ISC dhcpcd in
+# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
+# adapted for a typical dnsmasq installation where the host running
+# dnsmasq is also the host running samba.
+# you may want to uncomment them if you use Windows clients and Samba.
+#dhcp-option=19,0 # option ip-forwarding off
+#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
+#dhcp-option=45,0.0.0.0 # netbios datagram distribution server
+#dhcp-option=46,8 # netbios node type
+#dhcp-option=47 # empty netbios scope.
+
+
+# Set the boot filename and tftpd server name and address
+# for BOOTP. You will only need this is you want to
+# boot machines over the network.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
+
+# Set the limit on DHCP leases, the default is 150
+#dhcp-lease-max=150
+
+# The DHCP server needs somewhere on disk to keep its lease database.
+# This defaults to a sane location, but if you want to change it, use
+# the line below.
+#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
+
+# Set the cachesize here.
+#cache-size=150
+
+# If you want to disable negative caching, uncomment this.
+#no-negcache
+
+# Normally responses which come form /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
+#local-ttl=
+
+# If you want dnsmasq to detect attempts by Verisign to send queries
+# to unregistered .com and .net hosts to its sitefinder service and
+# have dnsmasq instead return the correct NXDOMAIN response, uncomment
+# this line. You can add similar lines to do the same for other
+# registries which have implemented wildcard A records.
+#bogus-nxdomain=64.94.110.11
+
+# If you want to fix up DNS results from upstream servers, use the
+# alias option. This only works for IPv4.
+# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
+#alias=1.2.3.4,5.6.7.8
+# and this maps 1.2.3.x to 5.6.7.x
+#alias=1.2.3.0,5.6.7.0,255.255.255.0
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
+#log-queries
+
+# Include a another lot of configuration options.
+#conf-file=/etc/dnsmasq.more.conf
+
+
+
+
+
diff --git a/recipes-support/dnsmasq/files/dnsmasq.resolvconf b/recipes-support/dnsmasq/files/dnsmasq.resolvconf
new file mode 100755
index 0000000..06cd25c
--- /dev/null
+++ b/recipes-support/dnsmasq/files/dnsmasq.resolvconf
@@ -0,0 +1,84 @@
+#!/bin/sh
+#
+# Script to update the resolver list for dnsmasq
+#
+# N.B. Resolvconf may run us even if dnsmasq is not (yet) running.
+# If dnsmasq is installed then we go ahead and update the resolver list
+# in case dnsmasq is started later.
+#
+# Assumption: On entry, PWD contains the resolv.conf-type files.
+#
+# This file is part of the dnsmasq package.
+#
+
+set -e
+
+RUN_DIR="/run/dnsmasq"
+RSLVRLIST_FILE="${RUN_DIR}/resolv.conf"
+TMP_FILE="${RSLVRLIST_FILE}_new.$$"
+MY_NAME_FOR_RESOLVCONF="dnsmasq"
+
+[ -x /usr/bin/dnsmasq ] || exit 0
+[ -x /lib/resolvconf/list-records ] || exit 1
+
+PATH=/bin:/sbin
+
+report_err() { echo "$0: Error: $*" >&2 ; }
+
+# Stores arguments (minus duplicates) in RSLT, separated by spaces
+# Doesn't work properly if an argument itself contains whitespace
+uniquify()
+{
+ RSLT=""
+ while [ "$1" ] ; do
+ for E in $RSLT ; do
+ [ "$1" = "$E" ] && { shift ; continue 2 ; }
+ done
+ RSLT="${RSLT:+$RSLT }$1"
+ shift
+ done
+}
+
+if [ ! -d "$RUN_DIR" ] && ! mkdir --parents --mode=0755 "$RUN_DIR" ; then
+ report_err "Failed trying to create directory $RUN_DIR"
+ exit 1
+fi
+
+RSLVCNFFILES=""
+for F in $(/lib/resolvconf/list-records --after "lo.$MY_NAME_FOR_RESOLVCONF") ; do
+ case "$F" in
+ "lo.$MY_NAME_FOR_RESOLVCONF")
+ # Omit own record
+ ;;
+ lo.*)
+ # Include no more records after one for a local nameserver
+ RSLVCNFFILES="${RSLVCNFFILES:+$RSLVCNFFILES }$F"
+ break
+ ;;
+ *)
+ RSLVCNFFILES="${RSLVCNFFILES:+$RSLVCNFFILES }$F"
+ ;;
+ esac
+done
+
+NMSRVRS=""
+if [ "$RSLVCNFFILES" ] ; then
+ uniquify $(sed -n -e 's/^[[:space:]]*nameserver[[:space:]]\+//p' $RSLVCNFFILES)
+ NMSRVRS="$RSLT"
+fi
+
+# Dnsmasq uses the mtime of $RSLVRLIST_FILE, with a resolution of one second,
+# to detect changes in the file. This means that if a resolvconf update occurs
+# within one second of the previous one then dnsmasq may fail to notice the
+# more recent change. To work around this problem we sleep one second here
+# if necessary in order to ensure that the new mtime is different.
