Remove unnecessary recipes

8 files changed, 0 insertions, 446 deletions

diff --git a/recipes-connectivity/hostapd/files/cfg80211.conf b/recipes-connectivity/hostapd/files/cfg80211.conf
deleted file mode 100644
index 4b6d264..0000000
--- a/recipes-connectivity/hostapd/files/cfg80211.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-# IEEE 802.11 Regulatory Domain for cfg80211 driver
-# AU -- Australia
-# AT -- Austria
-# BE -- Belgium
-# US -- USA
-# 00 -- World
-options cfg80211 ieee80211_regdom=00
diff --git a/recipes-connectivity/hostapd/hostapd/default b/recipes-connectivity/hostapd/hostapd/default
deleted file mode 100644
index a274de1..0000000
--- a/recipes-connectivity/hostapd/hostapd/default
+++ /dev/null
@@ -1,6 +0,0 @@
-# set to "yes" to start hostapd on boot
-START_ON_BOOT="no"
-# Stuff to creat the device if needed.
-DEV=wifi1
-PREUP="[[ -d /sys/class/net/${DEV} ]] || (ifdown wifi1;/opt/rs9113/onebox_util rpine0 create_vap ${DEV} ap;rfkill unblock all)"
-POSTUP="ifup wifi1"
diff --git a/recipes-connectivity/hostapd/hostapd/defconfig b/recipes-connectivity/hostapd/hostapd/defconfig
deleted file mode 100644
index 3a447c6..0000000
--- a/recipes-connectivity/hostapd/hostapd/defconfig
+++ /dev/null
@@ -1,148 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-CONFIG_LIBNL32=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
diff --git a/recipes-connectivity/hostapd/hostapd/defconfig.orig b/recipes-connectivity/hostapd/hostapd/defconfig.orig
deleted file mode 100644
index a62bec4..0000000
--- a/recipes-connectivity/hostapd/hostapd/defconfig.orig
+++ /dev/null
@@ -1,148 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-CONFIG_LIBNL32=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
diff --git a/recipes-connectivity/hostapd/hostapd/hostapd.service b/recipes-connectivity/hostapd/hostapd/hostapd.service
deleted file mode 100644
index 151c050..0000000
--- a/recipes-connectivity/hostapd/hostapd/hostapd.service
+++ /dev/null
@@ -1,11 +0,0 @@
-[Unit]
-Description=Hostapd IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
-After=network.target
-
-[Service]
-Type=forking
-PIDFile=/run/hostapd.pid
-ExecStart=@SBINDIR@/hostapd @SYSCONFDIR@/hostapd.conf -P /run/hostapd.pid -B
-
-[Install]
-WantedBy=multi-user.target
diff --git a/recipes-connectivity/hostapd/hostapd/init b/recipes-connectivity/hostapd/hostapd/init
deleted file mode 100644
index 04fd2d0..0000000
--- a/recipes-connectivity/hostapd/hostapd/init
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/sh
-DAEMON=/usr/sbin/hostapd
-NAME=hostapd
-DESC="HOSTAP Daemon"
-ARGS="/etc/hostapd.conf -B"
-
-test -f $DAEMON || exit 0
-
-[ -f /etc/default/$NAME ] && . /etc/default/$NAME
-
-set -e
-
-# source function library
-. /etc/init.d/functions
-
-delay_stop() {
-	count=0
-	while [ $count -lt 9 ] ; do
-	        if pidof $DAEMON >/dev/null; then
-	                sleep 1
-	        else
-	                return 0
-	        fi
-		count=`expr $count + 1`
-	done
-	echo "Failed to stop $DESC."
-	return 1
-}
-
-case "$1" in
-    start)
-        if [ "$START_ON_BOOT" != "yes" ]; then
-	    exit 0
-        fi
-        if [[ -n $PREUP ]] ; then
-		bash -c "$PREUP"
-        fi
-	echo -n "Starting $DESC: "
-	start-stop-daemon -S -x $DAEMON -- $ARGS
-        if [[ -n $POSTUP ]] ; then
-                bash -c "$POSTUP"
-        fi
-	echo "$NAME."
