diff options
7 files changed, 170 insertions, 69 deletions
diff --git a/recipes-connectivity/lora/lora-packet-forwarder/global_conf.json.3.1.0.MTCAP-LORA-1-5.US915.basic b/recipes-connectivity/lora/lora-packet-forwarder/global_conf.json.3.1.0.MTCAP-LORA-1-5.US915.basic index c357414..97e2730 100644 --- a/recipes-connectivity/lora/lora-packet-forwarder/global_conf.json.3.1.0.MTCAP-LORA-1-5.US915.basic +++ b/recipes-connectivity/lora/lora-packet-forwarder/global_conf.json.3.1.0.MTCAP-LORA-1-5.US915.basic @@ -99,41 +99,41 @@ "tx_lut_0" : { "dig_gain" : 0, - "mix_gain" : 11, + "mix_gain" : 8, "pa_gain" : 0, "rf_power" : -6 }, "tx_lut_1" : { "dig_gain" : 0, - "mix_gain" : 13, + "mix_gain" : 10, "pa_gain" : 0, "rf_power" : -3 }, "tx_lut_10" : { - "dig_gain" : 0, - "mix_gain" : 15, + "dig_gain" : 1, + "mix_gain" : 12, "pa_gain" : 2, "rf_power" : 16 }, "tx_lut_11" : { - "dig_gain" : 0, - "mix_gain" : 10, + "dig_gain" : 1, + "mix_gain" : 8, "pa_gain" : 3, "rf_power" : 20 }, "tx_lut_12" : { - "dig_gain" : 0, - "mix_gain" : 12, + "dig_gain" : 1, + "mix_gain" : 10, "pa_gain" : 3, "rf_power" : 23 }, "tx_lut_13" : { - "dig_gain" : 0, + "dig_gain" : 2, "mix_gain" : 13, "pa_gain" : 3, "rf_power" : 25 @@ -141,7 +141,7 @@ "tx_lut_14" : { "dig_gain" : 0, - "mix_gain" : 15, + "mix_gain" : 13, "pa_gain" : 3, "rf_power" : 26 }, @@ -151,63 +151,63 @@ "mix_gain" : 15, "pa_gain" : 3, "rf_power" : 27 - }, + }, "tx_lut_2" : { "dig_gain" : 0, - "mix_gain" : 9, - "pa_gain" : 1, + "mix_gain" : 15, + "pa_gain" : 0, "rf_power" : 0 }, "tx_lut_3" : { - "dig_gain" : 0, - "mix_gain" : 10, + "dig_gain" : 3, + "mix_gain" : 11, "pa_gain" : 1, "rf_power" : 3 }, "tx_lut_4" : { - "dig_gain" : 0, - "mix_gain" : 12, + "dig_gain" : 2, + "mix_gain" : 11, "pa_gain" : 1, "rf_power" : 6 }, "tx_lut_5" : { - "dig_gain" : 0, - "mix_gain" : 10, - "pa_gain" : 2, + "dig_gain" : 2, + "mix_gain" : 15, + "pa_gain" : 1, "rf_power" : 10 }, "tx_lut_6" : { - "dig_gain" : 0, + "dig_gain" : 3, "mix_gain" : 11, "pa_gain" : 2, "rf_power" : 11 }, "tx_lut_7" : { - "dig_gain" : 0, - "mix_gain" : 11, + "dig_gain" : 1, + "mix_gain" : 9, "pa_gain" : 2, "rf_power" : 12 }, "tx_lut_8" : { "dig_gain" : 0, - "mix_gain" : 12, + "mix_gain" : 9, "pa_gain" : 2, "rf_power" : 13 }, "tx_lut_9" : { - "dig_gain" : 0, - "mix_gain" : 13, - "pa_gain" : 2, + "dig_gain" : 3, + "mix_gain" : 8, + "pa_gain" : 3, "rf_power" : 14 - } + } }, "gateway_conf": { "gateway_ID": "<WILL-BE-AUTO-REPLACED-WITH-LORA-EUI>", diff --git a/recipes-core/mlinux-scripts/mlinux-scripts-1.1/mlinux-cell-radio-ready b/recipes-core/mlinux-scripts/mlinux-scripts-1.1/mlinux-cell-radio-ready new file mode 100644 index 0000000..9930425 --- /dev/null +++ b/recipes-core/mlinux-scripts/mlinux-scripts-1.1/mlinux-cell-radio-ready @@ -0,0 +1,29 @@ +#!