| Age | Commit message (Collapse) | Author | Files |
|---|
|
Add additional command about all carrier profiles that are supported.
|
|
- the function getNetworkStatus(Json::Value& jData) changed to follow common logic (jDebug is empty when the main status command is failed)
- removed unnecessary prints from the secondary status commands
|
|
|
|
|
|
Implementing CB610L radio modem support
|
|
- function getRegistrationCommands() implemented as
pure virtual and overrided for every base radio model
- minor indentation fixes
- function getSimStatusSummary(Json::Value& jData) changed to process
radio modems that do not have separate commands for the SIM presence check
- function getManufacturer(std::string& sManufacturer) changed: AT command changet to 'AT+CGMI'
- src/MTS_IO_QuectelRadio.cpp -- comments correction
|
|
[GP-1733] mPower R.6.3.X: L6G1 Support
See merge request !53
|
|
|
|
Implementing CB610L radio modem support
|
|
- function getRegistrationCommands() implemented as
pure virtual and overrided for every base radio model
- minor indentation fixes
- function getSimStatusSummary(Json::Value& jData) changed to process
radio modems that do not have separate commands for the SIM presence check
- function getManufacturer(std::string& sManufacturer) changed: AT command changet to 'AT+CGMI'
- src/MTS_IO_QuectelRadio.cpp -- comments correction
|
|
|
|
MCC/MNC Table Update for Verizon and AT&T
See merge request !52
|
|
- 31030 - AT&T - from UBX-13001820 - R13;
- 310590 - Verizon - from UBX-13001820 - R13;
- 310650 - Cisco Jasper MVNO in AT&T network - from UBX-13001820 - R13;
- 310890 - Verizon - from UBX-13001820 - R13;
- 311270 - Verizon - from VZ_REQ_LTEB13NAC_12084129, IMS SIM;
- 311480 - Verizon - from VZ_REQ_LTEB13NAC_12084129, IMS SIM;
- 312770 - Verizon - from the output of AT#FWPLS? on a 5SG1 radio.
|
|
[GP-1195] Cellular debugging - add a query
See merge request !51
|
|
Define the set of debugging AT commands and a function to execute such
commands. The function executes the commands one-by-one end returns raw command
outputs. To be used by radio-query --diagnostics.
|
|
Executing AT#RFSTS while the SIM card is locked by PIN or PUK causes a deadlock
in the legacy LE910 (LAT1, LEU1, LVW2) firmware. Avoid executing AT#RFSTS if
the SIM card is locked by PUK.
|
|
[MTX-4694][GP-1791] MTCAP3 mPower R.6.1.X: LNA7D support - APN setup behavior wh…
See merge request !50
|
|
behavior when provider is Verizon
Implement getting the CGDCONT from the modem
Implement setting the CGDCONT to the modem
|
|
|
|
setRxDiversity command moved to common class for Quectel radios - QuectelRadio.cpp.
Add LNA7D radio support.
LNA7D radio supports only 3g and 4g network modes.
Add new command for enabling/disabling diversity. Retained backward compatibility with the old diversity command.
|
|
Fix LNA7D delta radio firmware upgrade issue (handling double radio reset).
|
|
[MTX-4503] mPower R.6.0.X: Remove Verizon FOTA feature from the code GP-1610
See merge request !49
|
|
|
|
[MTX-4445] mPower R.6.0.X: MTCAP3: LNA7D - cellular radio support GP-1548
See merge request !48
|
|
setRxDiversity command moved to common class for Quectel radios - QuectelRadio.cpp.
Add LNA7D radio support.
LNA7D radio supports only 3g and 4g network modes.
Add new command for enabling/disabling diversity. Retained backward compatibility with the old diversity command.
|
|
Fix LNA7D delta radio firmware upgrade issue (handling double radio reset).
|
|
|
|
network. GP-1364
Add 2 functions for Telit and Quectel modems:
- disableVoiceSupport: disable voice support (IMS and CSFB) and enable SMS only registration flag.
- getVoiceSupport: get voice support configuration for the current radio.
|
|
|
|
network. GP-1364
Add 2 functions for Telit and Quectel modems:
- disableVoiceSupport: disable voice support (IMS and CSFB) and enable SMS only registration flag.
- getVoiceSupport: get voice support configuration for the current radio.
|
|
[GP-1111] mPower R. Apr 2021: +CEMODE shall be set to CEMODE=2
See merge request !40
|
|
Switched to the separate fields for SIM MCC and SIM MNC
after a code review.
|
|
Fixed the `CellularRadio::getCarrier` implementation to use MCC/MNC
combination from the SIM intead of the serving cell.
Historically the implementation used MCC/MNC data from the cell that
is currently serving the device and provides the registration. This
MCC/MNC code is different from those of the home network in case of
a roaming - the network/carrier that provided the SIM is different
from the one who serves the device at the moment.
The more correct way to determine home carrier for GSM/UMTS/LTE devices
is to read first 5 or 6 digits of the SIM IMSI than encode the carrier.
This commit updates the implementation to use SIM IMSI as a source of
truth for the home network/carrier code.
|
|
Extended the implementation of "getSimCarrierCode" to detect the carrier
(home network) based on the MCC/MNC combination.
