diff options
Diffstat (limited to 'recipes-connectivity/lora/lora-gateway-usb')
3 files changed, 0 insertions, 123 deletions
diff --git a/recipes-connectivity/lora/lora-gateway-usb/library.cfg b/recipes-connectivity/lora/lora-gateway-usb/library.cfg deleted file mode 100644 index 3d5d95a..0000000 --- a/recipes-connectivity/lora/lora-gateway-usb/library.cfg +++ /dev/null @@ -1,70 +0,0 @@ -# That file will be included in the Makefile files that have hardware dependencies - -### SPI interface to the concentrator ### -# Accepted values: -# native Linux native SPI driver (/dev/spidev32766.0) -# ftdi FTDI SPI-over-USB bridge using libmpsse/libftdi/libusb - -CFG_SPI= ftdi -CFG_SPI_DEV = "/dev/spidev32766.2" - -### Concentrator chip ### -# Accepted values: -# sx1301 Semtech SX1301 production chip -# fpga1301 FPGA containing the SX1301 IP - -CFG_CHIP= sx1301 - -### Radio chip(s) ### -# Accepted values: -# sx1257 Dual SX1257 transceivers, covering 860-1000 MHz -# sx1255 Dual SX1255 transceivers, covering 400-510 MHz - -CFG_RADIO= sx1257 - -### RF band configuration ### -# Used to configured frequency restrictions (eg. if a SAW filter is installed) -# Accepted values: -# full Full range supported by the radio(s) -# eu868 ETSI 868 (866) MHz band -# us915 FCC 915 MHz band -# cn470 China 470 MHz band -# eu433 ETSI 433 MHz band -# cn780 China 780 MHz band - -CFG_BAND= full - -### Board misc parameters & calibration ### -# Used to configure misc board options. -# RX RSSI indication and TX power are highly dependant on radio, band, filter -# and RF front-ends, and must be calibrated for each new board design. -# Available calibration parameters: -# dev_nano_868 FPGA-based nano-concentrator, with 868 MHz SAW filter -# ref_1301_868 SX1301 reference board with SX1257 radios, 868 MHz filters -# ref_1301_433 SX1301 reference board with SX1255 radios, 433 MHz filters -# kerlink_868 Kerlink LoRa 868MHz gateway -# kerlink_433 Kerlink LoRa 433MHz gateway -# cisco_433 Cisco LoRa 433MHz gateway -# cisco_470 Cisco LoRa 470MHz gateway -# cisco_780 Cisco LoRa 780MHz gateway -# Keep empty for no calibration parameters (neutral values will be used). - -# MTAC-LORA 900MHz -CFG_BRD= mtaclora - -### Network Type ### -# Accepted values: -# private Default -# lora_mac Only compliant with devices running LoRa MAC - -CFG_NET= private - -### Debug options ### -# Set the DEBUG_* to 1 to activate debug mode in individual modules. -# Warning: that makes the module *very verbose*, do not use for production - -DEBUG_AUX= 0 -DEBUG_SPI= 0 -DEBUG_REG= 0 -DEBUG_HAL= 0 -DEBUG_GPS= 0 diff --git a/recipes-connectivity/lora/lora-gateway-usb/lora-gateway-debug.patch b/recipes-connectivity/lora/lora-gateway-usb/lora-gateway-debug.patch deleted file mode 100644 index dba4392..0000000 --- a/recipes-connectivity/lora/lora-gateway-usb/lora-gateway-debug.patch +++ /dev/null @@ -1,13 +0,0 @@ -Index: git/libloragw/src/loragw_hal.c -=================================================================== ---- git.orig/libloragw/src/loragw_hal.c 2014-12-16 16:07:20.812506157 -0600 -+++ git/libloragw/src/loragw_hal.c 2014-12-16 16:18:34.427454833 -0600 -@@ -1626,6 +1626,8 @@ - break; - } - } -+ -+ DEBUG_PRINTF("DEBUG: Tx pow_index %d, rf_power %d\n", pow_index, tx_pow_table[pow_index].rf_power); - - /* loading TX imbalance correction */ - target_mix_gain = tx_pow_table[pow_index].mix_gain; diff --git a/recipes-connectivity/lora/lora-gateway-usb/lora-gateway-sync-word.patch b/recipes-connectivity/lora/lora-gateway-usb/lora-gateway-sync-word.patch deleted file mode 100644 index e51e02a..0000000 --- a/recipes-connectivity/lora/lora-gateway-usb/lora-gateway-sync-word.patch +++ /dev/null @@ -1,40 +0,0 @@ -diff --git a/libloragw/inc/loragw_hal.h b/libloragw/inc/loragw_hal.h -index 1516b65..24c5969 100644 ---- a/libloragw/inc/loragw_hal.h -+++ b/libloragw/inc/loragw_hal.h -@@ -302,6 +312,11 @@ struct lgw_pkt_tx_s { - - /* -------------------------------------------------------------------------- */ - /* --- PUBLIC FUNCTIONS PROTOTYPES ------------------------------------------ */ -+/** -+ * @brief Configure the lora synch word -+ * @param word for synch -+ */ -+void lgw_conf_lora_synch_word(uint8_t word); - - /** - @brief Configure an RF chain (must configure before start) -diff --git a/libloragw/src/loragw_hal.c b/libloragw/src/loragw_hal.c -index 5dbdf45..d0fe288 100644 ---- a/libloragw/src/loragw_hal.c -+++ b/libloragw/src/loragw_hal.c -@@ -827,6 +851,19 @@ void lgw_constant_adjust(void) { - /* -------------------------------------------------------------------------- */ - /* --- PUBLIC FUNCTIONS DEFINITION ------------------------------------------ */ - -+void lgw_conf_lora_synch_word(uint8_t word) { -+ uint8_t peak1 = word >> 4; -+ uint8_t peak2 = word & 0x0F; -+ -+ lgw_reg_w(LGW_FRAME_SYNCH_PEAK1_POS, peak1); /* default 1 */ -+ lgw_reg_w(LGW_FRAME_SYNCH_PEAK2_POS, peak2); /* default 2 */ -+ lgw_reg_w(LGW_MBWSSF_FRAME_SYNCH_PEAK1_POS, peak1); /* default 1 */ -+ lgw_reg_w(LGW_MBWSSF_FRAME_SYNCH_PEAK2_POS, peak2); /* default 2 */ -+ lgw_reg_w(LGW_TX_FRAME_SYNCH_PEAK1_POS, peak1); /* default 1 */ -+ lgw_reg_w(LGW_TX_FRAME_SYNCH_PEAK2_POS, peak2); /* default 2 */ -+} -+ -+ - int lgw_rxrf_setconf(uint8_t rf_chain, struct lgw_conf_rxrf_s conf) { - - /* check if the concentrator is running */ |