/bin/sh + +COUNTER=0 +TIMEOUT=60 + +if [ $# -gt 1 ]; then + echo "usage: $0 [timeout]" + exit 1 +fi + +[ $# -eq 1 ] && TIMEOUT=$1 + +# Wait for the radio to be ready before continuing +while [ $COUNTER -lt $TIMEOUT ]; do + TYPE=$(radio-query --type) + MODEL=$(radio-query --model) + if [ $? == 0 ]; then + echo "Cellular radio is ready." + exit 0 + fi + let COUNTER=COUNTER+1 + + echo "Waiting for radio to come up in order to identify type ..." + + sleep 1 +done + +echo "Cellular radio is not ready." +exit 1 diff --git a/recipes-core/multitech/config/ppp/peers/README.lna3 b/recipes-core/multitech/config/ppp/peers/README.lna3 new file mode 100644 index 0000000..19ba5a1 --- /dev/null +++ b/recipes-core/multitech/config/ppp/peers/README.lna3 @@ -0,0 +1,25 @@ +LNA3 firmware/SIM switching instructions + +Put the desired SIM into the device. + +Set the APN using: + + # mlinux-set-apn "YOURAPN" + +Do not put a "AT+CGDCONT" in the lna3_chat_vz script. It will cause trouble. + +To switch to the Verizon firmware and chat script: + + # mlinux-switch-cell-fw 1 + +To switch to the non-Verizon firmware and chat script: + + # mlinux-switch-cell-fw 0 + +Verizon provided APN setting over the air. If you set the APN on a Verizon SIM, +and they push a new APN, you will need to change the APN on the device. + +It is best not to set the APN. To switch from a manually set APN or incorrect APN +to letting Verizon set the APN, remove the SIM, and put it in another device. +Then register with the Verizon network. With the APN setting removed, put the SIM +back into this device. diff --git a/recipes-core/multitech/config/ppp/peers/leu1_chat b/recipes-core/multitech/config/ppp/peers/leu1_chat index 6f84008..23faf0e 100644 --- a/recipes-core/multitech/config/ppp/peers/leu1_chat +++ b/recipes-core/multitech/config/ppp/peers/leu1_chat @@ -13,7 +13,7 @@ OK 'AT+CSQ' # ---------------------------------- # Set the APN for your provider here # ---------------------------------- -OK 'AT+CGDCONT=1,"IPV4V6","internet"' +OK 'AT+CGDCONT=1,"IP","internet"' SAY "Dialing...\n" OK 'ATD*99***1#' SAY "Waiting for CONNECT...\n" diff --git a/recipes-core/multitech/config/ppp/peers/lna3_chat b/recipes-core/multitech/config/ppp/peers/lna3_chat index 700c682..ce7fe34 100644..120000 --- a/recipes-core/multitech/config/ppp/peers/lna3_chat +++ b/recipes-core/multitech/config/ppp/peers/lna3_chat @@ -1,40 +1 @@ -SAY "LNA3 chat\n" -ECHO OFF -ABORT 'NO DIAL TONE' -ABORT 'NO DIALTONE' -ABORT 'NO ANSWER' -ABORT 'NO CARRIER' -ABORT 'DELAYED' -ABORT 'VOICE' -ABORT 'BUSY' -'' 'AT' -OK 'ATZ' -OK 'AT+CSQ' -# ----------------------------------------- -# APN for your provider here -# This should be handled automatically -# by the script mlinux-set-apn. -# The IP field may be changed manually. -# There must not be an APN for -# Verizon wireless, since verizon -# pushes the APN from the network. -# The default is Verizon, since -# the AT+CGDCONT command will cause -# a fault for a Verizon SIM and will push -# the new APN to the network, which will -# cause failures. -# Correct procedure is to use -# mlinux-set-apn "APN" -# to set the APN when not on Verizon. -# And to switch the firmware to Verizon: -# mlinux-switch-cell-fw 1 -# And to switch to AT&T: -# mlinux-switch-cell-fw 0 -# ----------------------------------------- -#comment by mlinux-set-apn OK 'AT+CGDCONT=3,"IP","internet"' -SAY "Dialing...\n" -OK 'ATD*99***3#' -SAY "Waiting for CONNECT...\n" -TIMEOUT 120 -CONNECT '' -SAY "Connected\n" +README.lna3
