From 9e0ea3e0e27fc4dcd9da578309aa230875640afb Mon Sep 17 00:00:00 2001
From: Mike Fiore <mfiore@multitech.com>
Date: Mon, 29 Apr 2013 11:44:31 -0500
Subject: Revert "at91bootstrap: add patch for mtocgd"

This reverts commit 68c9fc1875d00dcc233b3a83ac85acc810c41280.
---
 .../mtocgd/at91bootstrap-3.5.3-mtocgd.patch        | 63 ----------------------
 1 file changed, 63 deletions(-)
 delete mode 100644 multitech/recipes/at91bootstrap/at91bootstrap-3.5.3/mtocgd/at91bootstrap-3.5.3-mtocgd.patch

diff --git a/multitech/recipes/at91bootstrap/at91bootstrap-3.5.3/mtocgd/at91bootstrap-3.5.3-mtocgd.patch b/multitech/recipes/at91bootstrap/at91bootstrap-3.5.3/mtocgd/at91bootstrap-3.5.3-mtocgd.patch
deleted file mode 100644
index 4e3aac0..0000000
--- a/multitech/recipes/at91bootstrap/at91bootstrap-3.5.3/mtocgd/at91bootstrap-3.5.3-mtocgd.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig
-===================================================================
---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-04-11 05:07:35.000000000 -0500
-+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-04-24 11:49:10.237842512 -0500
-@@ -42,7 +42,8 @@
- ALLOW_PIO3=y
- CONFIG_HAS_PIO3=y
- CPU_HAS_PMECC=y
--CONFIG_LOAD_ONE_WIRE=y
-+# MTS: don't load one wire
-+# CONFIG_LOAD_ONE_WIRE is not set
- # CONFIG_MMC_SUPPORT is not set
- 
- #
-@@ -81,8 +82,8 @@
- #
- # PMECC Configuration
- #
--CONFIG_PMECC_CORRECT_BITS_2=y
--# CONFIG_PMECC_CORRECT_BITS_4 is not set
-+# CONFIG_PMECC_CORRECT_BITS_2 is not set
-+CONFIG_PMECC_CORRECT_BITS_4=y
- # CONFIG_PMECC_CORRECT_BITS_8 is not set
- # CONFIG_PMECC_CORRECT_BITS_12 is not set
- # CONFIG_PMECC_CORRECT_BITS_24 is not set
-@@ -116,4 +117,5 @@
- # CONFIG_USER_HW_INIT is not set
- CONFIG_THUMB=y
- CONFIG_SCLK=y
--CONFIG_DISABLE_WATCHDOG=y
-+# MTS: don't disable watchdog
-+# CONFIG_DISABLE_WATCHDOG is not set
-Index: at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c
-===================================================================
---- at91bootstrap-3.5.3.orig/board/at91sam9x5ek/at91sam9x5ek.c	2013-04-11 05:07:35.000000000 -0500
-+++ at91bootstrap-3.5.3/board/at91sam9x5ek/at91sam9x5ek.c	2013-04-24 11:53:09.981847111 -0500
-@@ -312,10 +312,9 @@
- 
- 	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
- 	reg |= AT91C_EBI_CS3A_SM;
--	if (get_cm_rev() == 'A')
--		reg &= ~AT91C_EBI_NFD0_ON_D16;
--	else
--		reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
-+	/* MTR2 Rev A NAND is on D0-D7, DDR_MP_EN must be disabled */
-+	reg &= ~AT91C_EBI_NFD0_ON_D16;
-+	reg &= ~AT91C_EBI_DDR_MP_EN;
- 
- 	reg &= ~AT91C_EBI_DRV;
- 	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);
-@@ -345,10 +344,8 @@
- 		AT91C_BASE_SMC + SMC_CTRL3);
- 
- 	/* Configure the PIO controller */
--	if (get_cm_rev() == 'A')
--		pio_configure(nand_pins_lo);
--	else
--		pio_configure(nand_pins_hi);
-+	/* MTR2 */
-+	pio_configure(nand_pins_lo);
- 
- 	writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC));
- }
-- 
cgit v1.2.3