From 42d384984b2f760bc8f7a69c7ea3464c73f4d892 Mon Sep 17 00:00:00 2001
From: Serhii Kostiuk <serhii.o.kostiuk@globallogic.com>
Date: Tue, 2 Jun 2020 17:19:03 +0300
Subject: [GP-651] LNA7: Allow to start the OMA DM procedure when it is
 required

This commits adds support for the Quectel-specific OMA DM commands.
This allows to trigger OMA DM procedure om Verizon to fetch the corrent APN
values and other settings from the network.

Expected radio output on success:

```
+QODM: "DME",0,DM Start
+QODM: "DME",0,DM End
```

Other +QODM URC codes are also possible according to information from Quectel forum:
https://forums.quectel.com/t/what-is-the-meaning-of-qodm-fumo-report-failed/2444/5.

But only "DM Start" and "DM End" responses are expected, supported and treated
as correct in the libmts-io.
---
 src/MTS_IO_CellularRadio.cpp |  6 ++++
 src/MTS_IO_QuectelRadio.cpp  | 72 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)

(limited to 'src')

diff --git a/src/MTS_IO_CellularRadio.cpp b/src/MTS_IO_CellularRadio.cpp
index 50fdf5c..648894f 100644
--- a/src/MTS_IO_CellularRadio.cpp
+++ b/src/MTS_IO_CellularRadio.cpp
@@ -1020,6 +1020,12 @@ ICellularRadio::CODE CellularRadio::activate(const Json::Value&, UpdateCb&) {
     return NOT_APPLICABLE;
 }
 
+ICellularRadio::CODE CellularRadio::startOmaDm(ICellularRadio::UpdateCb&) {
+    printTrace("%s| Start OMA DM procedure: not applicable", m_sName.c_str());
+
+    return NOT_APPLICABLE;
+}
+
 ICellularRadio::CODE CellularRadio::setActiveFirmware(const Json::Value&) {
     printTrace("%s| Set Active Firmware Image Number: not applicable", m_sName.c_str());
 
diff --git a/src/MTS_IO_QuectelRadio.cpp b/src/MTS_IO_QuectelRadio.cpp
index c4bdc56..b750bd6 100644
--- a/src/MTS_IO_QuectelRadio.cpp
+++ b/src/MTS_IO_QuectelRadio.cpp
@@ -436,6 +436,78 @@ ICellularRadio::CODE QuectelRadio::setMdn(const Json::Value& jArgs) {
     return NOT_APPLICABLE;
 }
 
+ICellularRadio::CODE QuectelRadio::startOmaDm(ICellularRadio::UpdateCb& stepCb) {
+    printTrace("%s| Start OMA DM procedure", getName().c_str());
+
+    const int32_t iTimeoutOk = 3 * 1000;  // 3 seconds
+    const int32_t iTimeoutStart = 5 * 1000;  // 5 seconds
+    const int32_t iTimeoutEnd = 1 * 60 * 1000;  // 1 minute
+
+    const std::string sOdmStarted = "DM Start";
+    const std::string sOdmFinished = "DM End";
+
+    const std::vector<std::string> vOdmStartedStrings{ sOdmStarted };
+    const std::vector<std::string> vOdmFinishedStrings{ sOdmFinished };
+
+    CODE eCode;
+
+    do {
+
+        // Send command and expect "OK" in iTimeoutOk milliseconds
+        eCode = sendBasicCommand("AT+QODM=\"DME\",2,\"UI\"", iTimeoutOk);
+        if (eCode != SUCCESS) {
+            printError("%s| OMA DM procedure can not be started", getName().c_str());
+            if (stepCb) {
+                stepCb(Json::Value("OMA DM Error: OMA DM can not be started"));
+            }
+            break;
+        }
+
+        // Wait for the "Start" response
+        std::string sResponse = sendCommand("", vOdmStartedStrings, iTimeoutStart, 0x00);
+        printDebug("%s| Radio returned: [%s]", getName().c_str(), sResponse.c_str());
+
+        if (sResponse.find(sOdmStarted) == std::string::npos) {
+            printError("%s| OMA DM procedure failed due to timeout", getName().c_str());
+            if (stepCb) {
+                stepCb(Json::Value("OMA DM Error: OMA DM failed due to timeout"));
+            }
+            eCode = FAILURE;
+            break;
+        }
+
+        // Got "DM Started" message from the radio
+        printTrace("%s| OMA DM started", getName().c_str());
+        if (stepCb) {
+            stepCb(Json::Value("OMA DM Info: OMA DM started"));
+        }
+
+        // Wait for the "End" response
+        sResponse = sendCommand("", vOdmFinishedStrings, iTimeoutEnd, 0x00);
+        printDebug("%s| Radio returned: [%s]", getName().c_str(), sResponse.c_str());
+
+        if (sResponse.find(sOdmFinished) == std::string::npos) {
+            printError("%s| OMA DM procedure failed due to timeout", getName().c_str());
+            if (stepCb) {
+                stepCb(Json::Value("OMA DM Error: OMA DM failed due to timeout"));
+            }
+            eCode = FAILURE;
+            break;
+        }
+
+        // Got "DM End" message from the radio
+        printTrace("%s| OMA DM finished", getName().c_str());
+        if (stepCb) {
+            stepCb(Json::Value("OMA DM Info: OMA DM finished"));
+        }
+
+        eCode = SUCCESS;
+
+    } while (false);
+
+    return eCode;
+}
+
 ICellularRadio::CODE QuectelRadio::getServiceDomain(ICellularRadio::SERVICEDOMAIN& sd) {
     printTrace("%s| Get Service Domain", getName().c_str());
 
-- 
cgit v1.2.3