Historically mPower used ICCIDs to detect the carrier and apply the
carrier-specific settings. ICCIDs are known for Verizon and AT&T, but
the list of known ICCIDs is not exhaustive.
This change allows the firmware to detect more AT&T SIM cards by using
the MCC/MNC combinations (PLMN IDs) when ICCID is not recognized.
Limitation: The SIM shall be relatively new and report its MNC length,
otherwise MCC/MNC can't be determined and so the carrier code.
|
|
Added an ability to read the PLMN ID (MCC/MNC combination) of the home
carrier from the SIM.
SIM PLMN ID is a part of the IMSI that contains identifier of the home
network. PLMN ID in turn consists of 3-digit MCC (country code) and
2-or-3-digit MNC (network code). The length of the MNC is stored in the
SIM Elementary File called "Administrative Data" (EFad for short).
The purpose of the new functions is to extract PLMN ID from the SIM
if this information is available.
|
|
Added three additional MCC/MNC combinations for the FirstNet networks.
Those combinations were discovered on a 5SG1 radio in the output of
`AT#FWPLS=0,0`.
|
|
Added the 'Carrier Code' field to the MCC/MNC table. The new field is
supposed to be a constant Multitech-specific indentifier that is constant
between the firmware versions and does not necessarily depends on a
carrier name.
In particular the new field is needed to detect when there is an AT&T
SIM card inserted and 'UE mode of operation' shall be set to CS/PS mode 2.
|
|
Added one lost MCC/MNC entry for the FirstNet network (PLMN ID 313100)
and removed a duplicate MCC/MNC entry for PLMN ID 344930.
|
|
Added AT&T-related MCC/MNC values that were discovered from the AT+COPN output:
- 33490 - discovered on 5SG1, L4E1, L4G1 and LEU7;
- 901044 - discovered on 5SG1, L4E1 and L4G1;
- 90118 - discovered on H5 and LNA3.
|
|
Updated the MCC/MNC table for AT&T using the document from ITU
(https://www.itu.int/dms_pub/itu-t/opb/sp/T-SP-E.212B-2018-PDF-E.pdf).
Notable changes:
- filled empty carrier names for a bunch of MCC/MNC combinations;
- changed the carrier for PLMN ID "310280" from "T-Mobile" to "AT&T Wireless Inc.";
- added 7 new PLMN IDs that correspond to AT&T in various countries.
|
|
Sorted the MCC/MNC table by PLMN ID to simplify its maintenance.
The content and the format are not changed, only the order of items
in the table.
|
|
Restored the original table of MCC/MNC values that was used to populate
the `MTS_IO_MccMncTable.cpp` file.
This step is required to extend the format of MCC/MNC table with
additional fields and re-generate the file based on new data instead of
changing all the lines by hand.
Also added a script that restores the MCC/MNC table from a CPP file.
|
|
Extended `create-mcc-mnc-table.py` to support writing the resulting
CPP code directly to the target file:
- refactoring: renamed `print_cpp_mcc_mnc_table` to `print_cpp_mcc_mnc_create_table`
to better represent its purpose - printing the body of `MccMncTable::createTable()`;
- refactoring: grouped all the `print_cpp_*` functions to the single `print_cpp` function;
- new feature: printing the code directly to the target file without using stdout;
printing to stdout is used by default for compatibility reasons.
|
|
Extended `create-mcc-mnc-table.py` for CSV support:
- refactoring: renamed the 'network' variable to 'carrier' as it's
named 'carrier' in the CPP code;
- new feature: added support of command-line arguments to select
the source between the website and CSV; the website is used by
default for compatibility reasons.
|
|
Removed MCCs that are not listed by ITU.
|
|
Refactored the `create-mcc-mnc-table.py` script to support generating
`MTS_IO_MccMncTable.cpp` from the website and (in the future) csv files.
The previous script contained a lot of logic related to generating the
MCC/MNC tables in C++ code:
1) printing constant data - functions, comments, etc;
2) formatting and printing the lines with MCC/MNC data;
3) converting MCC and MNC values to unique integers (hashes);
4) parsing the data from the website.
The updated implementation of the script have separated step 4 from all
the other steps which allows to extend the MCC/MNC building logic with
loading MCC/MNC values from a `csv` file in the future.
The behaviour of the script is NOT changed during refactoring. Both the
old and the new version of the script generate exactly the same code
when started on the same source data (website).
|
|
Ported the "generate_mcc_mnc_cpp.py" script to Python 3.
Python 2 is not supported anymore and is not included to the modern
distributions of Linux. The transformation is made mainly by `2to3`
without refactoring and with only minimal changes required to support
Python 3.
|
|
Fixed carrier MCC/MNC table lookup for networks with two-digit conuntry codes.
The original MCC/MNC population script used the following encoding for MCC/MNC values:
- MCC - interpret the original value as hex;
- 2-digit MNC - append "f" and interpret the resulting value as hex;
- 3-digit MNC - interpret the original value as hex.
So during lookup the system shall also use this conversion logic before querying
the information from the table.
|
|
[MTX-3998] mPower R. Apr 2021: +CEMODE shall be set to CEMODE=2 - Quectel - GP-1111
See merge request !38
|
|
GP-1111
Refactoring after review
|