\ No newline at end of file diff --git a/recipes-core/multitech/config/ppp/peers/lna3_chat_non_vz b/recipes-core/multitech/config/ppp/peers/lna3_chat_non_vz new file mode 100644 index 0000000..d29039a --- /dev/null +++ b/recipes-core/multitech/config/ppp/peers/lna3_chat_non_vz @@ -0,0 +1,46 @@ +#---------------------------------------- +# Do NOT use this CHAT script with +# Verizon wireless. It will bind +# this SIM and device to the wrong +# APN. +# +# mlinux-set-apn can be used to set +# the APN. +# +# mlinux-switch-cell-fw can be used +# to switch the firmware settings +# and set the correct CHAT script. +# +# # mlinux-set-apn "APN" +# +# And to switch the firmware to Verizon: +# # mlinux-switch-cell-fw 1 +# +# And to switch to AT&T: +# # mlinux-switch-cell-fw 0 +#---------------------------------------- +SAY "LNA3 chat not for Verizon\n" +ECHO OFF +ABORT 'NO DIAL TONE' +ABORT 'NO DIALTONE' +ABORT 'NO ANSWER' +ABORT 'NO CARRIER' +ABORT 'DELAYED' +ABORT 'VOICE' +ABORT 'BUSY' +'' 'AT' +OK 'ATZ' +OK 'AT+CSQ' +#------------------------------------------- +# Set the non-Verizon APN on the next line +#------------------------------------------- +#OK 'AT+CGDCONT=3,"IP","proxy"' +#OK 'AT+CGDCONT=3,"IP","ISP.CINGULAR"' +#OK 'AT+CGDCONT=3,"IP","internet2.voicestream.com"' +OK 'AT+CGDCONT=3,"IP","internet"' +SAY "Dialing...\n" +OK 'ATD*99***3#' +SAY "Waiting for CONNECT...\n" +TIMEOUT 120 +CONNECT '' +SAY "Connected\n" diff --git a/recipes-core/multitech/config/ppp/peers/lna3_chat_vz b/recipes-core/multitech/config/ppp/peers/lna3_chat_vz new file mode 100644 index 0000000..58a5b30 --- /dev/null +++ b/recipes-core/multitech/config/ppp/peers/lna3_chat_vz @@ -0,0 +1,40 @@ +#---------------------------- +# This chat script has no +# APN because Verizon +# requires the chat script +# not set the APN. +# This is because Verizon +# pushes the APN from their +# network. Image 1 on an +# LNA3 product is used +# with a Verizon SIM. +#---------------------------- +SAY "LNA3 chat Verizon\n" +ECHO OFF +ABORT 'NO DIAL TONE' +ABORT 'NO DIALTONE' +ABORT 'NO ANSWER' +ABORT 'NO CARRIER' +ABORT 'DELAYED' +ABORT 'VOICE' +ABORT 'BUSY' +'' 'AT' +OK 'ATZ' +OK 'AT+CSQ' +# ----------------------------------------- +# Do not enter the AT+CGDCONT, because it +# will cause +# a fault for a Verizon SIM and will push +# the new APN to the network, which will +# cause failures. +# To switch the firmware to Verizon: +# mlinux-switch-cell-fw 1 +# And to switch to AT&T (non-Verizon): +# mlinux-switch-cell-fw 0 +# ----------------------------------------- +SAY "Dialing...\n" +OK 'ATD*99***3#' +SAY "Waiting for CONNECT...\n" +TIMEOUT 120 +CONNECT '' +SAY "Connected\n" |