summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJesse Gilles <jgilles@multitech.com>2015-04-27 16:01:22 -0500
committerJesse Gilles <jgilles@multitech.com>2015-04-27 16:01:22 -0500
commit2b06fd93e6c522d0a1896536a5f6b2c428007e6e (patch)
treef2ecbbe1eaf3bade3de41b44c727ed08d0f78cee
parent57c0b83d6fa797899b59d56b0650ee52e42f7f49 (diff)
downloadmeta-mlinux-2b06fd93e6c522d0a1896536a5f6b2c428007e6e.tar.gz
meta-mlinux-2b06fd93e6c522d0a1896536a5f6b2c428007e6e.tar.bz2
meta-mlinux-2b06fd93e6c522d0a1896536a5f6b2c428007e6e.zip
add monit 5.12.2 recipe
-rw-r--r--recipes-extended/monit/monit/monit.default2
-rwxr-xr-xrecipes-extended/monit/monit/monit.init37
-rw-r--r--recipes-extended/monit/monit/monitrc272
-rw-r--r--recipes-extended/monit/monit_5.12.2.bb38
4 files changed, 349 insertions, 0 deletions
diff --git a/recipes-extended/monit/monit/monit.default b/recipes-extended/monit/monit/monit.default
new file mode 100644
index 0000000..0f92640
--- /dev/null
+++ b/recipes-extended/monit/monit/monit.default
@@ -0,0 +1,2 @@
+# set to "yes" or "no" to control starting on boot
+ENABLED="no"
diff --git a/recipes-extended/monit/monit/monit.init b/recipes-extended/monit/monit/monit.init
new file mode 100755
index 0000000..0a3c2ea
--- /dev/null
+++ b/recipes-extended/monit/monit/monit.init
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+NAME=monit
+
+ENABLED=yes
+[ -f /etc/default/$NAME ] && . /etc/default/$NAME
+
+if [ "$ENABLED" != "yes" ]; then
+ echo "$NAME: disabled in /etc/default"
+ exit
+fi
+
+case $1 in
+ start)
+ echo "Starting monit"
+ monit
+ ;;
+
+ stop)
+ echo "Stopping monit"
+ monit quit
+ ;;
+
+ restart)
+ echo "Stopping monit"
+ monit quit
+ echo "Starting monit"
+ monit
+ ;;
+
+ *)
+ echo "Usage: $0 {start|stop|restart}"
+ exit 2
+ ;;
+esac
+
+
diff --git a/recipes-extended/monit/monit/monitrc b/recipes-extended/monit/monit/monitrc
new file mode 100644
index 0000000..d04b115
--- /dev/null
+++ b/recipes-extended/monit/monit/monitrc
@@ -0,0 +1,272 @@
+###############################################################################
+## Monit control file
+###############################################################################
+##
+## Comments begin with a '#' and extend through the end of the line. Keywords
+## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'.
+##
+## Below you will find examples of some frequently used statements. For
+## information about the control file and a complete list of statements and
+## options, please have a look in the Monit manual.
+##
+##
+###############################################################################
+## Global section
+###############################################################################
+##
+## Start Monit in the background (run as a daemon):
+#
+set daemon 30 # check services at 30 seconds intervals
+# with start delay 240 # optional: delay the first check by 4-minutes (by
+# # default Monit check immediately after Monit start)
+#
+#
+## Set syslog logging with the 'daemon' facility. If the FACILITY option is
+## omitted, Monit will use 'user' facility by default. If you want to log to
+## a standalone log file instead, specify the full path to the log file
+#
+set logfile syslog facility log_daemon
+#
+#
+## Set the location of the Monit lock file which stores the process id of the
+## running Monit instance. By default this file is stored in $HOME/.monit.pid
+#
+# set pidfile /var/run/monit.pid
+#
+## Set the location of the Monit id file which stores the unique id for the
+## Monit instance. The id is generated and stored on first Monit start. By
+## default the file is placed in $HOME/.monit.id.
+#
+# set idfile /var/.monit.id
+#
+## Set the location of the Monit state file which saves monitoring states
+## on each cycle. By default the file is placed in $HOME/.monit.state. If
+## the state file is stored on a persistent filesystem, Monit will recover
+## the monitoring state across reboots. If it is on temporary filesystem, the
+## state will be lost on reboot which may be convenient in some situations.
+#
+# set statefile /var/.monit.state
+#
+## Set the list of mail servers for alert delivery. Multiple servers may be
+## specified using a comma separator. If the first mail server fails, Monit
+# will use the second mail server in the list and so on. By default Monit uses
+# port 25 - it is possible to override this with the PORT option.
+#
+# set mailserver mail.bar.baz, # primary mailserver
+# backup.bar.baz port 10025, # backup mailserver on port 10025
+# localhost # fallback relay
+#
+#
+## By default Monit will drop alert events if no mail servers are available.
