From e8bb3a14ac560f5f13f9fbb87b6007e361f1b3d0 Mon Sep 17 00:00:00 2001 From: John Klug Date: Fri, 26 Aug 2016 17:12:54 -0500 Subject: Add hostap-daemon version 2.4 --- .../hostapd/hostap-daemon-2.4/defconfig | 319 +++++++++++++++++++++ .../hostapd/hostap-daemon-2.4/init | 37 +++ recipes-connectivity/hostapd/hostap-daemon.inc | 12 + recipes-connectivity/hostapd/hostap-daemon_2.4.bb | 37 +++ 4 files changed, 405 insertions(+) create mode 100644 recipes-connectivity/hostapd/hostap-daemon-2.4/defconfig create mode 100644 recipes-connectivity/hostapd/hostap-daemon-2.4/init create mode 100644 recipes-connectivity/hostapd/hostap-daemon.inc create mode 100644 recipes-connectivity/hostapd/hostap-daemon_2.4.bb (limited to 'recipes-connectivity/hostapd') diff --git a/recipes-connectivity/hostapd/hostap-daemon-2.4/defconfig b/recipes-connectivity/hostapd/hostap-daemon-2.4/defconfig new file mode 100644 index 0000000..321b7c1 --- /dev/null +++ b/recipes-connectivity/hostapd/hostap-daemon-2.4/defconfig @@ -0,0 +1,319 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +CONFIG_LIBNL32=y + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$ +#LIBS += -L$ + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +#CONFIG_LIBNL32=y + + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-pwd for the integrated EAP server (secure authentication with a password) +#CONFIG_EAP_PWD=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +CONFIG_WPS_UPNP=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# EAP-EKE for the integrated EAP server +#CONFIG_EAP_EKE=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +CONFIG_WNM=y + +# IEEE 802.11ac (Very High Throughput) support +CONFIG_IEEE80211AC=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y + +# Add support for writing debug log to a file: -f /tmp/hostapd.log +# Disabled by default. +#CONFIG_DEBUG_FILE=y + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Remove support for RADIUS accounting +#CONFIG_NO_ACCOUNTING=y + +# Remove support for RADIUS +#CONFIG_NO_RADIUS=y + +# Remove support for VLANs +#CONFIG_NO_VLAN=y + +# Enable support for fully dynamic VLANs. This enables hostapd to +# automatically create bridge and VLAN interfaces if necessary. +#CONFIG_FULL_DYNAMIC_VLAN=y + +# Use netlink-based kernel API for VLAN operations instead of ioctl() +# Note: This requires libnl 3.1 or newer. +#CONFIG_VLAN_NETLINK=y + +# Remove support for dumping internal state through control interface commands +# This can be used to reduce binary size at the cost of disabling a debugging +# option. +#CONFIG_NO_DUMP_STATE=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# hostapd depends on strong random number generation being available from the +# operating system. os_get_random() function is used to fetch random data when +# needed, e.g., for key generation. On Linux and BSD systems, this works by +# reading /dev/urandom. It should be noted that the OS entropy pool needs to be +# properly initialized before hostapd is started. This is important especially +# on embedded devices that do not have a hardware random number generator and +# may by default start up with minimal entropy available for random number +# generation. +# +# As a safety net, hostapd is by default trying to internally collect +# additional entropy for generating random data to mix in with the data +# fetched from the OS. This by itself is not considered to be very strong, but +# it may help in cases where the system pool is not initialized properly. +# However, it is very strongly recommended that the system pool is initialized +# with enough entropy either by using hardware assisted random number +# generator or by storing state over device reboots. +# +# hostapd can be configured to maintain its own entropy store over restarts to +# enhance random number generation. This is not perfect, but it is much more +# secure than using the same sequence of random numbers after every reboot. +# This can be enabled with -e command line option. The specified +# file needs to be readable and writable by hostapd. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal hostapd random pool can be disabled. +# This will save some in binary size and CPU use. However, this should only be +# considered for builds that are known to be used on devices that meet the +# requirements described above. +#CONFIG_NO_RANDOM_POOL=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +#CONFIG_TLS=openssl +CONFIG_TLS=internal + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. +CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. +#CONFIG_TLSV12=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +CONFIG_INTERNAL_LIBTOMMATH=y +ifndef CONFIG_INTERNAL_LIBTOMMATH +LTM_PATH=/usr/src/libtommath-0.39 +CFLAGS += -I$(LTM_PATH) +LIBS += -L$(LTM_PATH) +LIBS_p += -L$(LTM_PATH) +endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks. +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file +CONFIG_SQLITE=y + +# Testing options +# This can be used to enable some testing options (see also the example +# configuration file) that are really useful only for testing clients that +# connect to this hostapd. These options allow, for example, to drop a +# certain percentage of probe requests or auth/(re)assoc frames. +# +CONFIG_TESTING_OPTIONS=y + +# Automatic Channel Selection +# This will allow hostapd to pick the channel automatically when channel is set +# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in +# similar way. +# +# Automatic selection is currently only done through initialization, later on +# we hope to do background checks to keep us moving to more ideal channels as +# time goes by. ACS is currently only supported through the nl80211 driver and +# your driver must have survey dump capability that is filled by the driver +# during scanning. +# +# You can customize the ACS survey algorithm with the hostapd.conf variable +# acs_num_scans. +# +# Supported ACS drivers: +# * ath9k +# * ath5k +# * ath10k +# +# For more details refer to: +# http://wireless.kernel.org/en/users/Documentation/acs +# +CONFIG_ACS=y diff --git a/recipes-connectivity/hostapd/hostap-daemon-2.4/init b/recipes-connectivity/hostapd/hostap-daemon-2.4/init new file mode 100644 index 0000000..79f74b6 --- /dev/null +++ b/recipes-connectivity/hostapd/hostap-daemon-2.4/init @@ -0,0 +1,37 @@ +#!/bin/sh +DAEMON=/usr/sbin/hostapd +NAME=hostapd +DESC="HOSTAP Daemon" +ARGS="/etc/hostapd.conf -B" + +test -f $DAEMON || exit 0 + +set -e + +case "$1" in + start) + echo -n "Starting $DESC: " + start-stop-daemon -S -x $DAEMON -- $ARGS + echo "$NAME." + ;; + stop) + echo -n "Stopping $DESC: " + start-stop-daemon -K -x $DAEMON + echo "$NAME." + ;; + restart) + $0 stop + $0 start + ;; + reload) + echo -n "Reloading $DESC: " + killall -HUP $(basename ${DAEMON}) + echo "$NAME." + ;; + *) + echo "Usage: $0 {start|stop|restart|reload}" + exit 1 + ;; +esac + +exit 0 diff --git a/recipes-connectivity/hostapd/hostap-daemon.inc b/recipes-connectivity/hostapd/hostap-daemon.inc new file mode 100644 index 0000000..bee65fb --- /dev/null +++ b/recipes-connectivity/hostapd/hostap-daemon.inc @@ -0,0 +1,12 @@ +SRC_URI += " file://cfg80211.conf" + +do_install() { + install -d ${D}${sbindir} ${D}${sysconfdir}/init.d + install -m 0644 ${S}/hostapd.conf ${D}${sysconfdir} + install -m 0755 ${S}/hostapd ${D}${sbindir} + install -m 0755 ${S}/hostapd_cli ${D}${sbindir} + install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd + echo "WORKDIR is ${WORKDIR}, S is ${S}" >/tmp/jak.txt + + install -m 644 -D ${WORKDIR}/cfg80211.conf ${D}${sysconfdir}/modprobe.d/cfg80211.conf +} diff --git a/recipes-connectivity/hostapd/hostap-daemon_2.4.bb b/recipes-connectivity/hostapd/hostap-daemon_2.4.bb new file mode 100644 index 0000000..df9d305 --- /dev/null +++ b/recipes-connectivity/hostapd/hostap-daemon_2.4.bb @@ -0,0 +1,37 @@ +require hostap-daemon.inc + +HOMEPAGE = "http://hostap.epitest.fi" +SECTION = "kernel/userland" +LICENSE = "BSD-3-Clause" +LIC_FILES_CHKSUM = "file://README;md5=4d53178f44d4b38418a4fa8de365e11c" +DEPENDS = "libnl openssl" +SUMMARY = "User space daemon for extended IEEE 802.11 management" + +inherit update-rc.d +INITSCRIPT_NAME = "hostapd" + + +DEFAULT_PREFERENCE = "-1" + +SRC_URI += " \ + http://hostap.epitest.fi/releases/hostapd-${PV}.tar.gz \ + file://defconfig \ + file://init \ +" + +S = "${WORKDIR}/hostapd-${PV}/hostapd" + + +do_configure() { + install -m 0644 ${WORKDIR}/defconfig ${S}/.config +} + +do_compile() { + export CFLAGS="-MMD -O2 -Wall -g -I${STAGING_INCDIR}/libnl3" + make +} + +CONFFILES_${PN} += "${sysconfdir}/hostapd.conf" + +SRC_URI[md5sum] = "04578f3f2c3eb1bec1adf30473813912" +SRC_URI[sha256sum] = "6fe0eb6bd1c9cbd24952ece8586b6f7bd14ab358edfda99794e79b9b9dbd657f" -- cgit v1.2.3