-	;;
-    stop)
-	echo -n "Stopping $DESC: "
-	start-stop-daemon -K --oknodo -x $DAEMON
-	echo "$NAME."
-	;;
-    restart)
-	$0 stop
-	delay_stop && $0 start
-	;;
-    reload)
-	echo -n "Reloading $DESC: "
-	killall -HUP $(basename ${DAEMON})
-	echo "$NAME."
-	;;
-    status)
-	status $DAEMON
-	exit $?
-	;;
-    *)
-	echo "Usage: $0 {start|stop|restart|reload|status}"
-	exit 1
-	;;
-esac
-
-exit 0
diff --git a/recipes-connectivity/hostapd/hostapd_%.bbappend b/recipes-connectivity/hostapd/hostapd_%.bbappend
deleted file mode 100644
index d94e2ad..0000000
--- a/recipes-connectivity/hostapd/hostapd_%.bbappend
+++ /dev/null
@@ -1,6 +0,0 @@
-SRC_URI += "file://cfg80211.conf"
-
-do_install_append() {
-	install -d ${D}{sysconfdir}/modprobe.d
-	install -m 644 -D ${WORKDIR}/cfg80211.conf ${D}${sysconfdir}/modprobe.d/cfg80211.conf
-}
diff --git a/recipes-connectivity/hostapd/hostapd_2.8.bb b/recipes-connectivity/hostapd/hostapd_2.8.bb
deleted file mode 100644
index 15884d0..0000000
--- a/recipes-connectivity/hostapd/hostapd_2.8.bb
+++ /dev/null
@@ -1,51 +0,0 @@
-SUMMARY = "User space daemon for extended IEEE 802.11 management"
-HOMEPAGE = "http://w1.fi/hostapd/"
-SECTION = "kernel/userland"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://hostapd/README;md5=1ec986bec88070e2a59c68c95d763f89"
-
-DEPENDS = "libnl openssl"
-
-SRC_URI = " \
-    http://w1.fi/releases/hostapd-${PV}.tar.gz \
-    file://defconfig \
-    file://init \
-    file://hostapd.service \
-"
-
-SRC_URI[md5sum] = "ed2c254e5f400838cb9d8e7b6e43b86c"
-SRC_URI[sha256sum] = "929f522be6eeec38c53147e7bc084df028f65f148a3f7e4fa6c4c3f955cee4b0"
-
-S = "${WORKDIR}/hostapd-${PV}"
-B = "${WORKDIR}/hostapd-${PV}/hostapd"
-
-inherit update-rc.d systemd pkgconfig distro_features_check
-
-CONFLICT_DISTRO_FEATURES = "openssl-no-weak-ciphers"
-
-INITSCRIPT_NAME = "hostapd"
-
-SYSTEMD_SERVICE_${PN} = "hostapd.service"
-SYSTEMD_AUTO_ENABLE_${PN} = "disable"
-
-do_configure_append() {
-    install -m 0644 ${WORKDIR}/defconfig ${B}/.config
-}
-
-do_compile() {
-    export CFLAGS="-MMD -O2 -Wall -g"
-    export EXTRA_CFLAGS="${CFLAGS}"
-    make V=1
-}
-
-do_install() {
-    install -d ${D}${sbindir} ${D}${sysconfdir}/init.d ${D}${systemd_unitdir}/system/
-    install -m 0644 ${B}/hostapd.conf ${D}${sysconfdir}
-    install -m 0755 ${B}/hostapd ${D}${sbindir}
-    install -m 0755 ${B}/hostapd_cli ${D}${sbindir}
-    install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd
-    install -m 0644 ${WORKDIR}/hostapd.service ${D}${systemd_unitdir}/system/
-    sed -i -e 's,@SBINDIR@,${sbindir},g' -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/hostapd.service
-}
-
-CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"