diff options
Diffstat (limited to 'recipes-connectivity/hostapd/files')
| -rw-r--r-- | recipes-connectivity/hostapd/files/default | 8 | ||||
| -rw-r--r-- | recipes-connectivity/hostapd/files/defconfig | 148 | ||||
| -rw-r--r-- | recipes-connectivity/hostapd/files/init | 69 |
3 files changed, 225 insertions, 0 deletions
diff --git a/recipes-connectivity/hostapd/files/default b/recipes-connectivity/hostapd/files/default new file mode 100644 index 0000000..8f3287d --- /dev/null +++ b/recipes-connectivity/hostapd/files/default @@ -0,0 +1,8 @@ +# set to "yes" to start hostapd on boot +START_ON_BOOT="no" +# Stuff to creat the device if needed. +DEV=wifi1 +if [[ -x /opt/rs9113/onebox_util ]] ; then + PREUP="[[ -d /sys/class/net/${DEV} ]] || (ifdown ${DEV};/opt/rs9113/onebox_util rpine0 create_vap ${DEV} ap;rfkill unblock all)" + POSTUP="ifup ${DEV}" +fi diff --git a/recipes-connectivity/hostapd/files/defconfig b/recipes-connectivity/hostapd/files/defconfig new file mode 100644 index 0000000..3a447c6 --- /dev/null +++ b/recipes-connectivity/hostapd/files/defconfig @@ -0,0 +1,148 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for Prism54 driver +CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +CONFIG_LIBNL32=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# IEEE 802.11ac (Very High Throughput) support +CONFIG_IEEE80211AC=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y diff --git a/recipes-connectivity/hostapd/files/init b/recipes-connectivity/hostapd/files/init new file mode 100644 index 0000000..04fd2d0 --- /dev/null +++ b/recipes-connectivity/hostapd/files/init @@ -0,0 +1,69 @@ +#!/bin/sh +DAEMON=/usr/sbin/hostapd +NAME=hostapd +DESC="HOSTAP Daemon" +ARGS="/etc/hostapd.conf -B" + +test -f $DAEMON || exit 0 + +[ -f /etc/default/$NAME ] && . /etc/default/$NAME + +set -e + +# source function library +. /etc/init.d/functions + +delay_stop() { + count=0 + while [ $count -lt 9 ] ; do + if pidof $DAEMON >/dev/null; then + sleep 1 + else + return 0 + fi + count=`expr $count + 1` + done + echo "Failed to stop $DESC." + return 1 +} + +case "$1" in + start) + if [ "$START_ON_BOOT" != "yes" ]; then + exit 0 + fi + if [[ -n $PREUP ]] ; then + bash -c "$PREUP" + fi + echo -n "Starting $DESC: " + start-stop-daemon -S -x $DAEMON -- $ARGS + if [[ -n $POSTUP ]] ; then + bash -c "$POSTUP" + fi + echo "$NAME." + ;; + stop) + echo -n "Stopping $DESC: " + start-stop-daemon -K --oknodo -x $DAEMON + echo "$NAME." + ;; + restart) + $0 stop + delay_stop && $0 start + ;; + reload) + echo -n "Reloading $DESC: " + killall -HUP $(basename ${DAEMON}) + echo "$NAME." + ;; + status) + status $DAEMON + exit $? + ;; + *) + echo "Usage: $0 {start|stop|restart|reload|status}" + exit 1 + ;; +esac + +exit 0 |