+## If you want to keep the alerts for later delivery retry, you can use the
+## EVENTQUEUE statement. The base directory where undelivered alerts will be
+## stored is specified by the BASEDIR option. You can limit the queue size
+## by using the SLOTS option (if omitted, the queue is limited by space
+## available in the back end filesystem).
+#
+# set eventqueue
+# basedir /var/monit # set the base directory where events will be stored
+# slots 100 # optionally limit the queue size
+#
+#
+## Send status and events to M/Monit (for more informations about M/Monit
+## see http://mmonit.com/). By default Monit registers credentials with
+## M/Monit so M/Monit can smoothly communicate back to Monit and you don't
+## have to register Monit credentials manually in M/Monit. It is possible to
+## disable credential registration using the commented out option below.
+## Though, if safety is a concern we recommend instead using https when
+## communicating with M/Monit and send credentials encrypted.
+#
+# set mmonit http://monit:monit@192.168.1.10:8080/collector
+# # and register without credentials # Don't register credentials
+#
+#
+## Monit by default uses the following format for alerts if the the mail-format
+## statement is missing::
+## --8<--
+## set mail-format {
+## from: monit@$HOST
+## subject: monit alert -- $EVENT $SERVICE
+## message: $EVENT Service $SERVICE
+## Date: $DATE
+## Action: $ACTION
+## Host: $HOST
+## Description: $DESCRIPTION
+##
+## Your faithful employee,
+## Monit
+## }
+## --8<--
+##
+## You can override this message format or parts of it, such as subject
+## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
+## are expanded at runtime. For example, to override the sender, use:
+#
+# set mail-format { from: monit@foo.bar }
+#
+#
+## You can set alert recipients whom will receive alerts if/when a
+## service defined in this file has errors. Alerts may be restricted on
+## events by using a filter as in the second example below.
+#
+# set alert sysadm@foo.bar # receive all alerts
+#
+## Do not alert when Monit starts, stops or performs a user initiated action.
+## This filter is recommended to avoid getting alerts for trivial cases.
+#
+# set alert your-name@your.domain not on { instance, action }
+#
+#
+## Monit has an embedded HTTP interface which can be used to view status of
+## services monitored and manage services from a web interface. The HTTP
+## interface is also required if you want to issue Monit commands from the
+## command line, such as 'monit status' or 'monit restart service' The reason
+## for this is that the Monit client uses the HTTP interface to send these
+## commands to a running Monit daemon. See the Monit Wiki if you want to
+## enable SSL for the HTTP interface.
+#
+set httpd port 2812 and
+ use address localhost # only accept connection from localhost
+ allow localhost # allow localhost to connect to the server and
+ allow admin:monit # require user 'admin' with password 'monit'
+
+###############################################################################
+## Services
+###############################################################################
+##
+## Check general system resources such as load average, cpu and memory
+## usage. Each test specifies a resource, conditions and the action to be
+## performed should a test fail.
+#
+# check system myhost.mydomain.tld
+# if loadavg (1min) > 4 then alert
+# if loadavg (5min) > 2 then alert
+# if memory usage > 75% then alert
+# if swap usage > 25% then alert
+# if cpu usage (user) > 70% then alert
+# if cpu usage (system) > 30% then alert
+# if cpu usage (wait) > 20% then alert
+#
+#
+## Check if a file exists, checksum, permissions, uid and gid. In addition
+## to alert recipients in the global section, customized alert can be sent to
+## additional recipients by specifying a local alert handler. The service may
+## be grouped using the GROUP option. More than one group can be specified by
+## repeating the 'group name' statement.
+#
+# check file apache_bin with path /usr/local/apache/bin/httpd
+# if failed checksum and
+# expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor
+# if failed permission 755 then unmonitor
+# if failed uid root then unmonitor
+# if failed gid root then unmonitor
+# alert security@foo.bar on {
+# checksum, permission, uid, gid, unmonitor
+# } with the mail-format { subject: Alarm! }
+# group server
+#
+#
+## Check that a process is running, in this case Apache, and that it respond
+## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory,
+## and number of children. If the process is not running, Monit will restart
+## it by default. In case the service is restarted very often and the
+## problem remains, it is possible to disable monitoring using the TIMEOUT
+## statement. This service depends on another service (apache_bin) which
+## is defined above.
+#
+# check process apache with pidfile /usr/local/apache/logs/httpd.pid
+# start program = "/etc/init.d/httpd start" with timeout 60 seconds
+# stop program = "/etc/init.d/httpd stop"
+# if cpu > 60% for 2 cycles then alert
+# if cpu > 80% for 5 cycles then restart
+# if totalmem > 200.0 MB for 5 cycles then restart
+# if children > 250 then restart
+# if loadavg(5min) greater than 10 for 8 cycles then stop
+# if failed host www.tildeslash.com port 80 protocol http
+# and request "/somefile.html"
+# then restart
+# if failed port 443 type tcpssl protocol http
+# with timeout 15 seconds
+# then restart
+# if 3 restarts within 5 cycles then timeout
+# depends on apache_bin
+# group server
+#
+#
+## Check filesystem permissions, uid, gid, space and inode usage. Other services,
+## such as databases, may depend on this resource and an automatically graceful
+## stop may be cascaded to them before the filesystem will become full and data
+## lost.
