add support for mtr rev-b

2 files changed, 211 insertions, 0 deletions

diff --git a/io-module/mts_io.c b/io-module/mts_io.c
index b20a5f8..ba55a1b 100644
--- a/io-module/mts_io.c
+++ b/io-module/mts_io.c
@@ -782,6 +782,206 @@ static struct gpio_pin gpio_pins_mtr_0_0[] = {
 	{ },
 };
 
+static struct gpio_pin gpio_pins_mtr_0_1[] = {
+	{
+		.name = "NETH_RST",
+		.attr_name = "eth0-enabled",
+		.pin = AT91_PIN_PC6,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+	},
+	{
+		.name = "3G_RST",
+		.attr_name = "radio-reset",
+		.pin = AT91_PIN_PA22,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 1,
+	},
+	{
+		.name = "3G_ONOFF",
+		.attr_name = "radio-enabled",
+		.pin = AT91_PIN_PA21,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 1,
+	},
+	{
+		.name = "DEVICE_RESET",
+		.attr_name = "reset",
+		.pin = AT91_PIN_PC4,
+		.direction = GPIO_DIR_INPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LS_LED",
+		.attr_name = "led-ls",
+		.pin = AT91_PIN_PC16,
+#if LED_LS_CONTROLLABLE
+		.direction = GPIO_DIR_OUTPUT,
+#else
+		.direction = GPIO_DIR_INPUT,
+#endif
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "STATUS_LED",
+		.attr_name = "led-status",
+		.pin = AT91_PIN_PC21,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.attr_name = "led-wifi",
+		.pin = AT91_PIN_PC15,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.attr_name = "led-b",
+		.pin = AT91_PIN_PC15,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.attr_name = "led-cd",
+		.pin = AT91_PIN_PC20,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.attr_name = "led-c",
+		.pin = AT91_PIN_PC20,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.attr_name = "led-sig1",
+		.pin = AT91_PIN_PC19,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.attr_name = "led-d",
+		.pin = AT91_PIN_PC19,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.attr_name = "led-sig2",
+		.pin = AT91_PIN_PC18,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.attr_name = "led-e",
+		.pin = AT91_PIN_PC18,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.attr_name = "led-sig3",
+		.pin = AT91_PIN_PC17,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.attr_name = "led-f",
+		.pin = AT91_PIN_PC17,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "RI_B",
+		.attr_name = "extserial-ri",
+		.pin = AT91_PIN_PC25,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "DTR_B",
+		.attr_name = "extserial-dtr",
+		.pin = AT91_PIN_PC26,
+		.direction = GPIO_DIR_INPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "DSR_B",
+		.attr_name = "extserial-dsr",
+		.pin = AT91_PIN_PC27,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "DCD_B",
+		.attr_name = "extserial-dcd",
+		.pin = AT91_PIN_PC28,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 1,
+		.use_pullup = 0,
+		.active_low = 1,
+	},
+	{
+		.name = "BT_EN",
+		.attr_name = "bt-enabled",
+		.pin = AT91_PIN_PA28,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+	},
+	{
+		.name = "WLAN_EN",
+		.attr_name = "wlan-enabled",
+		.pin = AT91_PIN_PA27,
+		.direction = GPIO_DIR_OUTPUT,
+		.output_value = 0,
+		.use_pullup = 0,
+	},
+	{ },
+};
 
 struct gpio_pin *gpio_pin_by_name(const char *name) {
 	struct gpio_pin *pin;
@@ -2381,6 +2581,15 @@ static int mts_id_eeprom_load(void)
 		has_spi_dout = 0;
 		has_spi_temp = 0;
 		log_info("detected board %s", HW_VERSION_MTR_0_0);
+	} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTR_0_1, strlen(HW_VERSION_MTR_0_1)) == 0) {
+		attr_group = &mtr_platform_attribute_group;
+		gpio_pins = gpio_pins_mtr_0_1;
+		mts_product_id = MTR_0_1;
+		has_spi_sout = 0;
+		has_spi_din = 0;
+		has_spi_dout = 0;
+		has_spi_temp = 0;
+		log_info("detected board %s", HW_VERSION_MTR_0_1);
 	} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTOCGD3_0_0, strlen(HW_VERSION_MTOCGD3_0_0)) == 0) {
 		attr_group = &mtr2_platform_attribute_group;
 		gpio_pins = gpio_pins_mtr2_0_0;
diff --git a/io-module/mts_io.h b/io-module/mts_io.h
index 4d6a1bd..a8d302e 100644
--- a/io-module/mts_io.h
+++ b/io-module/mts_io.h
@@ -38,6 +38,7 @@ struct device_attribute _dev_name = { \
 #define HW_VERSION_MT100EOCG_0_0		"MT100EOCG-0.0"
 #define HW_VERSION_MTR2_0_0				"MTR2-0.0"
 #define HW_VERSION_MTR_0_0				"MTR-0.0"
+#define HW_VERSION_MTR_0_1				"MTR-0.1"
 #define HW_VERSION_MTOCGD3_0_0			"MTOCGD3-0.0"
 
 enum {
@@ -46,6 +47,7 @@ enum {
 	MT100EOCG_0_0,
 	MTR2_0_0,
 	MTR_0_0,
+	MTR_0_1,
 	MTOCGD3_0_0,
 };