+if [ -f "$RSLVRLIST_FILE" ] && [ "$(stat -c %X "$RSLVRLIST_FILE")" = "$(date +%s)" ] ; then
+ sleep 1
+fi
+
+clean_up() { rm -f "$TMP_FILE" ; }
+trap clean_up EXIT
+: >| "$TMP_FILE"
+for N in $NMSRVRS ; do echo "nameserver $N" >> "$TMP_FILE" ; done
+mv -f "$TMP_FILE" "$RSLVRLIST_FILE"
+
diff --git a/recipes-support/dnsmasq/files/init b/recipes-support/dnsmasq/files/init
new file mode 100644
index 0000000..51c95df
--- /dev/null
+++ b/recipes-support/dnsmasq/files/init
@@ -0,0 +1,117 @@
+#!/bin/sh
+DAEMON=/usr/bin/dnsmasq
+NAME=dnsmasq
+DESC="DNS forwarder and DHCP server"
+ARGS="-7 /etc/dnsmasq.d"
+
+test -f $DAEMON || exit 0
+
+set -e
+
+if [ -r /etc/default/$NAME ]
+then
+ . /etc/default/$NAME
+fi
+
+DNSMASQ_CONF="/etc/dnsmasq.conf"
+test "/etc/dnsmasq.d/*" != '/etc/dnsmasq.d/*' && DNSMASQ_CONF="${DNSMASQ_CONF} /etc/dnsmasq.d/*"
+
+test -z "${PIDFILE}" && PIFILE="/run/dnsmasq.pid"
+
+if [ -z "$IGNORE_RESOLVCONF" ]
+then
+ egrep -h -q '^no-resolv' ${DNSMASQ_CONF} && IGNORE_RESOLVCONF="yes"
+fi
+
+# RESOLV_CONF:
+# If the resolvconf package is installed then use the resolv conf file
+# that it provides as the default. Otherwise use /etc/resolv.conf as
+# the default.
+#
+# If IGNORE_RESOLVCONF is set in /etc/default/dnsmasq or an explicit
+# filename is set there then this inhibits the use of the resolvconf-provided
+# information.
+#
+# Note that if the resolvconf package is installed it is not possible to
+# override it just by configuration in /etc/dnsmasq.conf, it is necessary
+# to set IGNORE_RESOLVCONF=yes in /etc/default/dnsmasq.
+
+test -z "$RESOLV_CONF" -a "$IGNORE_RESOLVCONF" != "yes" -a -x /sbin/resolvconf && \
+ RESOLV_CONF=/run/dnsmasq/resolv.conf
+
+start_resolvconf()
+{
+ if [ "$IGNORE_RESOLVCONF" != "yes" -a -x /sbin/resolvconf ]
+ then
+ echo "nameserver 127.0.0.1" | /sbin/resolvconf -a lo.$NAME
+ fi
+ :
+}
+
+stop_resolvconf()
+{
+ if [ "$IGNORE_RESOLVCONF" != "yes" -a -x /sbin/resolvconf ]
+ then
+ /sbin/resolvconf -d lo.$NAME
+ fi
+ :
+}
+
+case "$1" in
+ start)
+ echo -n "starting $DESC: $NAME... "
+ test -d /var/lib/misc/ || mkdir /var/lib/misc/
+ start-stop-daemon -S -x $DAEMON -- $ARGS \
+ ${RESOLV_CONF:+ -r $RESOLV_CONF} \
+ ${PIDFILE:+ -x $PIDFILE}
+ test $? -eq 0 && start_resolvconf
+ echo "done."
+ ;;
+ stop)
+ echo -n "stopping $DESC: $NAME... "
+ stop_resolvconf
+ start-stop-daemon -K -x $DAEMON
+ echo "done."
+ ;;
+ status)
+ echo -n "dnsmasq "
+ start-stop-daemon -q -K -t -x $DAEMON
+ RET=$?
+ if [ "$RET" = "0" ]; then
+ PID=`cat ${PIDFILE}`
+ echo "($PID) is running"
+ else
+ echo "is not running"
+ exit $RET
+ fi
+ ;;
+ restart)
+ echo "restarting $DESC: $NAME... "
+ $0 stop
+ $0 start
+ echo "done."
+ ;;
+ reload)
+ echo -n "reloading $DESC: $NAME... "
+ killall -HUP $(basename ${DAEMON})
+ echo "done."
+ ;;
+ systemd-start-resolvconf)
+ start_resolvconf
+ ;;
+ systemd-stop-resolvconf)
+ stop_resolvconf
+ ;;
+ systemd-exec)
+ test -d /var/lib/misc/ || mkdir /var/lib/misc/
+ exec $DAEMON --keep-in-foreground $ARGS \
+ ${RESOLV_CONF:+ -r $RESOLV_CONF} \
+ ${PIDFILE:+ -x $PIDFILE}
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|status|restart|reload}"
+ exit 1
+ ;;
+esac
+
+exit 0