From b23d1d80a23e8ce1910ba7c5006a4fddf3325c7d Mon Sep 17 00:00:00 2001 From: Jesse Gilles Date: Tue, 28 Jun 2011 15:16:57 -0500 Subject: initial work on multitech bitbake layer for CoreCDP --- conf/bblayers.conf | 4 ++ conf/local.conf | 126 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 130 insertions(+) create mode 100644 conf/bblayers.conf create mode 100644 conf/local.conf (limited to 'conf') diff --git a/conf/bblayers.conf b/conf/bblayers.conf new file mode 100644 index 0000000..be77226 --- /dev/null +++ b/conf/bblayers.conf @@ -0,0 +1,4 @@ +LCONF_VERSION = "1" +BBFILES ?= "" +BBPATH = "${OETREE}" +BBLAYERS = "${OETREE}/openembedded ${OETREE}/multitech" diff --git a/conf/local.conf b/conf/local.conf new file mode 100644 index 0000000..4317cc4 --- /dev/null +++ b/conf/local.conf @@ -0,0 +1,126 @@ +# +# Multi-Tech OpenEmbedded config +# +# Please visit the Wiki at http://openembedded.org/ for more info. +# +# WARNING: lines starting with a space (' ') will result in parse failures. +# Remove '# ' from commented lines to activate them. +# +# NOTE: Do NOT use $HOME in your paths, BitBake does NOT expand ~ for you. If you +# must have paths relative to your homedir use ${HOME} (note the {}'s there +# you MUST have them for the variable expansion to be done by BitBake). Your +# paths should all be absolute paths (They should all start with a / after +# expansion. Stuff like starting with ${HOME} or ${TOPDIR} is ok). + +# Use this to specify where BitBake should place the downloaded sources into +DL_DIR = "${OETREE}/sources" + +# Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files +# This is a regular expression, so be sure to get your parenthesis balanced. +BBMASK = "" + +# Uncomment this if you want to use a prebuilt toolchain. You will need to +# provide packages for toolchain and additional libraries yourself. You also +# have to set PATH in your environment to make sure BitBake finds additional binaries. +# ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc" + +# Uncomment this if you're building for an arch that uses emulated locale +# generation under qemu (mainly arm glibc) and have an external gcc 3.x compiler +# that OE recognises. This will mean the gcc-native build is skipped, speeding +# builds up. +# ASSUME_PROVIDED += "gcc3-native" + +# Select between multiple alternative providers, if more than one is eligible. +PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie" +PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-x11" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-intermediate:gcc-cross-intermediate" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross" + +# Uncomment this to specify where BitBake should create its temporary files. +# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard +# disk space, so make sure to free enough space. The default TMPDIR is +# /tmp +# Don't use symlinks in in the path to avoid problems +TMPDIR = "${OETREE}/build/tmp" + +# Set machine type, which also sets TARGET_ARCH +MACHINE = "mtcdp" + +# Use Multi-Tech CoreCDP distribution +DISTRO = "corecdp" + +# So far, angstrom.conf sets ENABLE_BINARY_LOCALE_GENERATION +# to generate binary locale packages at build time using qemu-native and +# thereby guarantee i18n support on all devices. If your build breaks on +# qemu-native consider disabling ENABLE_BINARY_LOCALE_GENERATION (note that +# this breaks i18n on devices with less than 128MB RAM) or installing +# a working third-party qemu (e.g. provided by your distribution) and +# adding qemu-native to ASSUME_PROVIDED. Caveat emptor, since third-party +# qemus lack patches needed to work with various OE targets. +ENABLE_BINARY_LOCALE_GENERATION = "0" +# ASSUME_PROVIDED += "qemu-native" + +# If ENABLE_BINARY_LOCALE_GENERATION is set to "1", you can limit locales +# generated to the list provided by GLIBC_GENERATE_LOCALES. This is huge +# time-savior for developmental builds. Format: list of locale.encoding pairs +# with spaces as separators. +# GLIBC_GENERATE_LOCALES = "en_US.UTF-8 en_GB.UTF-8 de_DE.UTF-8" + +# Add the required image file system types below. Valid are +# jffs2, tar(.gz|bz2), cpio(.gz), cramfs, ext2(.gz), ext3(.gz) +# squashfs, squashfs-lzma +IMAGE_FSTYPES = "jffs2 tar" + +# Uncomment this if you want to keep the temporary rootfs +# diretory, this can be useful during development. +# (Note that this rootfs is NOT usuable as NFS export.) +IMAGE_KEEPROOTFS = "1" + +# Uncomment this to remove unpacked source and intermediate work +# after successfully building a package. +# Saves a LOT of disk space, but leaving work around is useful for debugging. +# INHERIT += "rm_work" + +# Uncomment this if you want BitBake to emit debugging output +# BBDEBUG = "yes" + +# Uncomment these two if you want BitBake to build images useful for debugging. +# Note that INHIBIT_PACKAGE_STRIP needs a package format to be defined. +# Also note that OE now produces -dbg packages which contain debugging symbols. +# DEBUG_BUILD = "1" +# INHIBIT_PACKAGE_STRIP = "1" + +# Uncomment these to build a package such that you can use gprof to profile it. +# NOTE: This will only work with 'linux' targets, not +# 'linux-uclibc', as uClibc doesn't provide the necessary +# object files. Also, don't build glibc itself with these +# flags, or it'll fail to build. +# +# PROFILE_OPTIMIZATION = "-pg" +# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}" +# LDFLAGS =+ "-pg" + +# Uncomment this to enable parallel make. +# This allows make to spawn mutliple processes to take advantage of multiple +# processors. Useful on SMP machines. This may break some packages - we're +# in the process of marking these so let us know if you find any. +PARALLEL_MAKE = "-j 2" + +# Uncomment to run multiple bitbake threads in parallel. +# Bitbake can do multiple jobs in parallel: Its a good idea make use of +# all available resources: e.g. to download sources while some other +# piece of software is compiled. +BB_NUMBER_THREADS = "2" + +# Uncomment this if you want BitBake to emit the log if a build fails. +BBINCLUDELOGS = "yes" + +# Specifies a location to search for pre-generated tarballs when fetching +# a cvs:// URI. Outcomment this, if you always want to pull directly from CVS. +#CVS_TARBALL_STASH = "" + +# Uncomment this if you want to install shared libraries directly under their SONAME, +# rather than installing as the full version and symlinking to the SONAME. +# PACKAGE_SNAP_LIB_SYMLINKS = "1" -- cgit v1.2.3