+#
+# check filesystem datafs with path /dev/sdb1
+# start program = "/bin/mount /data"
+# stop program = "/bin/umount /data"
+# if failed permission 660 then unmonitor
+# if failed uid root then unmonitor
+# if failed gid disk then unmonitor
+# if space usage > 80% for 5 times within 15 cycles then alert
+# if space usage > 99% then stop
+# if inode usage > 30000 then alert
+# if inode usage > 99% then stop
+# group server
+#
+#
+## Check a file's timestamp. In this example, we test if a file is older
+## than 15 minutes and assume something is wrong if its not updated. Also,
+## if the file size exceed a given limit, execute a script
+#
+# check file database with path /data/mydatabase.db
+# if failed permission 700 then alert
+# if failed uid data then alert
+# if failed gid data then alert
+# if timestamp > 15 minutes then alert
+# if size > 100 MB then exec "/my/cleanup/script" as uid dba and gid dba
+#
+#
+## Check directory permission, uid and gid. An event is triggered if the
+## directory does not belong to the user with uid 0 and gid 0. In addition,
+## the permissions have to match the octal description of 755 (see chmod(1)).
+#
+# check directory bin with path /bin
+# if failed permission 755 then unmonitor
+# if failed uid 0 then unmonitor
+# if failed gid 0 then unmonitor
+#
+#
+## Check a remote host availability by issuing a ping test and check the
+## content of a response from a web server. Up to three pings are sent and
+## connection to a port and an application level network check is performed.
+#
+# check host myserver with address 192.168.1.1
+# if failed ping then alert
+# if failed port 3306 protocol mysql with timeout 15 seconds then alert
+# if failed port 80 protocol http
+# and request /some/path with content = "a string"
+# then alert
+#
+#
+## Check a network link status (up/down), link capacity changes, saturation
+## and bandwidth usage.
+#
+# check network public with interface eth0
+# if failed link then alert
+# if changed link then alert
+# if saturation > 90% then alert
+# if download > 10 MB/s then alert
+# if total upload > 1 GB in last hour then alert
+#
+#
+## Check custom program status output.
+#
+# check program myscript with path /usr/local/bin/myscript.sh
+# if status != 0 then alert
+#
+#
+###############################################################################
+## Includes
+###############################################################################
+##
+## It is possible to include additional configuration parts from other files or
+## directories.
+#
+include /etc/monit.d/*
diff --git a/recipes-extended/monit/monit_5.12.2.bb b/recipes-extended/monit/monit_5.12.2.bb
new file mode 100644
index 0000000..2774e29
--- /dev/null
+++ b/recipes-extended/monit/monit_5.12.2.bb
@@ -0,0 +1,38 @@
+DESCRIPTION = "Monit"
+HOMEPAGE = "http://mmonit.com/"
+LICENSE = "AGPL-3.0"
+LIC_FILES_CHKSUM = "file://COPYING;md5=ea116a7defaf0e93b3bb73b2a34a3f51"
+
+PR = "r1"
+
+SRC_URI = "http://mmonit.com/monit/dist/monit-5.12.2.tar.gz \
+ file://monitrc \
+ file://monit.init \
+ file://monit.default \
+ "
+
+SRC_URI[md5sum] = "5f5cf4c18b42e8091b49b4e07cf972ce"
+SRC_URI[sha256sum] = "8ab0296d1aa2351b1573481592d7b5e06de1edd49dff1b5552839605a450914c"
+
+inherit autotools
+
+EXTRA_OECONF_armv5 += "libmonit_cv_setjmp_available=yes libmonit_cv_vsnprintf_c99_conformant=yes"
+
+inherit update-rc.d
+
+INITSCRIPT_NAME = "monit"
+INITSCRIPT_PARAMS = "defaults 99 10"
+
+do_install_append() {
+ install -d ${D}${sysconfdir}
+ install -d ${D}${sysconfdir}/monit.d
+ install -m 0600 ${WORKDIR}/monitrc ${D}${sysconfdir}/
+
+ install -d ${D}${sysconfdir}/init.d
+ install -m 0755 ${WORKDIR}/monit.init ${D}${sysconfdir}/init.d/monit
+
+ install -d ${D}${sysconfdir}/default
+ install -m 0644 ${WORKDIR}/monit.default ${D}${sysconfdir}/default/monit
+}
+
+CONFFILES_${PN} += "${sysconfdir}/monitrc ${sysconfdir}/default/monit"